QNX 6.2NC +xf4.2 +Qt3

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP lockup problem.
So I’m searching the good way to make Qt3 works with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton (with a big P) or
compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t exist on the HD.

So, I install Photon 3D runtime and devel packages from third party software
CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem aboutl ib
between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH
LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH
export QTDIR PATH LD_LIBRARY_PATH

logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP lockup problem.
So I’m searching the good way to make Qt3 works with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton (with a big P) or
compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t exist on the HD.

So, I install Photon 3D runtime and devel packages from third party software
CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem aboutl ib
between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas - > http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

On Fri, 14 Jun 2002, Frank Liu wrote:

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH
LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH
export QTDIR PATH LD_LIBRARY_PATH

forgot to mention that you also need to set the locale or else
you will get a harmless warning when running “designer”.
put the following in your .profile also:
export LC_ALL=C

Frank

logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP lockup problem.
So I’m searching the good way to make Qt3 works with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton (with a big P) or
compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t exist on the HD.

So, I install Photon 3D runtime and devel packages from third party software
CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem aboutl ib
between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas - > http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas - > http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

On Fri, 14 Jun 2002, Frank Liu wrote:

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH
LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

I forgot to mention the X11 libs.
this should really be
LD_LIBRARY_PATH=$QTDIR/lib:/opt/X11R6/lib:$LD_LIBRARY_PATH
(you may have to use this order, until I have time to release a new
Qt3 for 6.2)

Frank

export QTDIR PATH LD_LIBRARY_PATH

forgot to mention that you also need to set the locale or else
you will get a harmless warning when running “designer”.
put the following in your .profile also:
export LC_ALL=C

Frank


logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP lockup problem.
So I’m searching the good way to make Qt3 works with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton (with a big P) or
compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t exist on the HD.

So, I install Photon 3D runtime and devel packages from third party software
CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem aboutl ib
between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas - > http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas - > http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas - > http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

And, for us X newbies, how about the startup commands for the X server:
designer complains that it can’t connect to the X server. I recall it
has something to do with startx and xinit but it has been 3 years since
I had to bother with X…

-----Original Message-----
From: openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of
Frank Liu
Sent: Friday, June 14, 2002 10:54 AM
To: Johan CARDON
Cc: openqnx-developer=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3


On Fri, 14 Jun 2002, Frank Liu wrote:

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

I forgot to mention the X11 libs.
this should really be
LD_LIBRARY_PATH=$QTDIR/lib:/opt/X11R6/lib:$LD_LIBRARY_PATH
(you may have to use this order, until I have time to release a new Qt3
for 6.2)

Frank

export QTDIR PATH LD_LIBRARY_PATH

forgot to mention that you also need to set the locale or else you
will get a harmless warning when running “designer”. put the following

in your .profile also: export LC_ALL=C

Frank


logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP
lockup problem. So I’m searching the good way to make Qt3 works
with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton (with a
big P) or compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t exist on
the HD.

So, I install Photon 3D runtime and devel packages from third
party software CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem
aboutl ib between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


Don’t miss the 2002 Sprint PCS Application Developer’s Conference August
25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source=dntextlink


openqnx-developer mailing list openqnx-developer=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

well, real newbies should read the mailing list archives first, right?
(cdm, can you post something about XPhoton usage, in case he
is really asking about using XPhone rather than X itself.)

Frank

On Mon, 17 Jun 2002, Lonnie VanZandt wrote:

And, for us X newbies, how about the startup commands for the X server:
designer complains that it can’t connect to the X server. I recall it
has something to do with startx and xinit but it has been 3 years since
I had to bother with X…

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Frank Liu
Sent: Friday, June 14, 2002 10:54 AM
To: Johan CARDON
Cc: openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



On Fri, 14 Jun 2002, Frank Liu wrote:

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

I forgot to mention the X11 libs.
this should really be
LD_LIBRARY_PATH=$QTDIR/lib:/opt/X11R6/lib:$LD_LIBRARY_PATH
(you may have to use this order, until I have time to release a new Qt3
for 6.2)

Frank

export QTDIR PATH LD_LIBRARY_PATH

forgot to mention that you also need to set the locale or else you
will get a harmless warning when running “designer”. put the following

in your .profile also: export LC_ALL=C

Frank


logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP
lockup problem. So I’m searching the good way to make Qt3 works
with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton (with a
big P) or compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t exist on
the HD.

