Hi there!
I have installed QNX RTP v6.0 couple of days ago and using the qnxrtp.exe
selfextraction and i’ve found out that my network interfaxce card is not
supported,so i can’t download the development tools and ather packages!
So,i have downloaded the qnxrtp.iso image,then i’ve burned a cd,and when i
opened it through the FileManager in QNX,I 've seen that on the CD i have
the same qnxrtp.iso file,which i think is not what is supposed to be on the
disk.
I’ve tried opening it from the package manager from CD-repository,but I’ve
received an error message stating :
" unable to find the file /fs/cd0/repository2"
My question is what kind of CD-ROM burning program i have to use,so it can
burn the proper files on the CD.Or if the .iso image is sopposed to be used
as it is,how can i use it then?
10x in advanse
Svetoslav
The iso file is an image of the CD and not a file to be burn
on the CD. Most buring program "Adaptec, Nero, CDRwin,
fireburner all have option to burn images and they should
understand what an .iso file is.
“Svetoslav Vasilev” <svetoslav@cadarc.com> wrote in message
news:99f02h$g2a$1@inn.qnx.com…
Hi there!
I have installed QNX RTP v6.0 couple of days ago and using the qnxrtp.exe
selfextraction and i’ve found out that my network interfaxce card is not
supported,so i can’t download the development tools and ather packages!
So,i have downloaded the qnxrtp.iso image,then i’ve burned a cd,and when i
opened it through the FileManager in QNX,I 've seen that on the CD i have
the same qnxrtp.iso file,which i think is not what is supposed to be on
the
disk.
I’ve tried opening it from the package manager from CD-repository,but
I’ve
received an error message stating :
" unable to find the file /fs/cd0/repository2"
My question is what kind of CD-ROM burning program i have to use,so it
can
burn the proper files on the CD.Or if the .iso image is sopposed to be
used
as it is,how can i use it then?
10x in advanse
Svetoslav
On Fri, 23 Mar 2001 14:04:43 +0100, “Svetoslav Vasilev”
<svetoslav@cadarc.com> wrote:
Hi there!
I have installed QNX RTP v6.0 couple of days ago and using the qnxrtp.exe
selfextraction and i’ve found out that my network interfaxce card is not
supported,so i can’t download the development tools and ather packages!
So,i have downloaded the qnxrtp.iso image,then i’ve burned a cd,and when i
opened it through the FileManager in QNX,I 've seen that on the CD i have
the same qnxrtp.iso file,which i think is not what is supposed to be on the
disk.
I’ve tried opening it from the package manager from CD-repository,but I’ve
received an error message stating :
" unable to find the file /fs/cd0/repository2"
My question is what kind of CD-ROM burning program i have to use,so it can
burn the proper files on the CD.Or if the .iso image is sopposed to be used
as it is,how can i use it then?
10x in advanse
Svetoslav
You have probably burnt the .iso file like
an ordinary file. Any CD burning program should have
a separate option to burn CD image (.iso) files.
Under Win… it is sometimes as simple as
double-clicking the name of the .iso file…
After burning qnxrtp.iso you should have
a self-booting CD (or at least you should see
many catalogues and files on it).
Andrzej Kocon
Svetoslav Vasilev <svetoslav@cadarc.com> wrote:
: Hi there!
: I have installed QNX RTP v6.0 couple of days ago and using the qnxrtp.exe
: selfextraction and i’ve found out that my network interfaxce card is not
: supported,so i can’t download the development tools and ather packages!
: So,i have downloaded the qnxrtp.iso image,then i’ve burned a cd,and when i
: opened it through the FileManager in QNX,I 've seen that on the CD i have
: the same qnxrtp.iso file,which i think is not what is supposed to be on the
: disk.
: I’ve tried opening it from the package manager from CD-repository,but I’ve
: received an error message stating :
: " unable to find the file /fs/cd0/repository2"
: My question is what kind of CD-ROM burning program i have to use,so it can
: burn the proper files on the CD.Or if the .iso image is sopposed to be used
: as it is,how can i use it then?
