notwork card 3COM 920-Bk05 not detectable?

QNX Newsgroups (Archives) qdn.public.qnx4
1

Hello!

I got a very new PC with the network
card 3COM 920-Bk05
3C905.TX.M ETHERLINK 100/100 PCI

I´m unable to set up network with this computer.


I try the command:

Net & => it works
nettrap.start =>this only shows: slay Net
and no card is shown

I tried some network drivers Net.ether2100 e.g.,
some of them show initialisation error 4 or 10.
Some start without error, but iif I then enter:

#Socket -L -p1 node141.99.16.41& (this works)
#ifconfig en1 node141.99.16.41 up

the command “ifconfig” shows:
“node141.99.16.41: bad value”

Can you help me?

Ingo







Can you help me?

2

“Ingo Gross” <ingo.gross@zess.uni-siegen.de> wrote in message
news:3A2B6199.997176A5@zess.uni-siegen.de…

Hello!

I got a very new PC with the network
card 3COM 920-Bk05
3C905.TX.M ETHERLINK 100/100 PCI

Do you have the latest 4.25D patch I thing there
was some issue with Net.ether905.


I´m unable to set up network with this computer.


I try the command:

Net & => it works
nettrap.start =>this only shows: slay Net
and no card is shown

I tried some network drivers Net.ether2100 e.g.,
some of them show initialisation error 4 or 10.
Some start without error, but iif I then enter:

#Socket -L -p1 node141.99.16.41& (this works)
#ifconfig en1 node141.99.16.41 up

the command “ifconfig” shows:
“node141.99.16.41: bad value”

Can you help me?

Ingo







Can you help me?

3

Previously, Ingo Gross wrote in qdn.public.qnx4:

Hello!

I got a very new PC with the network
card 3COM 920-Bk05
3C905.TX.M ETHERLINK 100/100 PCI

I´m unable to set up network with this computer.

It sounds as though you have a 905C adapter. This adapter is
supported under the latest 4.25D patch update.

I try the command:

Net & => it works
nettrap.start =>this only shows: slay Net
and no card is shown

I tried some network drivers Net.ether2100 e.g.,
some of them show initialisation error 4 or 10.
Some start without error, but iif I then enter:

#Socket -L -p1 node141.99.16.41& (this works)
#ifconfig en1 node141.99.16.41 up

the command “ifconfig” shows:
“node141.99.16.41: bad value”

Can you help me?

Ingo







Can you help me?

\

–

Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8