DE-660

For some reason I can’t figure out, my DE-660 PCMCIA
card is not recognize by QNX4 4.25D anymore.

I have no idea what cause it to fail. The setup works
with QRTP and Windows. So the hardware looks ok.

The device reports as Unknow. Other type of card
are recognized properly. I have recreate the
pcmcia.cards file from pin config >>pcmcia.cards,
but to no avail.

I’m at lost, Pcmcia.generic -v shows nothing.

By the way “use pin” is silent.

  • Mario

“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:Voyager.000831085834.20346C@qnx.com

Previously, Mario Charest wrote in qdn.public.qnx4:

For some reason I can’t figure out, my DE-660 PCMCIA
card is not recognize by QNX4 4.25D anymore.

I have no idea what cause it to fail. The setup works
with QRTP and Windows. So the hardware looks ok.

The device reports as Unknow. Other type of card
are recognized properly. I have recreate the
pcmcia.cards file from pin config >>pcmcia.cards,
but to no avail.

I’m at lost, Pcmcia.generic -v shows nothing.

By the way “use pin” is silent.


Has something changed in your resources file /etc/config/pcmcia.cfg?
Have you tried the DE-660 by itself in the machine? Have you by any
chance upgraded the O/S on your machine?

Not that I’m aware of :wink: That’s what I though too but I can related
to apperance of the problem to anything specific I’v done.

That’s why I upgrade to 4.25D.

I will get pcmcia.cfg from 4.25.



Hugh.

  • Mario


Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: > hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8

Previously, Mario Charest wrote in qdn.public.qnx4:

For some reason I can’t figure out, my DE-660 PCMCIA
card is not recognize by QNX4 4.25D anymore.

I have no idea what cause it to fail. The setup works
with QRTP and Windows. So the hardware looks ok.

The device reports as Unknow. Other type of card
are recognized properly. I have recreate the
pcmcia.cards file from pin config >>pcmcia.cards,
but to no avail.

I’m at lost, Pcmcia.generic -v shows nothing.

By the way “use pin” is silent.

Has something changed in your resources file /etc/config/pcmcia.cfg?
Have you tried the DE-660 by itself in the machine? Have you by any
chance upgraded the O/S on your machine?

Hugh.

  • Mario

Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8

Restoring the pcmcia.cfg file solve the problem.
I was so sure I didn’t played with it, oh well. Sorry
to have disturb you peace.

“Mario Charest” <mcharest@zinformatic.com> wrote in message
news:8omgtt$mkk$1@inn.qnx.com

“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:> Voyager.000831085834.20346C@qnx.com> …
Previously, Mario Charest wrote in qdn.public.qnx4:

For some reason I can’t figure out, my DE-660 PCMCIA
card is not recognize by QNX4 4.25D anymore.

I have no idea what cause it to fail. The setup works
with QRTP and Windows. So the hardware looks ok.

The device reports as Unknow. Other type of card
are recognized properly. I have recreate the
pcmcia.cards file from pin config >>pcmcia.cards,
but to no avail.

I’m at lost, Pcmcia.generic -v shows nothing.

By the way “use pin” is silent.


Has something changed in your resources file /etc/config/pcmcia.cfg?
Have you tried the DE-660 by itself in the machine? Have you by any
chance upgraded the O/S on your machine?


Not that I’m aware of > :wink: > That’s what I though too but I can related
to apperance of the problem to anything specific I’v done.

That’s why I upgrade to 4.25D.

I will get pcmcia.cfg from 4.25.



Hugh.

  • Mario


Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: > hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8