Joe,
Here is the info you requested:
Model Number - 3com 905C-TX
Command Line - ’ io-net -del900 -pttcpip’
After I start the network card, I use the network config dialog box in
photon to set my local ip address and netmask.
Are there any other settings that I should be giving attention to? My
network administrator says no, and that it should autodetect.
I also set the hostname under the network tab to a unique name for my pc
and the domain name to our corporate network. Everything
else I left blank. Is this right?
At the end of this message I have posted my pci -v output.
Thanks for your help,
Daniel
“Hardware Support Account” <hw@qnx.com> wrote in message
news:9cs412$2ip$1@nntp.qnx.com…
Hi Daniel,
Could you post the full model number of the 905 adapter, and the output
from ‘pci -v’.
Also, how are you starting the driver (command line).
Regards,
Joe
Daniel Ahrens <> danielahrens@fortna.com> > wrote:
Greetings all,
Here’s my problem…
Our company currently uses QNX 4.0 for our retail custom software
package.
My supervisor asked me to investigate the possibility of using Neutrino
as a
platform instead and I have been doing some beta testing.
One really big problem: I can’t connect to the network.
First of all, my network card is working ok under a windows environment,
so
it is not a bad card…
My machine has a 3com 905 card supporting UTP, and is recognized by the
nettrap and io-net commands. Neutrino names it en0, as it should. I have
entered all of the LAN addressing as per our network administrator, but
I
still cannot connect to anything. I know that there is some connection
that
is established, because before configuring the card, a ping command to
the
proxy server results in “no route to host”. After configuring, I can
ping
the proxy server, but I get “host is down”. The proxy server is in fact
not
down, as I can ping it sucessfully from my other machine running QNX 4.0
I have tried a plethora of options retrieved from the QNX helpviewer and
from the QNX knowledge base and from the QNX newsgroups, but still no
success. Could someone please lend a hand? I will be happy to provide
any
additional information should you need it.
Thanks in advance,
Daniel Ahrens
PCI version = 2.10
Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1130h, 82815 Host-Hub Interface Bridge / DRAM Ctrlr
PCI index = 0h
Class Codes = 060000h
Revision ID = 2h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = 88h
Capability ID = 9h
Capabilities = f104h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000207h
Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1131h, 82815 AGP Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 20h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = c0h
I/O Limit = c0h
Secondary Status = 22a0h
Memory Base = ff80h
Memory Limit = ff80h
Prefetchable Memory Base = ee90h
Prefetchable Memory Limit= f690h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 8ns
PCI Int Pin = NC
Interrupt line = 0
Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 80h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 40h
I/O Base = d0h
I/O Limit = d0h
Secondary Status = 2280h
Memory Base = ff90h
Memory Limit = ff90h
Prefetchable Memory Base = f6a0h
Prefetchable Memory Limit= f6a0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 2ns
PCI Int Pin = NC
Interrupt line = 0
Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 2440h, 82801BA LPC Interface Bridge
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = 10fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 244bh, 82801BA IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
IO Address = ffa0h length 16 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 4541h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2442h, 82801BA USB Controller
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
IO Address = ef80h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 4541h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 10
Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2443h, 82801BA SMBus Controller
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
IO Address = efa0h length 16 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 4541h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 9
Class = Display (VGA)
Vendor ID = 1002h, ATI Technologies
Device ID = 5046h, Rage Fury MAXX AGP4x
PCI index = 0h
Class Codes = 030000h
Revision ID = 0h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 87h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
Mem Address = f0000000h prefetchable 32bit length 67108864 enabled
IO Address = c800h length 256 enabled
Mem Address = ff8fc000h 32bit length 16384 enabled
Subsystem Vendor ID = 1002h
Subsystem ID = 404h
Expansion ROM = ff8c0000h length 131072 disabled
Max Lat = 0ns
Min Gnt = 8ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 50h
Capability ID = 2h
Capabilities = 20h - 1f000207h
Capability ID = 1h
Capabilities = 202h - 0h
Class = Network (Ethernet)
Vendor ID = 10b7h, 3Com Corporation
Device ID = 9200h, 3C905C-TX Fast EtherLink for PC Management NIC
PCI index = 0h
Class Codes = 020000h
Revision ID = 78h
Bus number = 2
Device number = 9
Function num = 0
Status Reg = 210h
Command Reg = 117h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
IO Address = dc00h length 128 enabled
Mem Address = ff9ffc00h 32bit length 128 enabled
Subsystem Vendor ID = 10b7h
Subsystem ID = 1000h
Expansion ROM = ff9c0000h length 131072 disabled
Max Lat = 10ns
Min Gnt = 10ns
PCI Int Pin = INT A
Interrupt line = 3
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = fe02h - b7004100h
Class = Multimedia (Audio)
Vendor ID = 1274h, Ensoniq
Device ID = 1371h, ES1371 AudioPCI
PCI index = 0h
Class Codes = 040100h
Revision ID = 8h
Bus number = 2
Device number = 11
Function num = 0
Status Reg = 410h
Command Reg = 105h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = df00h length 64 enabled
Subsystem Vendor ID = 1274h
Subsystem ID = 1371h
Max Lat = 128ns
Min Gnt = 12ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 421h - 3h
