QNX 4.22 S3 video driver

Using the gr.s3mm video driver I get 3/4 of the screen with the bottom 1/4
unreadable.
I have tried all compatible drivers and this is the best I get. The test of
the driver works fine
and the same driver works perfect on another system with same video card.
Any help
Chip Toland
ctoland@atkinsbenham.com

if you swap video cards, does the problem follow the video card?

dynalogi@mindspring.com wrote:

Using the gr.s3mm video driver I get 3/4 of the screen with the bottom 1/4
unreadable.
I have tried all compatible drivers and this is the best I get. The test of
the driver works fine
and the same driver works perfect on another system with same video card.
Any help
Chip Toland
ctoland@atkinsbenham.com


Randy Martin randy@qnx.com
Manager of FAE Group, North America
QNX Software Systems www.qnx.com
175 Terence Matthews Crescent, Kanata, Ontario, Canada K2M 1W8
Tel: 613-591-0931 Fax: 613-591-3579

Hi Chip,

Are you using QNX Windows? or X11? If so we have a copy of the Scitech
display doctor that will probably help you out.

The display doctor is used to get newer vid cards working with QNX Windows
and X11 for QNX.

Contact your sales rep and they will have further information for you.



dynalogi@mindspring.com wrote:

Using the gr.s3mm video driver I get 3/4 of the screen with the bottom 1/4
unreadable.
I have tried all compatible drivers and this is the best I get. The test of
the driver works fine
and the same driver works perfect on another system with same video card.
Any help
Chip Toland
ctoland@atkinsbenham.com

Check if int10 is running and its version.

dynalogi@mindspring.com wrote:

Using the gr.s3mm video driver I get 3/4 of the screen with the bottom 1/4
unreadable.
I have tried all compatible drivers and this is the best I get. The test of
the driver works fine
and the same driver works perfect on another system with same video card.
Any help
Chip Toland
ctoland@atkinsbenham.com