Hello,
I installed QNX RTP on a machine which had Windows 95 installed on it.
It has a 3Com 509 Etherlink III Ethernet Card. When I boot from RTP,
everything is working fine. But, I am unable to configure my machine for
the network. When I try to ping, I always get a message - No route to
host!
Can anybody let me know what configuration files have to be setup, what
drivers have to be started and what commands have to executed to get my
machine on the network. I also want to connect to the web through
Voyager. Please help me out.
Thanks in anticipation
Zhivago…
Narayanan UM <umn@ieee.org> wrote:
Hello,
I installed QNX RTP on a machine which had Windows 95 installed on it.
It has a 3Com 509 Etherlink III Ethernet Card. When I boot from RTP,
everything is working fine. But, I am unable to configure my machine for
the network. When I try to ping, I always get a message - No route to
host!
If you run phlip under photon you will get a nice networking config
application. I think you can reach it from the Launch menu too!
chris
–
cdm@qnx.com > “The faster I go, the behinder I get.”
Chris McKillop – Lewis Carroll –
Software Engineer, QSSL
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<