Any progress being made on drivers for dual displays, either using cards
that have two outputs (like the matrox) or using two cards?
We are eagerly awaiting this.
–
Art Hays
National Institutes of Health
avhays@nih.gov
Hi Art,
Which version of the OS are you running? Dual display is already supported
using 2 cards for QNX6.1 or greater, on
a lot of chipsets. Did you have a particular chipsets in mind?
We are currently working on dual display using a single card on ATI Radeon
and Matrox G450/550. It should be available in a future
release.
Regards,
Joe
“Art Hays” <avhays@nih.gov> wrote in message
news:ais1o2$c37$1@inn.qnx.com…
Any progress being made on drivers for dual displays, either using cards
that have two outputs (like the matrox) or using two cards?We are eagerly awaiting this.
–
Art Hays
National Institutes of Health
avhays@nih.gov
I’m running 6.2NC. Please post which cards will work in dual configuration,
and any specifics. Thanks!
“Hardware Support” <hw@qnx.com> wrote in message news:ajb0ba$n6r$1@nntp.qnx.com…
Hi Art,
Which version of the OS are you running? Dual display is already supported
using 2 cards for QNX6.1 or greater, on
a lot of chipsets. Did you have a particular chipsets in mind?We are currently working on dual display using a single card on ATI Radeon
and Matrox G450/550. It should be available in a future
release.Regards,
Joe
“Art Hays” <> avhays@nih.gov> > wrote in message
news:ais1o2$c37$> 1@inn.qnx.com> …
Any progress being made on drivers for dual displays, either using cards
that have two outputs (like the matrox) or using two cards?We are eagerly awaiting this.
–
Art Hays
National Institutes of Health
avhays@nih.gov
\
On Tue, 13 Aug 2002 17:59:17 -0400, “Art Hays” <avhays@nih.gov> wrote:
Not sure about 6.2, but check
http://www.qnx.com/support/sd_bok/solution.qnx?10445
ako
I’m running 6.2NC. Please post which cards will work in dual configuration,
and any specifics. Thanks!“Hardware Support” <> hw@qnx.com> > wrote in message news:ajb0ba$n6r$> 1@nntp.qnx.com> …
Hi Art,Which version of the OS are you running? Dual display is already supported
using 2 cards for QNX6.1 or greater, on
a lot of chipsets. Did you have a particular chipsets in mind?We are currently working on dual display using a single card on ATI Radeon
and Matrox G450/550. It should be available in a future
release.Regards,
Joe
“Art Hays” <> avhays@nih.gov> > wrote in message
news:ais1o2$c37$> 1@inn.qnx.com> …
Any progress being made on drivers for dual displays, either using cards
that have two outputs (like the matrox) or using two cards?We are eagerly awaiting this.
–
Art Hays
National Institutes of Health
avhays@nih.gov
\
Hi Art,
We don’t have a specific list available, but a few types of chipsets
that have been known to work include:
ATI Rage128
ATI RagePro
ATI Radeon
3df Voodoo3/Banshee
TVIA Cyberpro 5000
TVIA Cyberpro 5300
Many other cards should work, but it may be necessary to use an
unaccelerated generic driver.
Regards,
Joe
“Art Hays” <avhays@nih.gov> wrote in message news:ajbv4i$up$1@inn.qnx.com…
I’m running 6.2NC. Please post which cards will work in dual
configuration,
and any specifics. Thanks!“Hardware Support” <> hw@qnx.com> > wrote in message
news:ajb0ba$n6r$> 1@nntp.qnx.com> …
Hi Art,Which version of the OS are you running? Dual display is already
supported
using 2 cards for QNX6.1 or greater, on
a lot of chipsets. Did you have a particular chipsets in mind?We are currently working on dual display using a single card on ATI
Radeon
and Matrox G450/550. It should be available in a future
release.Regards,
Joe
“Art Hays” <> avhays@nih.gov> > wrote in message
news:ais1o2$c37$> 1@inn.qnx.com> …
Any progress being made on drivers for dual displays, either using
cards
that have two outputs (like the matrox) or using two cards?We are eagerly awaiting this.
–
Art Hays
National Institutes of Health
avhays@nih.gov
\
Is is possible for someone to update
http://www.qnx.com/support/sd_bok/solution.qnx?10445
with anything needed?
The dual monitor is very important for our applications. This is one
feature built into W2k that we are jealous over.
“Hardware Support” <hw@qnx.com> wrote in message news:ajg8l2$3ak$1@nntp.qnx.com…
Hi Art,
We don’t have a specific list available, but a few types of chipsets
that have been known to work include:ATI Rage128
ATI RagePro
ATI Radeon
3df Voodoo3/Banshee
TVIA Cyberpro 5000
TVIA Cyberpro 5300Many other cards should work, but it may be necessary to use an
unaccelerated generic driver.Regards,
Joe
“Art Hays” <> avhays@nih.gov> > wrote in message news:ajbv4i$up$> 1@inn.qnx.com> …
I’m running 6.2NC. Please post which cards will work in dual
configuration,
and any specifics. Thanks!“Hardware Support” <> hw@qnx.com> > wrote in message
news:ajb0ba$n6r$> 1@nntp.qnx.com> …
Hi Art,Which version of the OS are you running? Dual display is already
supported
using 2 cards for QNX6.1 or greater, on
a lot of chipsets. Did you have a particular chipsets in mind?We are currently working on dual display using a single card on ATI
Radeon
and Matrox G450/550. It should be available in a future
release.Regards,
Joe
“Art Hays” <> avhays@nih.gov> > wrote in message
news:ais1o2$c37$> 1@inn.qnx.com> …
Any progress being made on drivers for dual displays, either using
cards
that have two outputs (like the matrox) or using two cards?We are eagerly awaiting this.
–
Art Hays
National Institutes of Health
avhays@nih.gov
\