<!doctype html public “-//w3c//dtd html 4.0 transitional//en”>
After applying the pach D (qnx425D), attempt to execute to Net.ether82557
with the parameter - P, but the obtained result is the following:
Net.ether82557 -l1 -s10 -P &
ParseArgs: Invalid Argument.
Someone can help me ?
Thank you
Daniel Espósito
Buenos Aires
Argentina
Responded via e-mail.
Previously, Daniel Esposito wrote in qdn.public.qnx4:
[ attachment ]
–
Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
“Daniel Esposito” <daesposito@movi.com.ar> wrote in message
news:3A2FB456.B187C5D4@movi.com.ar…
After applying the pach D (qnx425D), attempt to execute to Net.ether82557
with the parameter - P, but the obtained result is the following:
Net.ether82557 -l1 -s10 -P &
ParseArgs: Invalid Argument.
Someone can help me ?
Daniel,
try to
Net.ether82557 -MP &
it works fine with our qnx 4.25D
// wbr
Ian Zagorskih
Novosoft CyBearNet Department
Custom software development and web design since 1992
E-mail: ianzag@novosoft.ru
Phone: +7 (3832) 39-72-60, 39-72-61
Fax: +7 (3832) 39-63-58
For more visit www.novosoft-us.com
This was a QNX Oops! I have the same problem. Don’t use promiscuous mode.
If you must use promiscuous mode, use an older driver.
WAIT! I am still using -P. Try putting it first on the command line.
BTW, my driver is Net.ether82557 V4.25G dates Feb 17, 2000 from the ‘sin ve’
command.
Daniel Esposito <daesposito@movi.com.ar> wrote in message
news:3A2FB456.B187C5D4@movi.com.ar…
After applying the pach D (qnx425D), attempt to execute to Net.ether82557
with the parameter - P, but the obtained result is the following:
Net.ether82557 -l1 -s10 -P &
ParseArgs: Invalid Argument.
Someone can help me ?
Thank you
Daniel Espósito
Buenos Aires
Argentina