I know that someone had addressed this once before, but I lost the thread.
I cannot run DDD from a phindows session. Whenever I type an underscore “_”,
none appears and anything I type after that is in uppercase. This is really
annoying, forcing me to run DDD on the host machine in the lab. I would
prefer to run it remotely from my desk instead.
I have downloaded Phindows 2.0 in the hopes of solving my problems, but this
did not fix the issue. If I remember the post correctly, there is some
configuration that must be performed after installation of X (funny thought
that this does not automatically occur as part of the QNX installation).
That’s right, this is because XPhoton is not localized and doesn’t
support any other keyboard than US.
Now I use VNC (look at http://sourceforge.net/projects/openqnx/), it
works fine and faster than with XPhoton.
regards,
Alain.
Randy Aeberhardt wrote:
I know that someone had addressed this once before, but I lost the thread.
I cannot run DDD from a phindows session. Whenever I type an underscore “_”,
none appears and anything I type after that is in uppercase. This is really
annoying, forcing me to run DDD on the host machine in the lab. I would
prefer to run it remotely from my desk instead.
I have downloaded Phindows 2.0 in the hopes of solving my problems, but this
did not fix the issue. If I remember the post correctly, there is some
configuration that must be performed after installation of X (funny thought
that this does not automatically occur as part of the QNX installation).
You are probably wasting money by using phindows.
You can send me your phindows license so that I can see if it can
be better used
since you are using ddd (an x applications), it doesn’t make sense
to use phindows->qnx photon->xphoton->x application.
it is a lot easier to do VNC → VNC server → x application
I know that someone had addressed this once before, but I lost the thread.
I cannot run DDD from a phindows session. Whenever I type an underscore “_”,
none appears and anything I type after that is in uppercase. This is really
annoying, forcing me to run DDD on the host machine in the lab. I would
prefer to run it remotely from my desk instead.
I have downloaded Phindows 2.0 in the hopes of solving my problems, but this
did not fix the issue. If I remember the post correctly, there is some
configuration that must be performed after installation of X (funny thought
that this does not automatically occur as part of the QNX installation).
Just a little point :-[ , with vnc, you will need the DDD version
available on this site!
cheers,
Alain.
Alain Bonnefoy wrote:
That’s right, this is because XPhoton is not localized and doesn’t
support any other keyboard than US.
Now I use VNC (look at > http://sourceforge.net/projects/openqnx/> ), it
works fine and faster than with XPhoton.
regards,
Alain.
Randy Aeberhardt wrote:
I know that someone had addressed this once before, but I lost the
thread.
I cannot run DDD from a phindows session. Whenever I type an
underscore “_”,
none appears and anything I type after that is in uppercase. This is
really
annoying, forcing me to run DDD on the host machine in the lab. I would
prefer to run it remotely from my desk instead.
I have downloaded Phindows 2.0 in the hopes of solving my problems,
but this
did not fix the issue. If I remember the post correctly, there is some
configuration that must be performed after installation of X (funny
thought
that this does not automatically occur as part of the QNX installation).
I use phindows to run “jed” and compile and link my applications.
I’d like to use DDD under phindows to debuy my applications as well.
Now, the statement “doesn’t support any keyboard other than US”, tends to
make me believe that I could get DDD running with the US keyboard - but I am
using the US keyboard (although I am using “Canadian English” for
language).
Am I missing something here. I distinctly remember a thread where someone
said that they have DDD running under Phindows, but they had to make changes
to some configuration files?
That’s right, this is because XPhoton is not localized and doesn’t
support any other keyboard than US.
Now I use VNC (look at > http://sourceforge.net/projects/openqnx/> ), it
works fine and faster than with XPhoton.
regards,
Alain.
Randy Aeberhardt wrote:
I know that someone had addressed this once before, but I lost the
thread.
I cannot run DDD from a phindows session. Whenever I type an
underscore “_”,
none appears and anything I type after that is in uppercase. This is
really
annoying, forcing me to run DDD on the host machine in the lab. I would
prefer to run it remotely from my desk instead.
I have downloaded Phindows 2.0 in the hopes of solving my problems,
but this
did not fix the issue. If I remember the post correctly, there is some
configuration that must be performed after installation of X (funny
thought
that this does not automatically occur as part of the QNX
installation).
I use phindows to run “jed” and compile and link my applications.
I’d like to use DDD under phindows to debuy my applications as well.
Now, the statement “doesn’t support any keyboard other than US”, tends to
make me believe that I could get DDD running with the US keyboard - but I am
using the US keyboard (although I am using “Canadian English” for
language).
