QNX 6, Neither ISA nor PCI modems recognized, please help

QNX Newsgroups (Archives) qdn.public.qnxrtp.installation
1

I installed QNX v6 and so far I really like it. Unfortunately, I cannot
fully explore QNX because I an unable to get either one of two modems to
work with it :frowning: I have an ISA slotted USR 56K PnP Voice FAX modem. It is
not a “winmodem”. After many disappointing attempts to get it working, I
replaced the modem with another USR model, a PCI slotted 56K PnP modem (not
a winmodem either). QNX doesn’t seem to recognize the PCI slot modem either
:frowning: Anyone have any suggestions on how I can get a modem working with QNX?

Thanks

2

Hi Dale,

Please don’t cross post (it makes a mess of the newsgroup).

Goto the QNX Knowledge Base and run a search on QNX RTP using the keyword ‘Modem’.
You should find what you need.

Regards,

Joe

Dale Frameli <dframeli@texas.net> wrote:

I installed QNX v6 and so far I really like it. Unfortunately, I cannot
fully explore QNX because I an unable to get either one of two modems to
work with it > :frowning: > I have an ISA slotted USR 56K PnP Voice FAX modem. It is
not a “winmodem”. After many disappointing attempts to get it working, I
replaced the modem with another USR model, a PCI slotted 56K PnP modem (not
a winmodem either). QNX doesn’t seem to recognize the PCI slot modem either
:frowning: > Anyone have any suggestions on how I can get a modem working with QNX?

Thanks

3

Joe,

Thanks for the suggestion. I went to the knowledge base however, and none
of what I found corrected the problem for me :frowning: These are “standard” 56k
modems manufacturered by a major company, USRobotics. They aren’t
winmodems. I don’t understand why the OS wouldn’t recognize them. :frowning:

Thanks Again
Dale


“Hardware Support Account” <hw@qnx.com> wrote in message
news:9h807m$kja$3@nntp.qnx.com…

Hi Dale,

Please don’t cross post (it makes a mess of the newsgroup).

Goto the QNX Knowledge Base and run a search on QNX RTP using the keyword
‘Modem’.
You should find what you need.

Regards,

Joe

Dale Frameli <> dframeli@texas.net> > wrote:
I installed QNX v6 and so far I really like it. Unfortunately, I cannot
fully explore QNX because I an unable to get either one of two modems to
work with it > :frowning: > I have an ISA slotted USR 56K PnP Voice FAX modem. It
is
not a “winmodem”. After many disappointing attempts to get it working,
I
replaced the modem with another USR model, a PCI slotted 56K PnP modem
(not
a winmodem either). QNX doesn’t seem to recognize the PCI slot modem
either
:frowning: > Anyone have any suggestions on how I can get a modem working with
QNX?

Thanks