: 10x in advanse
: Svetoslav
If you mount the file on you current cd, you could point a repository
at it. I’ve done this in the past, but can’t find my steps right now
mount -t cd /fs/cd0/.iso /fs/cd1
Then if you add an item in the package installer that looks
at /fs/cd1/repository2, you should be able to install with
what you have.
Peter
I think that you can try the FireBurner program to burn *.iso file
“Svetoslav Vasilev” <svetoslav@cadarc.com> wrote in message
news:99f02h$g2a$1@inn.qnx.com…
Hi there!
I have installed QNX RTP v6.0 couple of days ago and using the qnxrtp.exe
selfextraction and i’ve found out that my network interfaxce card is not
supported,so i can’t download the development tools and ather packages!
So,i have downloaded the qnxrtp.iso image,then i’ve burned a cd,and when i
opened it through the FileManager in QNX,I 've seen that on the CD i have
the same qnxrtp.iso file,which i think is not what is supposed to be on
the
disk.
I’ve tried opening it from the package manager from CD-repository,but
I’ve
received an error message stating :
" unable to find the file /fs/cd0/repository2"
My question is what kind of CD-ROM burning program i have to use,so it
can
burn the proper files on the CD.Or if the .iso image is sopposed to be
used
as it is,how can i use it then?
10x in advanse
Svetoslav
“Peter Martin” <peterm@qnx.com> wrote in message
news:99gfno$6u9$1@nntp.qnx.com…
Svetoslav Vasilev <> svetoslav@cadarc.com> > wrote:
: Hi there!
: I have installed QNX RTP v6.0 couple of days ago and using the
qnxrtp.exe
: selfextraction and i’ve found out that my network interfaxce card is not
: supported,so i can’t download the development tools and ather packages!
: So,i have downloaded the qnxrtp.iso image,then i’ve burned a cd,and when
i
: opened it through the FileManager in QNX,I 've seen that on the CD i
have
: the same qnxrtp.iso file,which i think is not what is supposed to be on
the
: disk.
: I’ve tried opening it from the package manager from CD-repository,but
I’ve
: received an error message stating :
: " unable to find the file /fs/cd0/repository2"
: My question is what kind of CD-ROM burning program i have to use,so it
can
: burn the proper files on the CD.Or if the .iso image is sopposed to be
used
: as it is,how can i use it then?
: 10x in advanse
: SvetoslavIf you mount the file on you current cd, you could point a repository
at it. I’ve done this in the past, but can’t find my steps right nowmount -t cd /fs/cd0/.iso /fs/cd1
Should I be able to do something like?
mount -t cd /mypath/qnxrpt.iso /fs/cd1
How can I make an .iso file on my hard drive look like a CD?
–
Bill Caroselli - Sattel Global Networks
1-818-709-6201 ext 122
Bill Caroselli <Bill@sattel.com> wrote:
: “Peter Martin” <peterm@qnx.com> wrote in message
: news:99gfno$6u9$1@nntp.qnx.com…
:> Svetoslav Vasilev <svetoslav@cadarc.com> wrote:
:> : Hi there!
:> : I have installed QNX RTP v6.0 couple of days ago and using the
: qnxrtp.exe
:> : selfextraction and i’ve found out that my network interfaxce card is not
:> : supported,so i can’t download the development tools and ather packages!
:> : So,i have downloaded the qnxrtp.iso image,then i’ve burned a cd,and when
: i
:> : opened it through the FileManager in QNX,I 've seen that on the CD i
: have
:> : the same qnxrtp.iso file,which i think is not what is supposed to be on
: the
:> : disk.
:> : I’ve tried opening it from the package manager from CD-repository,but
: I’ve
:> : received an error message stating :
:> : " unable to find the file /fs/cd0/repository2"
:> : My question is what kind of CD-ROM burning program i have to use,so it
: can
:> : burn the proper files on the CD.Or if the .iso image is sopposed to be
: used
:> : as it is,how can i use it then?