Am I missing something here. I distinctly remember a thread where someone
said that they have DDD running under Phindows, but they had to make changes
to some configuration files?
Just a little point :-[ , with vnc, you will need the DDD version
available on this site!
cheers,
Alain.
Alain Bonnefoy wrote:
That’s right, this is because XPhoton is not localized and doesn’t
support any other keyboard than US.
Now I use VNC (look at > http://sourceforge.net/projects/openqnx/> ), it
works fine and faster than with XPhoton.
regards,
Alain.
Randy Aeberhardt wrote:
I know that someone had addressed this once before, but I lost the
thread.
I cannot run DDD from a phindows session. Whenever I type an
underscore “_”,
none appears and anything I type after that is in uppercase. This is
really
annoying, forcing me to run DDD on the host machine in the lab. I would
prefer to run it remotely from my desk instead.
I have downloaded Phindows 2.0 in the hopes of solving my problems,
but this
did not fix the issue. If I remember the post correctly, there is some
configuration that must be performed after installation of X (funny
thought
that this does not automatically occur as part of the QNX
installation).
It seems that you are right. I tried again the qnx ddd version with
phindows and a US keyboard, and I cannot get any [shift] key of the
first keyboard line.
Don’t know why. sorry!
regards,
Alain.
Randy Aeberhardt wrote:
I use phindows to run “jed” and compile and link my applications.
I’d like to use DDD under phindows to debuy my applications as well.
Now, the statement “doesn’t support any keyboard other than US”, tends to
make me believe that I could get DDD running with the US keyboard - but I am
using the US keyboard (although I am using “Canadian English” for
language).
Am I missing something here. I distinctly remember a thread where someone
said that they have DDD running under Phindows, but they had to make changes
to some configuration files?
Just a little point :-[ , with vnc, you will need the DDD version
available on this site!
cheers,
Alain.
Alain Bonnefoy wrote:
That’s right, this is because XPhoton is not localized and doesn’t
support any other keyboard than US.
Now I use VNC (look at > http://sourceforge.net/projects/openqnx/> ), it
works fine and faster than with XPhoton.
regards,
Alain.
Randy Aeberhardt wrote:
I know that someone had addressed this once before, but I lost the
thread.
I cannot run DDD from a phindows session. Whenever I type an
underscore “_”,
none appears and anything I type after that is in uppercase. This is
really
annoying, forcing me to run DDD on the host machine in the lab. I would
prefer to run it remotely from my desk instead.
I have downloaded Phindows 2.0 in the hopes of solving my problems,
but this
did not fix the issue. If I remember the post correctly, there is some
configuration that must be performed after installation of X (funny
thought
that this does not automatically occur as part of the QNX
It seems that you are right. I tried again the qnx ddd version with
phindows and a US keyboard, and I cannot get any [shift] key of the
first keyboard line.
have u tried the ddd from openqnx and see if it also has the
same problem with phindows? we can then say if it is phindows
problem or qnx ddd problem.
Don’t know why. sorry!
regards,
Alain.
Randy Aeberhardt wrote:
I use phindows to run “jed” and compile and link my applications.
I’d like to use DDD under phindows to debuy my applications as well.
Now, the statement “doesn’t support any keyboard other than US”, tends to
make me believe that I could get DDD running with the US keyboard - but I am
using the US keyboard (although I am using “Canadian English” for
language).
Am I missing something here. I distinctly remember a thread where someone
said that they have DDD running under Phindows, but they had to make changes
to some configuration files?
Just a little point :-[ , with vnc, you will need the DDD version
available on this site!
cheers,
Alain.
Alain Bonnefoy wrote:
That’s right, this is because XPhoton is not localized and doesn’t
support any other keyboard than US.
Now I use VNC (look at > http://sourceforge.net/projects/openqnx/> ), it
works fine and faster than with XPhoton.
regards,
Alain.
Randy Aeberhardt wrote:
I know that someone had addressed this once before, but I lost the
thread.
I cannot run DDD from a phindows session. Whenever I type an
underscore “_”,
none appears and anything I type after that is in uppercase. This is
really
annoying, forcing me to run DDD on the host machine in the lab. I would
prefer to run it remotely from my desk instead.
I have downloaded Phindows 2.0 in the hopes of solving my problems,
but this
did not fix the issue. If I remember the post correctly, there is some
configuration that must be performed after installation of X (funny
thought
that this does not automatically occur as part of the QNX
It seems that you are right. I tried again the qnx ddd version with phindows and a US keyboard, and I cannot get any [shift] key of the first keyboard line.
have u tried the ddd from openqnx and see if it also has the same problem with phindows? we can then say if it is phindows problem or qnx ddd problem.
