Dev.par SIGFPE & memory fault

QNX Newsgroups (Archives) qdn.public.qnx4
#1

Hi all!

I have Dell PowerEdge13000 and Dell Optiplex with QNX 4.25D patch installed.
Sometimes Dev.par terminates with SIGFPE signal while starting from sysinit.
After login with delay 30-60 sec I can start it manually and it works fine!
Why? Maybe somebody know such situation?

Any help would be be greatly appreciated.

Oleg.

#2

Mityagin Oleg <mityagin@rlt.ru> wrote:

Hi all!

I have Dell PowerEdge13000 and Dell Optiplex with QNX 4.25D patch installed.
Sometimes Dev.par terminates with SIGFPE signal while starting from sysinit.
After login with delay 30-60 sec I can start it manually and it works fine!
Why? Maybe somebody know such situation?

Any help would be be greatly appreciated.

There is an updated Dev.par driver available that fixes this problem. Someone
should be chiming in from QA to tell you where it is.

#3

ThankS
<pete@qnx.com> ÐÉÛÅÔ × ÓÏÏÂÝÅÎÉÉ:90ip9c$8n$2@nntp.qnx.com…

Mityagin Oleg <> mityagin@rlt.ru> > wrote:
Hi all!

I have Dell PowerEdge13000 and Dell Optiplex with QNX 4.25D patch
installed.
Sometimes Dev.par terminates with SIGFPE signal while starting from
sysinit.
After login with delay 30-60 sec I can start it manually and it works
fine!
Why? Maybe somebody know such situation?

Any help would be be greatly appreciated.

There is an updated Dev.par driver available that fixes this problem.
Someone
should be chiming in from QA to tell you where it is.