LinkSys LNE100TX NIC

QNX Newsgroups (Archives) comp.os.qnx
1

Hello:

I’m using QNX 4.25. I have a LinkSys LNE100TX NIC but cannot get it to
work. The chip on the card is version 2. When I run Net.tulip, I get the error:

“rI# nit:unable to locate adapter”.

I’ve tried the “-c168” option as was suggested in QNX’s knowledge base, e.g.:

Net.tulip -c168 -t3 -l1 -I0 -w100 -F &

but to no avail.

Has anyone got this card to work?

One of the reasons I use this card is that I Multi-boot Windows 98,
Windows 2000, RedHat Linux, and QNX, and the card is working in all of
those OS’s except QNX. If only I could get it to work in QNX :slight_smile:

If I can’t get this card to work in QNX, does anyone have any
recommendations for a NIC that will work in Windows 98, Windows 2000,
RedHat Linux, and QNX?

Thanks

Matt Brunk

2

Previously, Matt Brunk wrote in comp.os.qnx:

I’m using QNX 4.25. I have a LinkSys LNE100TX NIC but cannot get it to
work. The chip on the card is version 2. When I run Net.tulip, I get the error:
“rI# nit:unable to locate adapter”.

It has been rumored from QSSL that this card appears with
more than incompatible controller chip. The chip on the
card you are attempting to use is probably not supported
by QSSL.

Mitchell Schoenbrun --------- maschoen@pobox.com

3

Check out:
http://staff.qnx.com/~cdm/networking/index.html

for an unoffical driver for this card

“Matt Brunk” <brunk@gorge.net> wrote in message
news:3A6697D5.D28C44F0@gorge.net…

Hello:

I’m using QNX 4.25. I have a LinkSys LNE100TX NIC but cannot get it to
work. The chip on the card is version 2. When I run Net.tulip, I get the
error:

“rI# nit:unable to locate adapter”.

I’ve tried the “-c168” option as was suggested in QNX’s knowledge base,
e.g.:

Net.tulip -c168 -t3 -l1 -I0 -w100 -F &

but to no avail.

Has anyone got this card to work?

One of the reasons I use this card is that I Multi-boot Windows 98,
Windows 2000, RedHat Linux, and QNX, and the card is working in all of
those OS’s except QNX. If only I could get it to work in QNX > :slight_smile:

If I can’t get this card to work in QNX, does anyone have any
recommendations for a NIC that will work in Windows 98, Windows 2000,
RedHat Linux, and QNX?

Thanks

Matt Brunk

4

Chris Foran wrote:

Check out:
http://staff.qnx.com/~cdm/networking/index.html

for an unoffical driver for this card

This looks like it’s for QNX RTP? I was looking for something that will
work with QNX 4.25.

5

You are correct. My mistake.

Previously, Matt Brunk wrote in comp.os.qnx:

Chris Foran wrote:

Check out:
http://staff.qnx.com/~cdm/networking/index.html

for an unoffical driver for this card

This looks like it’s for QNX RTP? I was looking for something that will
work with QNX 4.25.