I tried and it seems that it's a phindows problem!
I definitely advise you to download vnc, xfree and ddd from openqnx. Thanks
to Armin :wink:
Cheers,
Alain.
Don't know why. sorry!
regards, Alain. Randy Aeberhardt wrote:
I use phindows to run "jed" and compile and link my applications. I'd like to use DDD under phindows to debuy my applications as well. Now, the statement "doesn't support any keyboard other than US", tends to make me believe that I could get DDD running with the US keyboard - but I am using the US keyboard (although I am using "Canadian English" for language).
Am I missing something here. I distinctly remember a thread where someone said that they have DDD running under Phindows, but they had to make changes to some configuration files?
An alternative approach is to use an X server on the Windoze box, and set
DISPLAY in your Phindows pterm to connnect to the Windoze box. When you
launch ddd from a Phindows pterm, it opens an X window on the Windoze box.
We’ve been using the Hummingbird X server with Phindows in this way quite
successfully.
It seems that you are right. I tried again the qnx ddd version with phindows
and a US keyboard, and I cannot get any [shift] key of the first keyboard
line.
have u tried the ddd from openqnx and see if it also has the same problem
with phindows? we can then say if it is phindowsproblem or qnx ddd problem.
I tried and it seems that it’s a phindows problem!
I definitely advise you to download vnc, xfree and ddd from openqnx. Thanks
to Armin
Cheers,
Alain.
Don’t know why. sorry!
regards,Alain.Randy Aeberhardt wrote:
I use phindows to run “jed” and compile and link my applications.I’d like to
use DDD under phindows to debuy my applications as well.Now, the statement
“doesn’t support any keyboard other than US”, tends tomake me believe that I
could get DDD running with the US keyboard - but I amusing the US keyboard
(although I am using “Canadian English” forlanguage).Am I missing something
here. I distinctly remember a thread where someonesaid that they have DDD
running under Phindows, but they had to make changesto some configuration
files?–Randy
Aeberhardt<raeberhardt@tantalus-systems.com><www.tantalus-systems.com>“Alain
Bonnefoy” <alain.bonnefoy@ icbt.com> wrote in messagenews:3CBFC051.4010906@icbt.com…
Just a little point :-[ , with vnc, you will need the DDD versionavailable
on this site!cheers,Alain.Alain Bonnefoy wrote:
That’s right, this is because XPhoton is not localized and doesn’tsupport
any other keyboard than US.Now I use VNC (look at http://sourceforge.net/projects/openqnx/), itworks fine and faster than with
XPhoton.regards,Alain.Randy Aeberhardt wrote:
I know that someone had addressed this once before, but I lost thethread.I
cannot run DDD from a phindows session. Whenever I type anunderscore
“_”,none appears and anything I type after that is in uppercase. This
isreallyannoying, forcing me to run DDD on the host machine in the lab. I
wouldprefer to run it remotely from my desk instead.I have downloaded
Phindows 2.0 in the hopes of solving my problems,but thisdid not fix the
issue. If I remember the post correctly, there is someconfiguration that
must be performed after installation of X (funnythoughtthat this does not
automatically occur as part of the QNX
installation).
Any help would be appreciated.–Randy
Aeberhardt<raeberhardt@tantalus-systems.com><www.tantalus-systems.com>
An alternative approach is to use an X server on the Windoze box, and set
DISPLAY in your Phindows pterm to connnect to the Windoze box. When you
launch ddd from a Phindows pterm, it opens an X window on the Windoze box.
We’ve been using the Hummingbird X server with Phindows in this way quite
successfully.
X server will work, but why do you need Phindows then?
With X server on Windoze, you can remotely run X apps on QNX6 box,
or Photon apps (via phinx).
It seems that you are right. I tried again the qnx ddd version with phindows
and a US keyboard, and I cannot get any [shift] key of the first keyboard
line.
have u tried the ddd from openqnx and see if it also has the same problem
with phindows? we can then say if it is phindowsproblem or qnx ddd problem.
I tried and it seems that it’s a phindows problem!
I definitely advise you to download vnc, xfree and ddd from openqnx. Thanks
to Armin >
Cheers,
Alain.
