“LB” <firstname.lastname@example.org> wrote in message
I have tried tinit and stty settings but nothing comes up form the serial
It is working because I can redirect on /dev/ser1 and see text being shown
Furthermore some knowledgebase articles are related to old os versions and
does not seem to be working on rtp.
Make sure you select QNXRTP during your search.
Does anybody knows where to look for updated docs on this issue?
If you have 6.1A you have the latest publicly avaiable stuff.
There was a thread a few weeks ago about somebody doing just that,
can’t find it though ;-(
“Mario Charest” <> email@example.com> > wrote in message
news:a91li3$nqo$> firstname.lastname@example.org> …
“Mike Toreno” <> email@example.com> > wrote in message
news:a91l0f$h1u$> firstname.lastname@example.org> …
If I understand you correctly you want to run a “HyperTerminal” type
application on the QNX side. Try qtalk, which comes with QNX.
If what you want to do is the other way around, look at tinit
The format is as follows:
qtalk -b,,, -m <SerialPort
For example to connect thru serial port 1:
qtalk -b 9600,8,n,1 -m /dev/ser1
The help docs have more info on qtalk.
Hope this helps!
“LB” <> email@example.com> > wrote in message
news:a91hdu$kua$> firstname.lastname@example.org> …
I need to connect to a Qnx rtp system with a terminal emulation
like Hyperterminal ) connected through serial port 1 or 2.
Could someone help me to find informations on how to setup the qnx
Via Picotti 18
tel/fax 050 542361