TI-44551 PCCard Interface

Hello.

Living at the forefront of Notebook technology has its price.

I have a Dell Inspiron 8100 notebook that I have installed RTP onto. All
works very well,
(except for native video, GeForce2Go( I know no info yet), flat works fine).

Windows DeviceManager reports that the PCCardbus interface is a TI-4451
CardBus controller. Under RTP, “devp-pccard -vvv &” does not print anything
and quickly exits.

here is my pci -vvv file.

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac42h, PCI4451 PC card CardBus Controller
PCI index = 0h
Class Codes = 060700h
Revision ID = 0h
Bus number = 2
Device number = 15
Function num = 0
Status Reg = 210h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
ExCA Base Address = f2000000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 4
Subordinate Bus Number = 4
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 10
Bridge Control = 7c0h
Subsystem Vendor ID = 1028h
Subsystem ID = e6h
Legacy Mode Base Address = 3e0h
System Control = 3024d020h
Retry Status = c0h
Card Control = 83h
Device Control = 64h
Buffer Control = 60h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h
Device Dependent Registers:
0x40: 28 10 e6 00 e1 03 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 20 d0 24 30 00 06 00 00 01 00 0f 00 02 30 03 05
0x90: c0 83 64 60 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 01 00 12 fe 00 00 c0 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac42h, PCI4451 PC card CardBus Controller
PCI index = 1h
Class Codes = 060700h
Revision ID = 0h
Bus number = 2
Device number = 15
Function num = 1
Status Reg = 210h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
ExCA Base Address = f2001000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 5
Subordinate Bus Number = 5
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 10
Bridge Control = 7c0h
Subsystem Vendor ID = 1028h
Subsystem ID = e6h
Legacy Mode Base Address = 3e0h
System Control = 3024d020h
Retry Status = c0h
Card Control = 82h
Device Control = 64h
Buffer Control = 60h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h
Device Dependent Registers:
0x40: 28 10 e6 00 e1 03 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 20 d0 24 30 00 06 00 00 01 00 0f 00 02 30 03 05
0x90: c0 82 64 60 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 01 00 12 fe 00 00 c0 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

I will check to see if it works under QNX4 (also installed on machine.
Thanks
Kevin Hammond
PACE Control Systems

Replied via e-mail.

Previously, Kevin Hammond wrote in qdn.public.qnxrtp.installation:

Hello.

Living at the forefront of Notebook technology has its price.

I have a Dell Inspiron 8100 notebook that I have installed RTP onto. All
works very well,
(except for native video, GeForce2Go( I know no info yet), flat works fine).

Windows DeviceManager reports that the PCCardbus interface is a TI-4451
CardBus controller. Under RTP, “devp-pccard -vvv &” does not print anything
and quickly exits.

here is my pci -vvv file.

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac42h, PCI4451 PC card CardBus Controller
PCI index = 0h
Class Codes = 060700h
Revision ID = 0h
Bus number = 2
Device number = 15
Function num = 0
Status Reg = 210h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
ExCA Base Address = f2000000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 4
Subordinate Bus Number = 4
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 10
Bridge Control = 7c0h
Subsystem Vendor ID = 1028h
Subsystem ID = e6h
Legacy Mode Base Address = 3e0h
System Control = 3024d020h
Retry Status = c0h
Card Control = 83h
Device Control = 64h
Buffer Control = 60h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h
Device Dependent Registers:
0x40: 28 10 e6 00 e1 03 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 20 d0 24 30 00 06 00 00 01 00 0f 00 02 30 03 05
0x90: c0 83 64 60 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 01 00 12 fe 00 00 c0 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac42h, PCI4451 PC card CardBus Controller
PCI index = 1h
Class Codes = 060700h
Revision ID = 0h
Bus number = 2
Device number = 15
Function num = 1
Status Reg = 210h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
ExCA Base Address = f2001000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 5
Subordinate Bus Number = 5
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 10
Bridge Control = 7c0h
Subsystem Vendor ID = 1028h
Subsystem ID = e6h
Legacy Mode Base Address = 3e0h
System Control = 3024d020h
Retry Status = c0h
Card Control = 82h
Device Control = 64h
Buffer Control = 60h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h
Device Dependent Registers:
0x40: 28 10 e6 00 e1 03 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 20 d0 24 30 00 06 00 00 01 00 0f 00 02 30 03 05
0x90: c0 82 64 60 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 01 00 12 fe 00 00 c0 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

I will check to see if it works under QNX4 (also installed on machine.
Thanks
Kevin Hammond
PACE Control Systems