I installed within the Win95 platform…all is OK…Now I installed onto a
Toshiba Laptop running WinME.
I used a ‘patch’ to be able to boot into DOS …Re-boots hang allways…I
de-installed QNX and now it seemd
to blow away by boot track, it now says ‘non-system-disk’ . Good thing I
tryed this on an easily replaceable
harddrive. Oh also, it did not see the capacity of the big 1.2 Gig
Harddrive…
Has any one else tryed this on Win ME ??
Help
–
“People looking to serious, should be looking to Sirius”
“EAdams” <aexco@bright.net> wrote in message
news:91elf3$hp5$1@inn.qnx.com…
I installed within the Win95 platform…all is OK…Now I installed onto a
Toshiba Laptop running WinME.
I used a ‘patch’ to be able to boot into DOS …Re-boots hang allways…I
de-installed QNX and now it seemd
to blow away by boot track, it now says ‘non-system-disk’ . Good thing I
tryed this on an easily replaceable
harddrive. Oh also, it did not see the capacity of the big 1.2 Gig
Harddrive…Has any one else tryed this on Win ME ??
I had the same problem. I end up going back to Win98 since
WinMe was much slower. You can boot from the floppy instead
Help
Check out:
http://support.qnx.com/support/bok/solution.qnx?10054
Erick.
Mario Charest <mcharest@void_zinformatic.com> wrote:
–
- Mario
“People looking to serious, should be looking to Sirius”
“EAdams” <> aexco@bright.net> > wrote in message
news:91elf3$hp5$> 1@inn.qnx.com> …
I installed within the Win95 platform…all is OK…Now I installed onto a
Toshiba Laptop running WinME.
I used a ‘patch’ to be able to boot into DOS …Re-boots hang allways…I
de-installed QNX and now it seemd
to blow away by boot track, it now says ‘non-system-disk’ . Good thing I
tryed this on an easily replaceable
harddrive. Oh also, it did not see the capacity of the big 1.2 Gig
Harddrive…Has any one else tryed this on Win ME ??
I had the same problem. I end up going back to Win98 since
WinMe was much slower. You can boot from the floppy instead
Help