i have a linksys card that is not detected by nettrap… can anyone
help?
vince
Vince…
Look in the qdn.public.qnxrtp.newuser news groop.
I have a linksys 10/100 NIC (it’s PCI) in my computer. When I do a pci
-v, it lists that I have it and recognizes that it is an ethernet
adapter, but when I do an io-net -d tulip it tells me no device found.
I used tulip because that is the linux module that is used for this
network card, so I figured it would be the same. I decided to try and
run an io-net -d ne2000. This simply returned me to a prompt with no
error or success messages. Is this card supported? Am I on the right
track to getting my network going? Please help!
-Steve
From a previous post by cdm:Go to > http://staff.qnx.com/~cdm/networking/ > and nab the current
UNOFFICAL tulip driver. Once you are booted do this (as root)…mount -Tio-net devn-tulip.so
And you will get the ethernet config tab in Networking Config. You can
add that line in a file called /etc/rc.d/rc.local. Don’t forget to
“chmod 755 /etc/rc.d/rc.local” before you reboot! >
smeg head wrote:
i have a linksys card that is not detected by nettrap… can anyone
help?vince