I am trying to setup PPPoe on QNX and have run into the following problem.
The PPPD starts fine and connects to the server but then I receive the
following error.
LCP: timeout sending Config-Requests
Any thougths.
TIA.
Sean
Try grabbing the new version of pppd available on developers.qnx.com (under
fixes). This version fixes an authentication bug (as well as others).
–
Cheers,
Adam
QNX Software Systems Ltd.
[ amallory@qnx.com ]
With a PC, I always felt limited by the software available.
On Unix, I am limited only by my knowledge.
–Peter J. Schoenster <pschon@baste.magibox.net>
“Sean Slater” <seanslater@earthlink.net> wrote in message
news:a2qcn3$iv1$1@inn.qnx.com…
I am trying to setup PPPoe on QNX and have run into the following problem.
The PPPD starts fine and connects to the server but then I receive the
following error.LCP: timeout sending Config-Requests
Any thougths.
TIA.
Sean
Well I upgraded the pppd as suggested but still don’t connect. I have
verified my user name and password and they are fine. Is there any way to
capture the negotiation ? or is there some other setting that I should look
at ?
Negotiating PPPOE connection
:pppoed Started
: Contacting Sever
PPPoE session established
PPPOED session established
Negotiating PPP connection
pppd Started
Connection Terminated
PPPoE Connection closed
PPPOED connection closed
“Adam Mallory” <amallory@qnx.com> wrote in message
news:a2rlr0$rv4$1@nntp.qnx.com…
Try grabbing the new version of pppd available on developers.qnx.com
(under
fixes). This version fixes an authentication bug (as well as others).–
Cheers,
AdamQNX Software Systems Ltd.
[ > amallory@qnx.com > ]With a PC, I always felt limited by the software available.
On Unix, I am limited only by my knowledge.
–Peter J. Schoenster <> pschon@baste.magibox.net
“Sean Slater” <> seanslater@earthlink.net> > wrote in message
news:a2qcn3$iv1$> 1@inn.qnx.com> …
I am trying to setup PPPoe on QNX and have run into the following
problem.
The PPPD starts fine and connects to the server but then I receive the
following error.LCP: timeout sending Config-Requests
Any thougths.
TIA.
Sean
\
You can enable pop up the terminal window in the dialer. Or make sure
you’re running syslogd, and check the system logs for more information.
–
Cheers,
Adam
QNX Software Systems Ltd.
[ amallory@qnx.com ]
With a PC, I always felt limited by the software available.
On Unix, I am limited only by my knowledge.
–Peter J. Schoenster <pschon@baste.magibox.net>
“Sean Slater” <seanslater@earthlink.net> wrote in message
news:a2so1j$arp$1@inn.qnx.com…
Well I upgraded the pppd as suggested but still don’t connect. I have
verified my user name and password and they are fine. Is there any way to
capture the negotiation ? or is there some other setting that I should
look
at ?Negotiating PPPOE connection
:pppoed Started
: Contacting Sever
PPPoE session established
PPPOED session established
Negotiating PPP connection
pppd Started
Connection Terminated
PPPoE Connection closed
PPPOED connection closed
“Adam Mallory” <> amallory@qnx.com> > wrote in message
news:a2rlr0$rv4$> 1@nntp.qnx.com> …Try grabbing the new version of pppd available on developers.qnx.com
(under
fixes). This version fixes an authentication bug (as well as others).–
Cheers,
AdamQNX Software Systems Ltd.
[ > amallory@qnx.com > ]With a PC, I always felt limited by the software available.
On Unix, I am limited only by my knowledge.
–Peter J. Schoenster <> pschon@baste.magibox.net
“Sean Slater” <> seanslater@earthlink.net> > wrote in message
news:a2qcn3$iv1$> 1@inn.qnx.com> …
I am trying to setup PPPoe on QNX and have run into the following
problem.
The PPPD starts fine and connects to the server but then I receive the
following error.LCP: timeout sending Config-Requests
Any thougths.
TIA.
Sean
\