Hi there…
updated today the QNXRTP - now hangs the Toshiba CS100…
starting in w95,
‘Press space bar to input boot options…’
pci-bios: No BIOS present - Status ffffffff - errno 0!
pci_server: No dll loaded!
/dev/pci did not mount
_
…game over…
Tosh hangs, just cursor is blinking.
Hm, possible due: The cs100 is without ‘PCI’-BIOS
The former version was booting, unfortunately I don’t have this version any
longer (lack of space).
I tried the boot options, too. Always the same result.
Anyone here with a solution, sugestion, please??
Maybe anywhere the former version archived to dl?
Thanks,
Michael
Hi Michael,
I have the same issue on my 486 laptop, I am in the process of trying to
change the setup. I belive that the issue stems down to startup scripts
that assume that /dev/pci is present. I will try and keep you
posted on the status of this.
Michael Droth <midroth.com@attglobal.net> wrote:
Hi there…
updated today the QNXRTP - now hangs the Toshiba CS100…
starting in w95,
‘Press space bar to input boot options…’
pci-bios: No BIOS present - Status ffffffff - errno 0!
pci_server: No dll loaded!
/dev/pci did not mount
_
…game over…
Tosh hangs, just cursor is blinking.
Hm, possible due: The cs100 is without ‘PCI’-BIOS >
The former version was booting, unfortunately I don’t have this version any
longer (lack of space).
I tried the boot options, too. Always the same result.
Anyone here with a solution, sugestion, please??
Maybe anywhere the former version archived to dl?
Thanks,
Michael
I also have a 486 same problem. How do you change the setup, when my
notebook hangs and I can’t change anything?
Do I press space bar to change input boot options?
Ruben
Hi Michael,
I have the same issue on my 486 laptop, I am in the process of trying to
change the setup. I belive that the issue stems down to startup scripts
that assume that /dev/pci is present. I will try and keep you
posted on the status of this.
Michael Droth <> midroth.com@attglobal.net> > wrote:
Hi there…
updated today the QNXRTP - now hangs the Toshiba CS100…
starting in w95,
‘Press space bar to input boot options…’
pci-bios: No BIOS present - Status ffffffff - errno 0!
pci_server: No dll loaded!
/dev/pci did not mount
_
…game over…
Tosh hangs, just cursor is blinking.
Hm, possible due: The cs100 is without ‘PCI’-BIOS >
The former version was booting, unfortunately I don’t have this version
any
longer (lack of space).
I tried the boot options, too. Always the same result.
Anyone here with a solution, sugestion, please??
Maybe anywhere the former version archived to dl?
Thanks,
Michael
I used the space bar to change input boot options and I selected F6 for
“Verbose”. I works until it get to the point where it starts the pci-bios.
Then I get the message:
“Unable to allocate resource: Resource temporarily unavailable”
“pci_server: PCI_Startup fail!”
“/dev/pci did not mount”
Ruben.
I also have a 486 same problem. How do you change the setup, when my
notebook hangs and I can’t change anything?
Do I press space bar to change input boot options?
Ruben
Hi Michael,
I have the same issue on my 486 laptop, I am in the process of trying to
change the setup. I belive that the issue stems down to startup scripts
that assume that /dev/pci is present. I will try and keep you
posted on the status of this.
Michael Droth <> midroth.com@attglobal.net> > wrote:
Hi there…
updated today the QNXRTP - now hangs the Toshiba CS100…
starting in w95,
‘Press space bar to input boot options…’
pci-bios: No BIOS present - Status ffffffff - errno 0!
pci_server: No dll loaded!
/dev/pci did not mount
_
…game over…
Tosh hangs, just cursor is blinking.
Hm, possible due: The cs100 is without ‘PCI’-BIOS >
The former version was booting, unfortunately I don’t have this
version
any
longer (lack of space).
I tried the boot options, too. Always the same result.
Anyone here with a solution, sugestion, please??
Maybe anywhere the former version archived to dl?
Thanks,
Michael
\