QNX 6 doesn't see ISA or PCi modem, Please Help

I installed QNX v6 and so far I really like it. Unfortunately, I cannot
fully explore QNX because I an unable to get either one of two modems to
work with it :frowning: I have an ISA slotted USR 56K PnP Voice FAX modem. It is
not a “winmodem”. After many disappointing attempts to get it working, I
replaced the modem with another USR model, a PCI slotted 56K PnP modem (not
a winmodem either). QNX doesn’t seem to recognize the PCI slot modem either
:frowning: Anyone have any suggestions on how I can get a modem working with QNX?

Thanks

Hi Dale,

Have you checked out the QNX Knowledge Base?
I ran a search using the keyword ‘modem’. Here are two good enties that may help you
with both modem cards.

http://qdn.qnx.com/support/bok/solution.qnx?10252

http://qdn.qnx.com/support/bok/solution.qnx?10101

Regards,

Joe


Dale Frameli <dframeli@texas.net> wrote:

I installed QNX v6 and so far I really like it. Unfortunately, I cannot
fully explore QNX because I an unable to get either one of two modems to
work with it > :frowning: > I have an ISA slotted USR 56K PnP Voice FAX modem. It is
not a “winmodem”. After many disappointing attempts to get it working, I
replaced the modem with another USR model, a PCI slotted 56K PnP modem (not
a winmodem either). QNX doesn’t seem to recognize the PCI slot modem either
:frowning: > Anyone have any suggestions on how I can get a modem working with QNX?

Thanks

Joe, Hello!

I checked the links you provided. I tried the BIOS trick some time back.
In fact, my BIOS is still set to a non-PnP OS.

I tried the suggestions listed in the second FAQ already as well. I found
that in a QNX oriented websites FAQ section. Sorry, I don’t remember the
website address. I printed out the instructions and tried it, but never had
any luck :frowning:

Thanks



“Hardware Support Account” <hw@qnx.com> wrote in message
news:9h7b9c$8mk$1@nntp.qnx.com

Hi Dale,

Have you checked out the QNX Knowledge Base?
I ran a search using the keyword ‘modem’. Here are two good enties that
may help you
with both modem cards.

http://qdn.qnx.com/support/bok/solution.qnx?10252

http://qdn.qnx.com/support/bok/solution.qnx?10101

Regards,

Joe


Dale Frameli <> dframeli@texas.net> > wrote:
I installed QNX v6 and so far I really like it. Unfortunately, I cannot
fully explore QNX because I an unable to get either one of two modems to
work with it > :frowning: > I have an ISA slotted USR 56K PnP Voice FAX modem. It
is
not a “winmodem”. After many disappointing attempts to get it working,
I
replaced the modem with another USR model, a PCI slotted 56K PnP modem
(not
a winmodem either). QNX doesn’t seem to recognize the PCI slot modem
either
:frowning: > Anyone have any suggestions on how I can get a modem working with
QNX?

Thanks

Joe, Hello!

I finally got my modem problem straightened out by replacing the modem
with a new one. The USR FaxModem PCI, model 5610A, works fine.

Thanks


“Dale Frameli” <dframeli@texas.net> wrote in message
news:9ha5om$7ml$1@inn.qnx.com

Joe, Hello!

I checked the links you provided. I tried the BIOS trick some time
back.
In fact, my BIOS is still set to a non-PnP OS.

I tried the suggestions listed in the second FAQ already as well. I
found
that in a QNX oriented websites FAQ section. Sorry, I don’t remember the
website address. I printed out the instructions and tried it, but never
had
any luck > :frowning:

Thanks



“Hardware Support Account” <> hw@qnx.com> > wrote in message
news:9h7b9c$8mk$> 1@nntp.qnx.com> …
Hi Dale,

Have you checked out the QNX Knowledge Base?
I ran a search using the keyword ‘modem’. Here are two good enties that
may help you
with both modem cards.

http://qdn.qnx.com/support/bok/solution.qnx?10252

http://qdn.qnx.com/support/bok/solution.qnx?10101

Regards,

Joe


Dale Frameli <> dframeli@texas.net> > wrote:
I installed QNX v6 and so far I really like it. Unfortunately, I
cannot
fully explore QNX because I an unable to get either one of two modems
to
work with it > :frowning: > I have an ISA slotted USR 56K PnP Voice FAX modem.
It
is
not a “winmodem”. After many disappointing attempts to get it
working,
I
replaced the modem with another USR model, a PCI slotted 56K PnP modem
(not
a winmodem either). QNX doesn’t seem to recognize the PCI slot modem
either
:frowning: > Anyone have any suggestions on how I can get a modem working with
QNX?

Thanks
\