So, I install Photon 3D runtime and devel packages from third
party software CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem
aboutl ib between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference August
25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source=dntextlink


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

I’m not a complete tyro with respect to X, but it has been a while. The
eventual goal is to run a QNX system without Photon but only with X and
Qt. To get there, though, I have to use designer within Photon to build
the UI. Here’s what I think: XFree86 is the X window manager when Photon
is not running and XPhoton is the window manager that allows X apps to
appear within Photon windows.

The XFree86 qpr package apparently doesn’t create all the needed config
files because xinit complains about a missing XFree86 config file on
start up.

Anyway, I much prefer source packages over binary ones because I can
readily read the install scripts included with the sources that mentions
all the config file install work that needs to be done. Without these, I
have to open manuals, review archives, etc. to recall the missing
pieces.

-----Original Message-----
From: openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of
Frank Liu
Sent: Monday, June 17, 2002 9:16 AM
To: openqnx-developer=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: RE: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



well, real newbies should read the mailing list archives first, right?
(cdm, can you post something about XPhoton usage, in case he is really
asking about using XPhone rather than X itself.)

Frank

On Mon, 17 Jun 2002, Lonnie VanZandt wrote:

And, for us X newbies, how about the startup commands for the X
server: designer complains that it can’t connect to the X server. I
recall it has something to do with startx and xinit but it has been 3
years since I had to bother with X…

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Frank Liu
Sent: Friday, June 14, 2002 10:54 AM
To: Johan CARDON
Cc: openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



On Fri, 14 Jun 2002, Frank Liu wrote:

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

I forgot to mention the X11 libs.
this should really be
LD_LIBRARY_PATH=$QTDIR/lib:/opt/X11R6/lib:$LD_LIBRARY_PATH
(you may have to use this order, until I have time to release a new
Qt3 for 6.2)

Frank

export QTDIR PATH LD_LIBRARY_PATH

forgot to mention that you also need to set the locale or else you
will get a harmless warning when running “designer”. put the
following

in your .profile also: export LC_ALL=C

Frank


logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP
lockup problem. So I’m searching the good way to make Qt3 works
with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton
(with a
big P) or compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t
exist on
the HD.

So, I install Photon 3D runtime and devel packages from third
party software CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem
aboutl ib between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


Don’t miss the 2002 Sprint PCS Application Developer’s
Conference August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source=dntextlink


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/

Aha, yes, changing the symlink of X->XFree86 to X->XPhoton makes a big
difference.

-----Original Message-----
From: openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of
Frank Liu
Sent: Monday, June 17, 2002 9:16 AM
To: openqnx-developer=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: RE: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



well, real newbies should read the mailing list archives first, right?
(cdm, can you post something about XPhoton usage, in case he is really
asking about using XPhone rather than X itself.)

Frank

On Mon, 17 Jun 2002, Lonnie VanZandt wrote:

And, for us X newbies, how about the startup commands for the X
server: designer complains that it can’t connect to the X server. I
recall it has something to do with startx and xinit but it has been 3
years since I had to bother with X…

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Frank Liu
Sent: Friday, June 14, 2002 10:54 AM
To: Johan CARDON
Cc: openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



On Fri, 14 Jun 2002, Frank Liu wrote:

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

I forgot to mention the X11 libs.
this should really be
LD_LIBRARY_PATH=$QTDIR/lib:/opt/X11R6/lib:$LD_LIBRARY_PATH
(you may have to use this order, until I have time to release a new
Qt3 for 6.2)

Frank

export QTDIR PATH LD_LIBRARY_PATH

forgot to mention that you also need to set the locale or else you
will get a harmless warning when running “designer”. put the
following

in your .profile also: export LC_ALL=C

Frank


logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP
lockup problem. So I’m searching the good way to make Qt3 works
with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton
(with a
big P) or compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t
exist on
the HD.

So, I install Photon 3D runtime and devel packages from third
party software CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem
aboutl ib between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


Don’t miss the 2002 Sprint PCS Application Developer’s
Conference August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source=dntextlink


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/

Frank,

So my mistake was not exiting out of Photon before running
xinit. Or, I could have passed XPhoton as a parameter to xinit within
Photon. Anyway, it works now.

Lonnie.

-----Original Message-----
From: openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of
Lonnie VanZandt
Sent: Monday, June 17, 2002 9:35 AM
To: ‘Frank Liu’; openqnx-developer=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: RE: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3


Aha, yes, changing the symlink of X->XFree86 to X->XPhoton makes a big
difference.

