where is the error log of IDE

QNX Newsgroups (Archives) qdn.public.qnxrtp.devtools
1

After successfully setting up the communication between the host and the
target,I tried to run the simple “hello world” programme in IDE,the trace
mode and the profile mode run good,but each time I try to run under the
simplest mode of “c/c++ application”,an error reported says" an internal
error has occurred,see error log for details",both in windows host and in
qnx host.I don’t know what’s wrong,so the best way is to be a chickabiddy to
read the error log,but where is it?

thanks

ChaoLi

2

Look under .metadata

dB

“ChaoLi” <xxs102@sohu.com> wrote in message news:ag3mgi$c48$1@inn.qnx.com…

After successfully setting up the communication between the host and the
target,I tried to run the simple “hello world” programme in IDE,the trace
mode and the profile mode run good,but each time I try to run under the
simplest mode of “c/c++ application”,an error reported says" an internal
error has occurred,see error log for details",both in windows host and in
qnx host.I don’t know what’s wrong,so the best way is to be a chickabiddy
to
read the error log,but where is it?

thanks

ChaoLi

3

Hi ChaoLi,

I had the same problem. A workaroud for me was to run it in debug mode first
and after that, it did work in normal run mode.
Try it.

Cheers

Joern

“ChaoLi” <xxs102@sohu.com> schrieb im Newsbeitrag
news:ag3mgi$c48$1@inn.qnx.com…

After successfully setting up the communication between the host and the
target,I tried to run the simple “hello world” programme in IDE,the trace
mode and the profile mode run good,but each time I try to run under the
simplest mode of “c/c++ application”,an error reported says" an internal
error has occurred,see error log for details",both in windows host and in
qnx host.I don’t know what’s wrong,so the best way is to be a chickabiddy
to
read the error log,but where is it?

thanks

ChaoLi

4

“Jörn Ihlenburg” <ihlenburg@web.de> wrote in message
news:ag7vjd$62f$1@inn.qnx.com…
| Hi ChaoLi,
|
| I had the same problem. A workaroud for me was to run it in debug mode
first
| and after that, it did work in normal run mode.
| Try it.
|
| Cheers
|
| Joern
|
| “ChaoLi” <xxs102@sohu.com> schrieb im Newsbeitrag
| news:ag3mgi$c48$1@inn.qnx.com…
| > After successfully setting up the communication between the host and the
| > target,I tried to run the simple “hello world” programme in IDE,the
trace
| > mode and the profile mode run good,but each time I try to run under the
| > simplest mode of “c/c++ application”,an error reported says" an internal
| > error has occurred,see error log for details",both in windows host and
in
| > qnx host.I don’t know what’s wrong,so the best way is to be a
chickabiddy
| to
| > read the error log,but where is it?
| >

Hi All,
The error log in Eclipse is found in
/metadata/.log

-Judy

¨¨¨°ºo§oº°¨¨¨¨°ºo§oº°¨¨¨¨°ºo§oº°¨¨¨¨°ºo§oº°¨¨¨¨°ºo§oº°¨¨¨
Judy N. Green Software Engineer

QNX Software Systems Ltd. 75 Terence Matthews Cres.
www.qnx.com Kanata, Ont. K2M 1W8

¨¨¨°ºo§oº°¨¨¨¨°ºo§oº°¨¨¨¨°ºo§oº°¨¨¨¨°ºo§oº°¨¨¨¨°ºo§oº°¨¨¨


| > thanks
| >
| > ChaoLi
| >
| >
|
|