Does QNX support any/all of these Internal modems?
(a) Winmodem
(b) PCI modem
(c) PCMCIA modem
If so where can i find drivers for that?
Does QNX support any/all of these Internal modems?
(a) Winmodem
(b) PCI modem
(c) PCMCIA modem
If so where can i find drivers for that?
“Praveen” <praveen@spacomp.com> wrote in message
news:ad7udc$bl2$1@inn.qnx.com…
Does QNX support any/all of these Internal modems?
(a) Winmodem
No
(b) PCI modem
Yes
(c) PCMCIA modem
Yes, if they are not winmodem
If so where can i find drivers for that?
that’s build-in. For PCI modem you may have to
manually start the serial port driver and provide the
IRQ and PORT as reported by the pci utility.
Thanks for the Reply.
Meanwhile i want to know whether AT (Fax) CLASS1/CLASS2 and AT VOICE
commands are supported in the internal modem/driver.
“Mario Charest” postmaster@l127.0.0.1 wrote in message
news:ad8044$d36$1@inn.qnx.com…
“Praveen” <> praveen@spacomp.com> > wrote in message
news:ad7udc$bl2$> 1@inn.qnx.com> …
Does QNX support any/all of these Internal modems?
(a) WinmodemNo
(b) PCI modem
Yes
(c) PCMCIA modem
Yes, if they are not winmodem
If so where can i find drivers for that?that’s build-in. For PCI modem you may have to
manually start the serial port driver and provide the
IRQ and PORT as reported by the pci utility.
\
“Praveen” <praveen@spacomp.com> wrote in message
news:adf246$dk5$1@inn.qnx.com…
Thanks for the Reply.
Meanwhile i want to know whether AT (Fax) CLASS1/CLASS2 and AT VOICE
commands are supported in the internal modem/driver.
There is no such thing as modem drivers in QNX (that’s why winmodem
aren’t supported). Command are sent command over the serial port
(if modem is internal it has its own serial port). Hence all commands
are supported. It’s just a matter of creating the application to make
use of these commands. I don’t know of any application that
handle fax under QNX6. As for AT normal command look at qtalk.
“Mario Charest” postmaster@l127.0.0.1 wrote in message
news:ad8044$d36$> 1@inn.qnx.com> …“Praveen” <> praveen@spacomp.com> > wrote in message
news:ad7udc$bl2$> 1@inn.qnx.com> …
Does QNX support any/all of these Internal modems?
(a) WinmodemNo
(b) PCI modem
Yes
(c) PCMCIA modem
Yes, if they are not winmodem
If so where can i find drivers for that?that’s build-in. For PCI modem you may have to
manually start the serial port driver and provide the
IRQ and PORT as reported by the pci utility.
\