Dear all
The online help says that phditto -m/dev/ser2 will bring up terminal that
allows a user to log onto a remote computer. All I get is a memory error
core dump message.
qtalk to the modem works fine so the hardware is alright.
Any insight.
The online help makes remote connectivity sound simple
phditto -m/devserx
type in phone number
logon
exec phrelay etc
bingo
photon on the remote
what a lot of crap. It was easy under 4.25 what went wrong with RTP.
I must admit that the tcpip connection is as simple as pie, so I must
congratulate QSSL for that.
–
Rodney Stevens
CSIRO Minerals
Phone 61 2 97106701
Fax 61 2 97106789
Email r.stevens@minerals.csiro.au
Elan SS s/e 45/7616
http://sites.netscape.net/rodjohnstevens/homepage
Hi Rodney,
Thanks for bringing this to our attention it is a bug…and will be
fixed for the next release.
Thanks
Brenda
Rodney Stevens wrote:
Dear all
The online help says that phditto -m/dev/ser2 will bring up terminal that
allows a user to log onto a remote computer. All I get is a memory error
core dump message.
qtalk to the modem works fine so the hardware is alright.
Any insight.
The online help makes remote connectivity sound simple
phditto -m/devserx
type in phone number
logon
exec phrelay etc
bingo
photon on the remote
what a lot of crap. It was easy under 4.25 what went wrong with RTP.
I must admit that the tcpip connection is as simple as pie, so I must
congratulate QSSL for that.
–
Rodney Stevens
CSIRO Minerals
Phone 61 2 97106701
Fax 61 2 97106789
Email > r.stevens@minerals.csiro.au
Elan SS s/e 45/7616
http://sites.netscape.net/rodjohnstevens/homepage
\
Dear Brenda /GUI Group
Sorry if I was a bit turse in my previous email but I have become very
frustrated in my efforts to connect two qnxrtp boxes via modems and this is
not the only issue. As I said it was easy under 4.25.
Does this bug also mean that I cannot launch phditto from the connect menu
using pppd over a serial port/modem or is this ok as it is using tcp/ip.
Thanks Rod
“GUI Group” <gui@qnx.com> wrote in message news:3C18DFAD.1050500@qnx.com…
Hi Rodney,
Thanks for bringing this to our attention it is a bug…and will be
fixed for the next release.
Thanks
Brenda
Rodney Stevens wrote:
Dear all
The online help says that phditto -m/dev/ser2 will bring up terminal
that
allows a user to log onto a remote computer. All I get is a memory
error
core dump message.
Hi Rodney,
I double checked with the developers and you can use the pppd over a
serial connection because it is using tcp/ip. So this bug shouldn’t have
any effect on this.
Regards
Brenda
Rodney Stevens wrote:
Dear Brenda /GUI Group
Sorry if I was a bit turse in my previous email but I have become very
frustrated in my efforts to connect two qnxrtp boxes via modems and this is
not the only issue. As I said it was easy under 4.25.
Does this bug also mean that I cannot launch phditto from the connect menu
using pppd over a serial port/modem or is this ok as it is using tcp/ip.
Thanks Rod
“GUI Group” <> gui@qnx.com> > wrote in message news:> 3C18DFAD.1050500@qnx.com> …
Hi Rodney,
Thanks for bringing this to our attention it is a bug…and will be
fixed for the next release.
Thanks
Brenda
Rodney Stevens wrote:
Dear all
The online help says that phditto -m/dev/ser2 will bring up terminal
that
allows a user to log onto a remote computer. All I get is a memory
error
core dump message.
\