VGA chips

QNX Newsgroups (Archives) qdn.public.qnxrtp.installation
1

Hi,
I have to choose an PICMG format SBC card with two processors (to
install under QNX 6.1).

I have two questions about VGA chips :

First : Can I configure an ATI mobility M1 AGP with an ATI driver
released with QNX 6.1 (devg-rage or other)?

Second : I understand in www.qnx.com that there is a patch for the SiS
6326 chip under QNX 4.24 but there is no support of that chip under
QNX6.1. Is it exact ? and can i use the 4.24 patch under QNX6.1?

Thank for your responses

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire TIMC/IMAG/CNRS Domaine de la Merci
Tel: +33 (0)4 76 54 95 31 38706 La Tronche Cedex (FRANCE)

2

Johan CARDON <johan.cardon@imag.fr> wrote:

Hi,
I have to choose an PICMG format SBC card with two processors (to
install under QNX 6.1).

I have two questions about VGA chips :

First : Can I configure an ATI mobility M1 AGP with an ATI driver
released with QNX 6.1 (devg-rage or other)?

Yes, the ATI Mobiility M1 should work with devg-rage.

Second : I understand in > www.qnx.com > that there is a patch for the SiS
6326 chip under QNX 4.24 but there is no support of that chip under
QNX6.1. Is it exact ? and can i use the 4.24 patch under QNX6.1?

There is currently no accelerated driver for the SiS 6326 under QNX6.1.
However, it should work with one of the generic drivers.
You cannot use the 4.24 patch under 6.1.

Take care.

Erick.


Thank for your responses

Institut Albert Bonniot
Johan CARDON Facult? de Medecine de Grenoble
Laboratoire TIMC/IMAG/CNRS Domaine de la Merci
Tel: +33 (0)4 76 54 95 31 38706 La Tronche Cedex (FRANCE)