I’have problem to install Qnx on a NT machine.
When i boot the cd iso it goes through the eide detect sequence then
says : unable to mount a dos filesystem /fs/hd0/ on /dev/hd0t6.1 ( corrupted
file system detected )
So it’s possible to make the only windows installation.
AMD 1.2ghz
LG 52x cdr
20gb hard drive
radeon 7200 vid card
any help would be appreciated
thanks
Andrea
Hello Andea,
What do you have connected as …
Primary master
Primary slave
Secondary master
Secondary slave
Also, what CD are you booting from? Do you only have NT installed on
your system now? And is your NT partition NTFS?
Regards,
Dave B.
Andea wrote:
I’have problem to install Qnx on a NT machine.
When i boot the cd iso it goes through the eide detect sequence then
says : unable to mount a dos filesystem /fs/hd0/ on /dev/hd0t6.1 ( corrupted
file system detected )
So it’s possible to make the only windows installation.
AMD 1.2ghz
LG 52x cdr
20gb hard drive
radeon 7200 vid cardany help would be appreciated
thanks
Andrea
\
Make your CDROM drive seconday slave.
“Andea” <a.lombardi@genesy.it> wrote in message
news:a3rmj3$qpt$1@inn.qnx.com…
I’have problem to install Qnx on a NT machine.
When i boot the cd iso it goes through the eide detect sequence then
says : unable to mount a dos filesystem /fs/hd0/ on /dev/hd0t6.1 (
corrupted
file system detected )
So it’s possible to make the only windows installation.
AMD 1.2ghz
LG 52x cdr
20gb hard drive
radeon 7200 vid cardany help would be appreciated
thanks
Andrea
Oops, I meant primary slave.
“Steve Cornett” <news@bullseye.com> wrote in message
news:a41jkj$bup$1@inn.qnx.com…
Make your CDROM drive seconday slave.
“Andea” <> a.lombardi@genesy.it> > wrote in message
news:a3rmj3$qpt$> 1@inn.qnx.com> …
I’have problem to install Qnx on a NT machine.
When i boot the cd iso it goes through the eide detect sequence then
says : unable to mount a dos filesystem /fs/hd0/ on /dev/hd0t6.1 (
corrupted
file system detected )
So it’s possible to make the only windows installation.
AMD 1.2ghz
LG 52x cdr
20gb hard drive
radeon 7200 vid cardany help would be appreciated
thanks
Andrea
\
Hello,
these are the information you need.
I have a cd QNX 6.1, my OS is window NT and i have 1 FAT, 1NTFS and an empty
pertition where in install QNX
So i start installing booting directly from cdrom.
Best regards,
Andrea
Hi Andrea,
Delete an empty partition in order to get free unpartitioned space. I think you’ll have to resize
the extended partition in order to get this free space outside the extended partition, use
Partition Magic. I sent you an email with additional info.
Best regards,
Eduard.
Andea <a.lombardi@genesy.it> wrote in article <a4gnfh$bdk$1@inn.qnx.com>…
Hello,
these are the information you need.
I have a cd QNX 6.1, my OS is window NT and i have 1 FAT, 1NTFS and an empty
pertition where in install QNX
So i start installing booting directly from cdrom.Best regards,
Andrea
\