Adaptec ATA RAID 2400A Controller

Anyone attempted to use one of these with QNX? I installed the hardware,
mirrored the original QNX drive to a second drive on the array, disabled the
primary IDE controller in the BIOS and booted the system. QNX’s boot loader
is found, but it cannot find the IDE Controller. I boot from CD (using QNX
6.1.0) and run a “pci -v” from a terminal window. QNX lists this device as
an intelligent I/O device, not a mass storage device.

Any ideas?


Randy Aeberhardt
<raeberhardt@tantalus-systems.com>
<www.tantalus-systems.com>