:> : 10x in advanse
:> : Svetoslav
:> If you mount the file on you current cd, you could point a repository
:> at it. I’ve done this in the past, but can’t find my steps right now
:>
:> mount -t cd /fs/cd0/.iso /fs/cd1
: Should I be able to do something like?
: mount -t cd /mypath/qnxrpt.iso /fs/cd1
: How can I make an .iso file on my hard drive look like a CD?
Those steps are what I do (as root)
Peter
: –
: Bill Caroselli - Sattel Global Networks
: 1-818-709-6201 ext 122
Hello Peter
I tried what you said here. After I have installed ‘Repository2’ (which gave
the illusion of working without errors) I double click on that repository I
get a pop-up window that says:
“Package Manager - The repository ‘Respoitory2’ contains files that have
errors.”
If I them click on “View Errors” it says:
"Error while parsing: ‘/root//.ph/pkg_mgr/repository/entry3/repository.qrm’
"
Clicking “OK” at this point simply shows that there is noting under this
repository.
Do I have a bad iso image? or am I doing something wrong?
All I want to do is to update an RTP system that doesn’t have a CD Rom drive
and that ‘currently’ I can’t use the network card (it’s a Sis 900 - rumor
has it that that driver is forthcoming). We have a nice high speed
connection to the internet but crappy phone service here so I don’t want to
try to use a modem.
–
Bill Caroselli - Sattel Global Networks
1-818-709-6201 ext 122
“Peter Martin” <peterm@qnx.com> wrote in message
news:99gfno$6u9$1@nntp.qnx.com…
Svetoslav Vasilev <> svetoslav@cadarc.com> > wrote:
: Hi there!
: I have installed QNX RTP v6.0 couple of days ago and using the
qnxrtp.exe
: selfextraction and i’ve found out that my network interfaxce card is not
: supported,so i can’t download the development tools and ather packages!
: So,i have downloaded the qnxrtp.iso image,then i’ve burned a cd,and when
i
: opened it through the FileManager in QNX,I 've seen that on the CD i
have
: the same qnxrtp.iso file,which i think is not what is supposed to be on
the
: disk.
: I’ve tried opening it from the package manager from CD-repository,but
I’ve
: received an error message stating :
: " unable to find the file /fs/cd0/repository2"
: My question is what kind of CD-ROM burning program i have to use,so it
can
: burn the proper files on the CD.Or if the .iso image is sopposed to be
used
: as it is,how can i use it then?
: 10x in advanse
: SvetoslavIf you mount the file on you current cd, you could point a repository
at it. I’ve done this in the past, but can’t find my steps right nowmount -t cd /fs/cd0/.iso /fs/cd1
Then if you add an item in the package installer that looks
at /fs/cd1/repository2, you should be able to install with
what you have.Peter
Any thoughts on this?
–
Bill Caroselli - Sattel Global Networks
1-818-709-6201 ext 122
“Bill Caroselli” <Bill@Sattel.com> wrote in message
news:9f3697$qlp$1@inn.qnx.com…
Hello Peter
I tried what you said here. After I have installed ‘Repository2’ (which
gave
the illusion of working without errors) I double click on that repository
I
get a pop-up window that says:“Package Manager - The repository ‘Respoitory2’ contains files that have
errors.”If I them click on “View Errors” it says:
"Error while parsing:
‘/root//.ph/pkg_mgr/repository/entry3/repository.qrm’
"Clicking “OK” at this point simply shows that there is noting under this
repository.Do I have a bad iso image? or am I doing something wrong?
All I want to do is to update an RTP system that doesn’t have a CD Rom
drive
and that ‘currently’ I can’t use the network card (it’s a Sis 900 - rumor
has it that that driver is forthcoming). We have a nice high speed
connection to the internet but crappy phone service here so I don’t want
to
try to use a modem.