How do I set up tcpip for a static IP?

QNX Newsgroups (Archives) comp.os.qnx
1

I am having trouble setting up QNX RTP with my @home cable modem. I do
have a static IP and nettrap can see my 3com509. It seems like the
network cfg util in photon only supports dynamic IPs. I would like to
bypass the network cfg util and just set it up manually. I have done
this before on QNX 4 but I am not sure if its exactly the same. QNX4
had a routedefault.txt file for the gateway, but I dont see a similar
file in RTP. If someone could give me some pointers, I would greatly
appreciate it.

Thanks
Geez



Sent via Deja.com http://www.deja.com/
Before you buy.

2

You can specify the IP address in the cfg util.
The gateway is also available in the cfg util.

<geezwhyme@my-deja.com> wrote in message news:8qp6mq$bn5$1@nnrp1.deja.com…

I am having trouble setting up QNX RTP with my @home cable modem. I do
have a static IP and nettrap can see my 3com509. It seems like the
network cfg util in photon only supports dynamic IPs. I would like to
bypass the network cfg util and just set it up manually. I have done
this before on QNX 4 but I am not sure if its exactly the same. QNX4
had a routedefault.txt file for the gateway, but I dont see a similar
file in RTP. If someone could give me some pointers, I would greatly
appreciate it.

Thanks
Geez



Sent via Deja.com > http://www.deja.com/
Before you buy.

3

Mario Charest <mcz@videotron.ca> wrote:

If all else fails:

slay io-net

io-net -del509 -pttcpip if=en0:X.X.X.X,default=Y.Y.Y.Y

Where X.X.X.X is your static ip address.
Y.Y.Y.Y is your gateway’s address (default route).

You can get your current el509 options from ‘pidin ar’.

-seanb

: You can specify the IP address in the cfg util.
: The gateway is also available in the cfg util.

: <geezwhyme@my-deja.com> wrote in message news:8qp6mq$bn5$1@nnrp1.deja.com…
:> I am having trouble setting up QNX RTP with my @home cable modem. I do
:> have a static IP and nettrap can see my 3com509. It seems like the
:> network cfg util in photon only supports dynamic IPs. I would like to
:> bypass the network cfg util and just set it up manually. I have done
:> this before on QNX 4 but I am not sure if its exactly the same. QNX4
:> had a routedefault.txt file for the gateway, but I dont see a similar
:> file in RTP. If someone could give me some pointers, I would greatly
:> appreciate it.
:>
:> Thanks
:> Geez
:>
:>
:>
:> Sent via Deja.com http://www.deja.com/
:> Before you buy.