Hi Joe & Hardware support …
I followed this series, and I am experiencing similar problems. Any
resolution to this problem that may be made public?
Regards…
Miguel.
Hardware Support Account wrote:
Hi Jim,
I sent you an email.
Regards,
Joe
Jim Moore <> jmoore@agvp.com> > wrote:
Joe,
Here is the dump as requested…
Time Sev Major Minor Args
Jan 01 00:01:03 5 18 0 GetStatus Socket 0 returned CardState b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:03 5 18 0 GetSocket Socket 0 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 0 -
VccLevel 0 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Jan 01 00:01:03 5 18 0 Socket state b0
Jan 01 00:01:03 5 18 0 Card Inserted
Jan 01 00:01:03 5 18 0 5.0V Card
Jan 01 00:01:04 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:04 5 18 0 Powered up 1
Jan 01 00:01:04 5 18 0 GetSocket Socket 0 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Jan 01 00:01:05 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:05 5 18 0 GetSocket Socket 0 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:05 5 18 0 Socket state e0
Jan 01 00:01:05 5 18 0 Card Inserted
Jan 01 00:01:05 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:06 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:07 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:08 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:08 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:09 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:09 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:11 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:11 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:12 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:12 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:14 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:14 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:15 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:15 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:17 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:17 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:18 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:18 5 18 0 GetStatus Socket 0 returned CardState e0 -
CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:18 5 18 0 GetSocket Socket 0 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State e0 - IREQRouting 0 - IFType 1
Jan 01 00:01:18 5 18 0 GetStatus Socket 1 returned CardState 0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Jan 01 00:01:18 2 18 0 devp-pccard: Terminated by signal 15
Jim
“Hardware Support Account” <> hw@qnx.com> > wrote in message
news:9jhpm0$r6k$> 1@nntp.qnx.com> …
Hi Jim,
OK, devp-pccard is detecting the controller.
Run slogger and start ‘devp-pccard -vvv’ with their card inserted in the
slot.
Wait 5 seconds and then slay devp-pccard and run sloginfo and send us the
output.
Regards,
Joe
Jim Moore <> jmoore@agvp.com> > wrote:
Joe,
I get the follow from sloginfo
Time Sev Major Minor Args
Jan 01 01:20:05 5 18 0 PCMCIA Controller
with 2
Sockets found
Jim
“Hardware Support Account” <> hw@qnx.com> > wrote in message
news:9jhf77$l0q$> 1@nntp.qnx.com> …
Hi Jim,
Sorry some important info got left out…
Make sure slogger is running, then run ‘devp-pccard ss -v’, use
sloginfo
to view the debug info.
Regards,
Joe
Jim Moore <> jmoore@agvp.com> > wrote:
The chip on the PCMCIA card is:
VADEM VG-468 A001
I get no console output on the 386sx when I type:
devp-pccard ss -v
Jim
“Hardware Support Account” <> hw@qnx.com> > wrote in message
news:9jh7sf$gqv$> 1@nntp.qnx.com> …
Hi Jim,
What PCMCIA chipset is on the 386sx? Also on the 386sx could you
run ‘devp-pccard ss -v’ and post the output here.
Thanks
Erick.
Ji m Moore <> jmoore849@carolina.rr.com> > wrote:
I am building a DSSS radio pass-thru device and the platform is a
386sx
processor with 4meg ram, 2 serial on a PC/104 bus with a PCMCIA
card
adapter
attached. I am using the DSSS PCMCIA card from CDS Technologies.
My problem is:
I build a floppy boot image under 6.10 with bare essentials
(console,
devp-pccard & pin).
When I boot this on a 486 platform and start devp-pccard then run
pin, I
see
the correct info (irq & port addr).
When I boot this image from the 386sx, pin returns blanks. Does
not
see
any
cards or info.
When I start devp-pccard -vvv, on the 486 all
insertions/extractions
are
reported. On the 386sx nothing is recognized.
I am also using the image=0x1A000 to create the image file due to
my
limited
memory space.
Are there 486 instructions in the devp-pccard or does this look
like
an
irq
conflict?
\
–
my opinions are mine, only mine, solely mine, and they are not related
in any possible way to the institution(s) in which I study and work.
Miguel Simon
Research Engineer
School of Aerospace and Mechanical Engineering
University of Oklahoma
http://www.amerobotics.ou.edu/
http://www.saic.com