pcmcia cards on qnx

QNX Newsgroups (Archives) comp.os.qnx
1

Well, first i want to sorry my english

if someone can help me how to i use my pcmcia card’s
on qnx
i have 2 card
1 - 3com noteworty 56k modem
2 - Ne2000 Compatible
anyone help me please
i’m new in qnx


tanks all

2

Previously, Mauro Dias Ribeiro wrote in comp.os.qnx:

Well, first i want to sorry my english

if someone can help me how to i use my pcmcia card’s
on qnx
i have 2 card
1 - 3com noteworty 56k modem
2 - Ne2000 Compatible
anyone help me please
i’m new in qnx

Run “pcmciatrap &” to start the Pcmcia Admin program. Check
what the admin find by running “pin”. If you see the cards
listed, fine. If not, you may have to add them to your
/etc/config/pcmcia.cards file. Sometimes you also have to
add resources to the /etc/config/pcmcia.cfg file.

Once the ethernet driver is visible with pin, you can start
Net.ether1000. The modem will appear as a serial port. You
might need to restart Dev.ser with the appropriate
parameters to get the /dev/ser##.




Mitchell Schoenbrun --------- maschoen@pobox.com

3

FYI, this is an answer for QNX4, not the free realtime platform!

Mitchell Schoenbrun <maschoen@pobox.com> wrote in message
news:Voyager.001012211134.7666A@schoenbrun.com…

Previously, Mauro Dias Ribeiro wrote in comp.os.qnx:
Well, first i want to sorry my english

if someone can help me how to i use my pcmcia card’s
on qnx
i have 2 card
1 - 3com noteworty 56k modem
2 - Ne2000 Compatible
anyone help me please
i’m new in qnx

Run “pcmciatrap &” to start the Pcmcia Admin program. Check
what the admin find by running “pin”. If you see the cards
listed, fine. If not, you may have to add them to your
/etc/config/pcmcia.cards file. Sometimes you also have to
add resources to the /etc/config/pcmcia.cfg file.

Once the ethernet driver is visible with pin, you can start
Net.ether1000. The modem will appear as a serial port. You
might need to restart Dev.ser with the appropriate
parameters to get the /dev/ser##.




Mitchell Schoenbrun --------- > maschoen@pobox.com

4

Well Dang, he didn’t say.


Previously, Stephen Thomas wrote in comp.os.qnx:

FYI, this is an answer for QNX4, not the free realtime platform!

Mitchell Schoenbrun <> maschoen@pobox.com> > wrote in message
news:> Voyager.001012211134.7666A@schoenbrun.com> …
Previously, Mauro Dias Ribeiro wrote in comp.os.qnx:
Well, first i want to sorry my english

if someone can help me how to i use my pcmcia card’s
on qnx
i have 2 card
1 - 3com noteworty 56k modem
2 - Ne2000 Compatible
anyone help me please
i’m new in qnx

Run “pcmciatrap &” to start the Pcmcia Admin program. Check
what the admin find by running “pin”. If you see the cards
listed, fine. If not, you may have to add them to your
/etc/config/pcmcia.cards file. Sometimes you also have to
add resources to the /etc/config/pcmcia.cfg file.

Once the ethernet driver is visible with pin, you can start
Net.ether1000. The modem will appear as a serial port. You
might need to restart Dev.ser with the appropriate
parameters to get the /dev/ser##.




Mitchell Schoenbrun --------- > maschoen@pobox.com



\

–
Mitchell Schoenbrun --------- maschoen@pobox.com