QNX ver 4.24G crashing on ITOX computers

We are having problems installing QNX version 4.24G on some of our computers
that we ship to our customers. This problem only seems to happen on ITOX
computers. It works OK on Hewlett Packard and IBM Celeron computers.

What happens is this:
We load QNX and then our software on the computer. We then go to console 3
to try to login. At the login attempt, it appears that Proc32 generates a
SIGSEGV signal. This is the output we get:

Last login: on Aug 20 14:08:44 2001 on //1/dev/con1
Mon Aug 20 14:09:14 2001
stty: Interrupted function call
umask: Interrupted function call at 00E1:0012CBF
//1/bin/umask terminated (SIGSEGV) at 00E1:00012CBF

Version 4.24G Aug 25 1997 Technical Support: +1 613-591-0941
ProcFault! Idt 100sys/Proc32; Fault e+2
CS:EIP=5:12dd3 SS:ESD=D:F7C0Ef8 EF1=12246 DS=D ES=8 FS=0 GS=0
eax/11430 ebx/0 ecx/12EB8 EDX/0 ESI/338C ED1/1 EBP/F7C0F10
Stack(d:f7c0ef8)

00000001 0000bd08 000000dd 00000001 f000dfff 00000000 0f7c0f38
0000df57
00000001 00016d11 00000004 00016840 0000000 00000000 0000001 00000001
0f7c0f70 00000001 0000df50 00016785 0000000 00016966 0f7c9f69
00000000
0000df2f 00000001 0f6f7d40 00000001 0000021 0fbf89e8

Process Entry(addr ab5c)

This has so far only happened when we load QNX on ITOX computers. Has
anyone else run into similar problems?

Sincerely,
Adrian Vanko
Logistics
Command Alkon Corp.

This was a false alarm. Our manufacturing department noticed today that the
same problem happened on an non-ITOX computer. Looking at the problem, we
noticed that all of the computers this problem occurred with were computers
that had the same (bad) Zip drive (we used the same Zip drive on all of
them). So this was a Zip drive problem, not a QNX/ITOX problem.

Adrian Vanko
Logistics
Command Alkon Corp.

David de Leon wrote in message <9lrr08$meb$1@inn.qnx.com>…

We are having problems installing QNX version 4.24G on some of our
computers
that we ship to our customers. This problem only seems to happen on ITOX
computers. It works OK on Hewlett Packard and IBM Celeron computers.

What happens is this:
We load QNX and then our software on the computer. We then go to console 3
to try to login. At the login attempt, it appears that Proc32 generates a
SIGSEGV signal. This is the output we get:

Last login: on Aug 20 14:08:44 2001 on //1/dev/con1
Mon Aug 20 14:09:14 2001
stty: Interrupted function call
umask: Interrupted function call at 00E1:0012CBF
//1/bin/umask terminated (SIGSEGV) at 00E1:00012CBF

Version 4.24G Aug 25 1997 Technical Support: +1 613-591-0941
ProcFault! Idt 100sys/Proc32; Fault e+2
CS:EIP=5:12dd3 SS:ESD=D:F7C0Ef8 EF1=12246 DS=D ES=8 FS=0 GS=0
eax/11430 ebx/0 ecx/12EB8 EDX/0 ESI/338C ED1/1 EBP/F7C0F10
Stack(d:f7c0ef8)

00000001 0000bd08 000000dd 00000001 f000dfff 00000000 0f7c0f38
0000df57
00000001 00016d11 00000004 00016840 0000000 00000000 0000001
00000001
0f7c0f70 00000001 0000df50 00016785 0000000 00016966 0f7c9f69
00000000
0000df2f 00000001 0f6f7d40 00000001 0000021 0fbf89e8

Process Entry(addr ab5c)

This has so far only happened when we load QNX on ITOX computers. Has
anyone else run into similar problems?

Sincerely,
Adrian Vanko
Logistics
Command Alkon Corp.