Greeting,
both my QNX-6.1 systems are unable to resolve names to IPs. I can ping
both name servers; their IPs are correct (since FreeBSD and Windows
boxes have no problems with these nameservers). However, when I execute:
on either of QNX-6.1 boxes, ping hangs. They apparently fail to resolve
‘www.freebsd.org’ to 216.136.204.21.
I am connected to Internet via Cisco 827 router running NAT.
When I boot QNX-4.25 on that system (with exactly the same /etc/resolv.cof),
I have no problems with DNS.
Here is the some relevant info:
uname -a
QNX unix-1 6.1.0 2001/08/10-15:17:25edt x86pc x86
cat /etc/resolv.conf
domain primus.ca
nameserver 216.254.141.3
nameserver 209.90.160.221
This file is identical to the one on FreeBSD boxes.
ps -A
PID TTY TIME CMD
1 ? 00:21:18
2 ? 00:00:00 /sbin/tinit
3 ? 00:00:00 slogger
12292 ? 00:00:00 mqueue
5 ? 00:00:00 pci-bios
6 ? 00:00:04 devb-eide
7 ? 00:00:00 devc-con
8 ? 00:00:07 fs-pkg
4105 ? 00:00:00 pipe
905226 ? 00:00:00 ps
45067 ? 00:00:00 devc-pty
77836 ? 00:00:00 devc-par
213005 ? 00:00:00 inetd
77838 ? 00:00:00 spooler
77839 ? 00:00:00 io-net
110608 ? 00:00:00 devb-fdc
94225 ? 00:00:00 devc-ser8250
118802 ? 00:00:00 random
131091 ? 00:00:00 dumper
147476 ? 00:00:00 -sh
147477 ? 00:00:00 login
147478 ? 00:00:00 login
147479 ? 00:00:00 login
897048 ? 00:00:00 inetd
I would greatly appreciate any help.
regards, Andray
Can you post what the output of “getconf RESOLVE” ? Also, try using the
photon utility phlip to configure your network settings and see if that
improves the situation.
–
Cheers,
Adam
With a PC, I always felt limited by the software available.
On Unix, I am limited only by my knowledge.
–Peter J. Schoenster <pschon@baste.magibox.net>
“Andray Kaganovsky” <andreykNOSPAM@home.com> wrote in message
news:Xns9198CFD25E5A6andreykhomecom@209.226.137.7…
Greeting,
both my QNX-6.1 systems are unable to resolve names to IPs. I can ping
both name servers; their IPs are correct (since FreeBSD and Windows
boxes have no problems with these nameservers). However, when I execute:
on either of QNX-6.1 boxes, ping hangs. They apparently fail to resolve
'> www.freebsd.org> ’ to 216.136.204.21.
I am connected to Internet via Cisco 827 router running NAT.
When I boot QNX-4.25 on that system (with exactly the same
/etc/resolv.cof),
I have no problems with DNS.
Here is the some relevant info:
uname -a
QNX unix-1 6.1.0 2001/08/10-15:17:25edt x86pc x86
cat /etc/resolv.conf
domain primus.ca
nameserver 216.254.141.3
nameserver 209.90.160.221
This file is identical to the one on FreeBSD boxes.
ps -A
PID TTY TIME CMD
1 ? 00:21:18
2 ? 00:00:00 /sbin/tinit
3 ? 00:00:00 slogger
12292 ? 00:00:00 mqueue
5 ? 00:00:00 pci-bios
6 ? 00:00:04 devb-eide
7 ? 00:00:00 devc-con
8 ? 00:00:07 fs-pkg
4105 ? 00:00:00 pipe
905226 ? 00:00:00 ps
45067 ? 00:00:00 devc-pty
77836 ? 00:00:00 devc-par
213005 ? 00:00:00 inetd
77838 ? 00:00:00 spooler
77839 ? 00:00:00 io-net
110608 ? 00:00:00 devb-fdc
94225 ? 00:00:00 devc-ser8250
118802 ? 00:00:00 random
131091 ? 00:00:00 dumper
147476 ? 00:00:00 -sh
147477 ? 00:00:00 login
147478 ? 00:00:00 login
147479 ? 00:00:00 login
897048 ? 00:00:00 inetd
I would greatly appreciate any help.
regards, Andray
[AndrayK 2]. Thanks a lot, Adam. I understand that /etc/net.cfg overrides
the /etc/resolv.conf, hence the problem. Once I updated /etc/net.cfg
using ‘phlip’, name resolution problem went away.
best regards,
Andray
“Adam Mallory” <amallory@qnx.com> wrote in news:a26img$ept$1@nntp.qnx.com:
Can you post what the output of “getconf RESOLVE” ? Also, try using the
photon utility phlip to configure your network settings and see if that
improves the situation.
–
Cheers,
Adam
QNX Software Systems Ltd.
[ > amallory@qnx.com > ]
With a PC, I always felt limited by the software available.
On Unix, I am limited only by my knowledge.
–Peter J. Schoenster <> pschon@baste.magibox.net
“Andray Kaganovsky” <> andreykNOSPAM@home.com> > wrote in message
news:Xns9198CFD25E5A6andreykhomecom@209.226.137.7…
Greeting,
both my QNX-6.1 systems are unable to resolve names to IPs. I can ping
both name servers; their IPs are correct (since FreeBSD and Windows
boxes have no problems with these nameservers). However, when I execute:
on either of QNX-6.1 boxes, ping hangs. They apparently fail to resolve
'> www.freebsd.org> ’ to 216.136.204.21.
I am connected to Internet via Cisco 827 router running NAT.
When I boot QNX-4.25 on that system (with exactly the same
/etc/resolv.cof), I have no problems with DNS.
Here is the some relevant info:
uname -a
QNX unix-1 6.1.0 2001/08/10-15:17:25edt x86pc x86
cat /etc/resolv.conf
domain primus.ca
nameserver 216.254.141.3
nameserver 209.90.160.221
This file is identical to the one on FreeBSD boxes.
ps -A
PID TTY TIME CMD
1 ? 00:21:18
2 ? 00:00:00 /sbin/tinit
3 ? 00:00:00 slogger
12292 ? 00:00:00 mqueue
5 ? 00:00:00 pci-bios
6 ? 00:00:04 devb-eide
7 ? 00:00:00 devc-con
8 ? 00:00:07 fs-pkg
4105 ? 00:00:00 pipe
905226 ? 00:00:00 ps
45067 ? 00:00:00 devc-pty
77836 ? 00:00:00 devc-par
213005 ? 00:00:00 inetd
77838 ? 00:00:00 spooler
77839 ? 00:00:00 io-net
110608 ? 00:00:00 devb-fdc
94225 ? 00:00:00 devc-ser8250
118802 ? 00:00:00 random
131091 ? 00:00:00 dumper
147476 ? 00:00:00 -sh
147477 ? 00:00:00 login
147478 ? 00:00:00 login
147479 ? 00:00:00 login
897048 ? 00:00:00 inetd
I would greatly appreciate any help.
regards, Andray