Fujitsu 3400 Pen Tablets

QNX Newsgroups (Archives) comp.os.qnx
1

Does anyone know if the pen-based tablet for the Fujitsu 3400 is supported
under QNX?

Since It will run QNX Windows, and Photon, but the pointer will not follow
the pen on the screen. Could it be that they are using a non-standard way of
retrieving the information from the screen, and only Windows(Microsoft) is
allowed to get it. Or does anyone know of the address to look at to retieve
the information, to make a mouse device driver.

2

Sounds like you need a touch screen driver running to me… Do you know what
type of touch screen interface the Fujitsu has? I wrote wrote a driver for
the WASP protocol in a few days, and there is the DDK which was excellant.

–
Jerry Kirk
Nexware Corp. (http://www.nexwarecorp.com)
Software Development for the Embedded World
865.546.9998 x203


“Andrew Grafe” <agrafe@crisys.com> wrote in message
news:9srcl4$evu$1@inn.qnx.com…

Does anyone know if the pen-based tablet for the Fujitsu 3400 is supported
under QNX?

Since It will run QNX Windows, and Photon, but the pointer will not follow
the pen on the screen. Could it be that they are using a non-standard way
of
retrieving the information from the screen, and only Windows(Microsoft) is
allowed to get it. Or does anyone know of the address to look at to
retieve
the information, to make a mouse device driver.
\

3

I have submitted a request to level 2 support, hopefully that will give me
some information as to what type of technology they are using.

I have checked their web site, and their technical documentation is lacking
a lot of information. It describes the screen as:



Digitizer
Low Glare
Liquid Filled (for Stylistic 3400S only)
Passive Pen
Palm Rejection


and no metion of technology used.



“Jerry Kirk” <Jerry.Kirk@Nexwarecorp.com> wrote in message
news:<9ss0fk$rch$1@inn.qnx.com>…

Sounds like you need a touch screen driver running to me… Do you know
what



type of touch screen interface the Fujitsu has? I wrote wrote a driver for

the WASP protocol in a few days, and there is the DDK which was excellant.


\

Jerry Kirk

Nexware Corp. (> http://www.nexwarecorp.com> )

Software Development for the Embedded World

865.546.9998 x203





“Andrew Grafe” <> agrafe@crisys.com> > wrote in message

news:9srcl4$evu$> 1@inn.qnx.com> …

Does anyone know if the pen-based tablet for the Fujitsu 3400 is
supported



under QNX?



Since It will run QNX Windows, and Photon, but the pointer will not
follow



the pen on the screen. Could it be that they are using a non-standard
way



of

retrieving the information from the screen, and only Windows(Microsoft)
is



allowed to get it. Or does anyone know of the address to look at to

retieve

the information, to make a mouse device driver.








\