Thanks for your help, recently my qnx can’t boot.
it appear the messages as below:
mount -p :can’t mount partition
238(0eeh)on /dev/hd0:error no space left on device
Have any method to solve this problem without re-partition hard disk?
sincerely
Sam /09/05
posalux.taiwan <posalux.taiwan@msa.hinet.net> wrote:
mount -p :can’t mount partition
238(0eeh)on /dev/hd0:error no space left on device
Have any method to solve this problem without re-partition hard disk?
You can try to boot off a floppy disk, and then mount the harddrive
manually when the floppy boot is complete. If indeed you are out of
space, you should take the opportunity to remove some files. If the
drive is completely full, it’s possible it will not mount/boot.
You can also try floppy booting, then mounting the HD readonly.
You should backup anything important, and reformat.
-Adam
amallory@qnx.com
Operating System for Tech Supp <os@qnx.com> wrote:
posalux.taiwan <> posalux.taiwan@msa.hinet.net> > wrote:
mount -p :can’t mount partition
238(0eeh)on /dev/hd0:error no space left on device
Have any method to solve this problem without re-partition hard disk?
Have you moved your harddrive lately (master/slave etc) ? Or have you
toggled LBA mode in your BIOS? This could also be a case of you
parition information not conforming to disk geometry.
-Adam
amallory@qnx.com