PCI Modem card for QRTP & QNX 4.2x?

The newsgroups have been busy and I may have missed this question being
asked before.

I don’t see the hardware list of supported PCI modems for QRTP.
http://qdn.qnx.com/support/hardware/platform/ doesn’t list modems.

Is there a PCI modem that is supported by QRTP and QNX 4.2x?

KenR

Ken Recchia <rectech@nctimes.net> wrote:

The newsgroups have been busy and I may have missed this question being
asked before.

I don’t see the hardware list of supported PCI modems for QRTP.
http://qdn.qnx.com/support/hardware/platform/ > doesn’t list modems.

Let’s start one…
Required information:

Manufacturer: 3COM U.S. Robotics
Name: 56K Faxmodem PCI Model No. 5610

Notes: Internal modem AND/OR anything you had to do to get it to work

output from pidin ar | grep ser:
110602 devc-ser8250 -u1 3f8,4 -u2 2f8,3 -u3 a8000,10

output from pci -v for the modem:
Class = Communication (Serial Controller)
Vendor ID = 12b9h, US Robotics
Device ID = 1008h, Unknown Unknown
PCI index = 0h
Class Codes = 070002h
Revision ID = 1h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 210h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
IO Address = a800h length 8 enabled
Subsystem Vendor ID = 12b9h
Subsystem ID = adh
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = ec02h - a0004000h

After I get a couple ISA and PCI modems listed I will list them at
http://support.qnx.com/support/hardware/platform/index.html
in their very own category. :slight_smile:

TIA,
Chris

Is there a PCI modem that is supported by QRTP and QNX 4.2x?

KenR

anyone?

Chris Travis <ctravis@qnx.com> wrote:

Ken Recchia <> rectech@nctimes.net> > wrote:
The newsgroups have been busy and I may have missed this question being
asked before.

I don’t see the hardware list of supported PCI modems for QRTP.
http://qdn.qnx.com/support/hardware/platform/ > doesn’t list modems.

Let’s start one…
Required information:

Manufacturer: 3COM U.S. Robotics
Name: 56K Faxmodem PCI Model No. 5610

Notes: Internal modem AND/OR anything you had to do to get it to work

output from pidin ar | grep ser:
110602 devc-ser8250 -u1 3f8,4 -u2 2f8,3 -u3 a8000,10

output from pci -v for the modem:
Class = Communication (Serial Controller)
Vendor ID = 12b9h, US Robotics
Device ID = 1008h, Unknown Unknown
PCI index = 0h
Class Codes = 070002h
Revision ID = 1h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 210h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
IO Address = a800h length 8 enabled
Subsystem Vendor ID = 12b9h
Subsystem ID = adh
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = ec02h - a0004000h

After I get a couple ISA and PCI modems listed I will list them at
http://support.qnx.com/support/hardware/platform/index.html
in their very own category. > :slight_smile:

TIA,
Chris
Is there a PCI modem that is supported by QRTP and QNX 4.2x?

KenR