Still Have problems with pccard.

QNX Newsgroups (Archives) qdn.public.qnxrtp.newuser
1

Well, first tanks all who help’s me.

i’m running devp-pccard
enum-pccard
so i run pin
and pin returns to me that my two slots are empty
but the card’s are in the slot’s

any sugesttion
…

TANKS :slight_smile:

2

Mauro Dias Ribeiro wrote:

Well, first tanks all who help’s me.

i’m running devp-pccard
enum-pccard
so i run pin
and pin returns to me that my two slots are empty
but the card’s are in the slot’s

any sugesttion

other hints:

  • do not insert both of your pccard simultaneously - try to starts them
    separately
  • try in your bios to set Controller Mode = PCIC Compatible (if there is
    that option)
  • if you have M$ running on your laptop, check irqs and port addresses
    of pcmcia controller and plugged cards
  • modify memory section in /etc/config/pcmcia.cfg according to your M$
    configuration

Arek Benes

3

Previously, Mauro Dias Ribeiro wrote in qdn.public.qnxrtp.newuser:

Well, first tanks all who help’s me.

i’m running devp-pccard
enum-pccard
so i run pin
and pin returns to me that my two slots are empty
but the card’s are in the slot’s

any sugesttion
…

TANKS > :slight_smile:

Please post the output from ‘pci -v’. Thanks.

–

Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8