QNX RTP driver for Bt8xx ?

I want to port a program for the solution of an optical positioning problem
from RTKernel to QNX RTP. To grab images from our camera i need a driver
for a Bt848 based TV card or for the frame grabber PXC-100 (lo cost variant
of PXC-200, only one camera supported) from Image Nation.

Can someone tell me whether there are QNX RTP drivers available for one
of this cards and where to find them.

Thanks in advance,

Daniel Andres

I’m also intrested if there exists any drivers, or if anybody is working on
drivers.
Alessandro Rubini (alessandro.rubini@linux.it) has built drivers for Linux
is porting them easy or a big rework?
The linux drivers can be found at:
ftp.systemy.it/pub/develop

By the way is this the right group for these questions?

Regards,
Jonas Nygårds
“daniel andres” <andres@eit.uni-kl.de> wrote in message
news:GDrM6.222451$Sv5.5103065@news.easynews.com

I want to port a program for the solution of an optical positioning
problem
from RTKernel to QNX RTP. To grab images from our camera i need a driver
for a Bt848 based TV card or for the frame grabber PXC-100 (lo cost
variant
of PXC-200, only one camera supported) from Image Nation.

Can someone tell me whether there are QNX RTP drivers available for one
of this cards and where to find them.

Thanks in advance,

Daniel Andres

I just worked out the bt848 frame grabber driver for QNX RTP and
QNX4.2x.Give me your requirements, or contact me by sending me a
email.

The source code for bt848 on linux is very helpful, although it is
really hard to understand it. It will be very very hard to port the
bt848 framegarbber from linux to QNX. I have tried to do it and gave
up at last. If you really want to port it, my advice is hack and
understand it first, then write the driver yourself.

Have a nice day.
Darsi

darsiz@yahoo.ca

“Jonas Nyg?ds” <jonny@nospam.ikp.liu.se> wrote in message
news:<9hs1v7$2rd$1@inn.qnx.com>…> I’m also intrested if there exists
any drivers, or if anybody is working on> drivers.> Alessandro Rubini
(alessandro.rubini@linux.it) has built drivers for Linux> is porting
them easy or a big rework?> The linux drivers can be found at:>
ftp.systemy.it/pub/develop> > By the way is this the right group for
these questions?> > Regards,> Jonas Nygårds> “daniel andres”
<andres@eit.uni-kl.de> wrote in message>
news:GDrM6.222451$Sv5.5103065@news.easynews.com…> > I want to port a
program for the solution of an optical positioning> problem> > from
RTKernel to QNX RTP. To grab images from our camera i need a driver> >
for a Bt848 based TV card or for the frame grabber PXC-100 (lo cost>
variant> > of PXC-200, only one camera supported) from Image Nation.>

Can someone tell me whether there are QNX RTP drivers available
for one> > of this cards and where to find them.> >> > Thanks in

advance,> >> > Daniel Andres