Don’t know why. sorry!
regards,Alain.Randy Aeberhardt wrote:
I use phindows to run “jed” and compile and link my applications.I’d like to
use DDD under phindows to debuy my applications as well.Now, the statement
“doesn’t support any keyboard other than US”, tends tomake me believe that I
could get DDD running with the US keyboard - but I amusing the US keyboard
(although I am using “Canadian English” forlanguage).Am I missing something
here. I distinctly remember a thread where someonesaid that they have DDD
running under Phindows, but they had to make changesto some configuration
files?–Randy
Aeberhardt<> raeberhardt@tantalus-systems.com> ><www.tantalus-systems.com>“Alain
Bonnefoy” <alain.bonnefoy@ icbt.com> wrote in messagenews:> 3CBFC051.4010906@icbt.com> …
Just a little point :-[ , with vnc, you will need the DDD versionavailable
on this site!cheers,Alain.Alain Bonnefoy wrote:
That’s right, this is because XPhoton is not localized and doesn’tsupport
any other keyboard than US.Now I use VNC (look at http://sourceforge.net/projects/openqnx/> ), itworks fine and faster than with
XPhoton.regards,Alain.Randy Aeberhardt wrote:
I know that someone had addressed this once before, but I lost thethread.I
cannot run DDD from a phindows session. Whenever I type anunderscore
“_”,none appears and anything I type after that is in uppercase. This
isreallyannoying, forcing me to run DDD on the host machine in the lab. I
wouldprefer to run it remotely from my desk instead.I have downloaded
Phindows 2.0 in the hopes of solving my problems,but thisdid not fix the
issue. If I remember the post correctly, there is someconfiguration that
must be performed after installation of X (funnythoughtthat this does not
automatically occur as part of the QNX
installation).
Any help would be appreciated.–Randy
Aeberhardt<> raeberhardt@tantalus-systems.com> ><> www.tantalus-systems.com
Marty Doane <> marty.doane@rapistan.com> > wrote:
An alternative approach is to use an X server on the Windoze box, and
set
DISPLAY in your Phindows pterm to connnect to the Windoze box. When you
launch ddd from a Phindows pterm, it opens an X window on the Windoze
box.
We’ve been using the Hummingbird X server with Phindows in this way
quite
successfully.
X server will work, but why do you need Phindows then?
With X server on Windoze, you can remotely run X apps on QNX6 box,
or Photon apps (via phinx).
It seems that you are right. I tried again the qnx ddd version with
phindows
and a US keyboard, and I cannot get any [shift] key of the first
keyboard
line.
have u tried the ddd from openqnx and see if it also has the same
problem
with phindows? we can then say if it is phindowsproblem or qnx ddd
problem.
I tried and it seems that it’s a phindows problem!
I definitely advise you to download vnc, xfree and ddd from openqnx.
Thanks
to Armin >
Cheers,
Alain.
Don’t know why. sorry!
regards,Alain.Randy Aeberhardt wrote:
I use phindows to run “jed” and compile and link my applications.I’d
like to
use DDD under phindows to debuy my applications as well.Now, the
statement
“doesn’t support any keyboard other than US”, tends tomake me believe
that I
could get DDD running with the US keyboard - but I amusing the US
keyboard
(although I am using “Canadian English” forlanguage).Am I missing
something
here. I distinctly remember a thread where someonesaid that they have
DDD
running under Phindows, but they had to make changesto some
configuration
files?–Randy
Aeberhardt<> raeberhardt@tantalus-systems.com> ><www.tantalus-systems.com>“Alain
Bonnefoy” <alain.bonnefoy@ icbt.com> wrote in messagenews:> 3CBFC051.4010906@icbt.com> …
Just a little point :-[ , with vnc, you will need the DDD
versionavailable
on this site!cheers,Alain.Alain Bonnefoy wrote:
That’s right, this is because XPhoton is not localized and
doesn’tsupport
any other keyboard than US.Now I use VNC (look at http://sourceforge.net/projects/openqnx/> ), itworks fine and faster than
with
XPhoton.regards,Alain.Randy Aeberhardt wrote:
I know that someone had addressed this once before, but I lost
thethread.I
cannot run DDD from a phindows session. Whenever I type anunderscore
“_”,none appears and anything I type after that is in uppercase. This
isreallyannoying, forcing me to run DDD on the host machine in the lab.
I
wouldprefer to run it remotely from my desk instead.I have downloaded
Phindows 2.0 in the hopes of solving my problems,but thisdid not fix the
issue. If I remember the post correctly, there is someconfiguration
that
must be performed after installation of X (funnythoughtthat this does
not
automatically occur as part of the QNX
installation).
Any help would be appreciated.–Randy
Aeberhardt<> raeberhardt@tantalus-systems.com> ><> www.tantalus-systems.com
