qtalk cannot recieve via qcp

When I try to send a file from a remote site (running QNX4.25) to a
local machine running QNX6 via qxp through qtalk, qtalk reports
“qtalk: (read) Resource temporarily unavailable”
and proceeds to exit in what appears to be a clean exit with return
code of 1.

Also, qtalk will exit in the same way if you attempt to dial a number
using the predefined system list (using the ^A-d key combination).

Also, qtalk reports the current working directory as “/”, regardless
of what you try to set it to.

Andrew


Andrew Thomas, President, Cogent Real-Time Systems Inc.
162 Guelph Street, Suite 253, Georgetown, Ontario, Canada L7G 5X7
Email: andrew@cogent.ca WWW: http://www.cogent.ca

Andrew Thomas <andrew@cogent.ca> wrote:

Hello Andrew,

When I try to send a file from a remote site (running QNX4.25) to a
local machine running QNX6 via qxp through qtalk, qtalk reports
“qtalk: (read) Resource temporarily unavailable”
and proceeds to exit in what appears to be a clean exit with return
code of 1.

What version of QNX 6 are you using, can you post an output from
“uname -a”? There was a bug in 6.0, but it seemed to be fixed
in 6.1

Regards,

Marcin


Also, qtalk will exit in the same way if you attempt to dial a number
using the predefined system list (using the ^A-d key combination).

Also, qtalk reports the current working directory as “/”, regardless
of what you try to set it to.

Andrew


Andrew Thomas, President, Cogent Real-Time Systems Inc.
162 Guelph Street, Suite 253, Georgetown, Ontario, Canada L7G 5X7
Email: > andrew@cogent.ca > WWW: > http://www.cogent.ca