C&T 65545 Supported?

Is the C&T 65545 supported? The web site lists several 6555x and 690xx
chipsets, but not 65545. I’m looking for a PC/104 VGA card, and the majority
of the ones I’ve seen use the 65545.

Thanks,
Marty

Unfortunately this chip set isn´t supported.

Regards,
Dave B.


Marty Doane wrote:

Is the C&T 65545 supported? The web site lists several 6555x and 690xx
chipsets, but not 65545. I’m looking for a PC/104 VGA card, and the majority
of the ones I’ve seen use the 65545.

Thanks,
Marty

apps wrote:

Unfortunately this chip set isn´t supported.

Regards,
Dave B.


Marty Doane wrote:

Is the C&T 65545 supported? The web site lists several 6555x and 690xx
chipsets, but not 65545. I’m looking for a PC/104 VGA card, and the
majority
of the ones I’ve seen use the 65545.

Thanks,
Marty

Oh now there’s a bummer - the embedded board we designed in
work has the 65545 / 65548 on it - runs qnx4.25 fine, I was
wondering about putting QNX RTP onto one. Guess not now…

I do know that the 65550 works fine, I’ve got RTP running
on my TB486 card, made by DSP Design. They also do a separate
PC104 video card, but it’s a tad expensive!
www.dspdesign.com


Regards

Richard Bebbington
Electric Mini pickup
http://homepage.ntlworld.com/electric.mini/

FYI, you should still be able to use RTP
with C&65545, but there will be no acceleration since it
will use one of the generic drivers.

Thanks

Erick.





Oh now there’s a bummer - the embedded board we designed in
work has the 65545 / 65548 on it - runs qnx4.25 fine, I was
wondering about putting QNX RTP onto one. Guess not now…

I do know that the 65550 works fine, I’ve got RTP running
on my TB486 card, made by DSP Design. They also do a separate
PC104 video card, but it’s a tad expensive!
www.dspdesign.com



Regards

Richard Bebbington
Electric Mini pickup
http://homepage.ntlworld.com/electric.mini/

In article <a2hsn2$k87$1@nntp.qnx.com>, Hardware Support Account
<hw@qnx.com> writes

FYI, you should still be able to use RTP
with C&65545, but there will be no acceleration since it
will use one of the generic drivers.

Thanks

Erick.

Just out of interest, is it possible to use the
65550 drivers? Or will they not work because the
65545 doesn’t have some hardware features they need?
( I’ve probably just answered my own question! :wink:

Regards

Richard Bebbington