I use the -o and -I options, like this:
io-graphics -g1024x768x16 -dldevg-ati_rage128.so -I0 -d0x1002,0x5050;
io-graphics -g1024x768x16 -dldevg-ati_rage128.so -I1 -o1024 -d0x1002,0x5050;
io-graphics -g1024x768x16 -dldevg-ati_rage128.so -I2 -o2048 -d0x1002,0x5050;
io-graphics -g1024x768x16 -dldevg-ati_rage128.so -I3 -o3072 -d0x1002,0x5050;
James
“Alain Bonnefoy” <alain.bonnefoy@icbt.com> wrote in message
news:3C4EB3A3.BC8ED269@icbt.com…
James Carmody a écrit :
I extend the display (although I did try 2 photon sessions, and see the
same
behaviour).
I currently use 4 ati cards and rage128 under QNX4, with an extended
display, and it works quite well. I have
had success with 3 monitor setups in the past (under QNX4) using VooDoo
3
(Banshee driver) and
Diamond Stealth cards (forget which driver it was).
“Mario Charest” <> goto@nothingness.com> > wrote in message
news:a2i1vt$c67$> 1@inn.qnx.com> …
“James Carmody” <> carmodyj@aecl.ca> > wrote in message
news:a2hsbm$8r8$> 1@inn.qnx.com> …
- I have installed the latest version of RTP, and have 4 ati Xpert
video
cards installed. I can start 2 rage128 drivers no problem, and 2
screens
are active. When I start the 3rd, everything freezes. Any ideas?
Anybody
out there use more than 2 rage drivers at once?
Do you extend the display or do you run 2 photon sessions?
Try running two Photon session instead, if that doesn’t work
may be it’s a hardware limitation.
2) When will RTP have official multi-monitor support (in
particular,
for
rage128)?
I beleive a generic solution for multi-monitor is a difficult task.
For now QNX has never supported it official, although they
are able to do it via custom reques (thus $$$).
I have no idea what are their plan for the futur.
James Carmody
Atomic Energy of Canada Ltd.
carmodyj@aecl.ca
I’d like to test it, could you give me some infos please, AFAIR we have
start
the second driver with an x or Y offset, no?
Thanks,
Alain.