Setup of M Systems flash disk

Hi,

I have an ICP 5820 industrial board using a Cyrix 233 MHz chip. This takes a
M Systems DiskOnChip Flash memory Chip. Without any special software I can
accessc this as the C drive under DOS 6.22. Any ideas how I can access this
under QNX RtP?

Thanks for your help

FRANS <H.F.Weehuizen@massey.ac.nz> wrote:

Hi,

I have an ICP 5820 industrial board using a Cyrix 233 MHz chip. This takes a
M Systems DiskOnChip Flash memory Chip. Without any special software I can
accessc this as the C drive under DOS 6.22. Any ideas how I can access this
under QNX RtP?

M Systems is developing a driver for their DOC chips, the same
way they did for QNX 4.2x. Last I heard, it was in beta, but
they weren’t making it publicly available. Contact them for
further details on the status of things.


I hope this helps.


Norbert Black
QSSL Training Services

I recall there is DOC driver in the patch A.
At least it was in one of intermediate versions of it :wink:

-igor

“Norbert Black” <nblack@qnx.com> wrote in message
news:93lh2p$394$3@nntp.qnx.com

FRANS <> H.F.Weehuizen@massey.ac.nz> > wrote:
Hi,

I have an ICP 5820 industrial board using a Cyrix 233 MHz chip. This
takes a
M Systems DiskOnChip Flash memory Chip. Without any special software I
can
accessc this as the C drive under DOS 6.22. Any ideas how I can access
this
under QNX RtP?

M Systems is developing a driver for their DOC chips, the same
way they did for QNX 4.2x. Last I heard, it was in beta, but
they weren’t making it publicly available. Contact them for
further details on the status of things.


I hope this helps.


Norbert Black
QSSL Training Services

M-Systems makes the drivers and we are putting them into our
releases of the RTP. There should be one in Patch A when it
comes publicly available.


Erick.



Igor Kovalenko <kovalenko@home.com> wrote:

I recall there is DOC driver in the patch A.
At least it was in one of intermediate versions of it > :wink:

-igor

“Norbert Black” <> nblack@qnx.com> > wrote in message
news:93lh2p$394$> 3@nntp.qnx.com> …
FRANS <> H.F.Weehuizen@massey.ac.nz> > wrote:
Hi,

I have an ICP 5820 industrial board using a Cyrix 233 MHz chip. This
takes a
M Systems DiskOnChip Flash memory Chip. Without any special software I
can
accessc this as the C drive under DOS 6.22. Any ideas how I can access
this
under QNX RtP?

M Systems is developing a driver for their DOC chips, the same
way they did for QNX 4.2x. Last I heard, it was in beta, but
they weren’t making it publicly available. Contact them for
further details on the status of things.


I hope this helps.


Norbert Black
QSSL Training Services