-----Original Message-----
From: openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of
Frank Liu
Sent: Monday, June 17, 2002 9:16 AM
To: openqnx-developer=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: RE: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



well, real newbies should read the mailing list archives first, right?
(cdm, can you post something about XPhoton usage, in case he is really
asking about using XPhone rather than X itself.)

Frank

On Mon, 17 Jun 2002, Lonnie VanZandt wrote:

And, for us X newbies, how about the startup commands for the X
server: designer complains that it can’t connect to the X server. I
recall it has something to do with startx and xinit but it has been 3
years since I had to bother with X…

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Frank Liu
Sent: Friday, June 14, 2002 10:54 AM
To: Johan CARDON
Cc: openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



On Fri, 14 Jun 2002, Frank Liu wrote:

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

I forgot to mention the X11 libs.
this should really be
LD_LIBRARY_PATH=$QTDIR/lib:/opt/X11R6/lib:$LD_LIBRARY_PATH
(you may have to use this order, until I have time to release a new
Qt3 for 6.2)

Frank

export QTDIR PATH LD_LIBRARY_PATH

forgot to mention that you also need to set the locale or else you
will get a harmless warning when running “designer”. put the
following

in your .profile also: export LC_ALL=C

Frank


logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP
lockup problem. So I’m searching the good way to make Qt3 works
with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton
(with a
big P) or compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t
exist on
the HD.

So, I install Photon 3D runtime and devel packages from third
party software CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem
aboutl ib between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


Don’t miss the 2002 Sprint PCS Application Developer’s
Conference August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source=dntextlink


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/


openqnx-developer mailing list
openqnx-developer=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/

As I mentioned in my last email, you should really read the list
archives here:
http://www.geocrawler.com/lists/3/SourceForge/16494/0/
In particular, this post should tell you exactlly what you
need to do if you want to run the real X.
http://www.geocrawler.com/archives/3/16494/2002/3/0/8194286/

Now, if you just want to run XPhoton, you can simply type
“XPhoton” in your Photon pterm, assuming you’ve setup the PATH
and LD_LIBRARY_PATH correctly (see my post a few days ago
replying Johan about running Qt3 on qnx6.2.
cdm should be able to give you more information about running
XPhoton. I believe there are a few option you can play with.

Frank

On Mon, 17 Jun 2002, Lonnie VanZandt wrote:

Frank,

So my mistake was not exiting out of Photon before running
xinit. Or, I could have passed XPhoton as a parameter to xinit within
Photon. Anyway, it works now.

Lonnie.

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Lonnie VanZandt
Sent: Monday, June 17, 2002 9:35 AM
To: ‘Frank Liu’; openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: RE: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3


Aha, yes, changing the symlink of X->XFree86 to X->XPhoton makes a big
difference.

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Frank Liu
Sent: Monday, June 17, 2002 9:16 AM
To: openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: RE: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



well, real newbies should read the mailing list archives first, right?
(cdm, can you post something about XPhoton usage, in case he is really
asking about using XPhone rather than X itself.)

Frank

On Mon, 17 Jun 2002, Lonnie VanZandt wrote:

And, for us X newbies, how about the startup commands for the X
server: designer complains that it can’t connect to the X server. I
recall it has something to do with startx and xinit but it has been 3
years since I had to bother with X…

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Frank Liu
Sent: Friday, June 14, 2002 10:54 AM
To: Johan CARDON
Cc: openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



On Fri, 14 Jun 2002, Frank Liu wrote:

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

I forgot to mention the X11 libs.
this should really be
LD_LIBRARY_PATH=$QTDIR/lib:/opt/X11R6/lib:$LD_LIBRARY_PATH
(you may have to use this order, until I have time to release a new
Qt3 for 6.2)

Frank

export QTDIR PATH LD_LIBRARY_PATH

forgot to mention that you also need to set the locale or else you
will get a harmless warning when running “designer”. put the
following

in your .profile also: export LC_ALL=C

Frank


logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP
lockup problem. So I’m searching the good way to make Qt3 works
with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton
(with a
big P) or compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t
exist on
the HD.

So, I install Photon 3D runtime and devel packages from third
party software CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem
aboutl ib between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


Don’t miss the 2002 Sprint PCS Application Developer’s
Conference August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source=dntextlink


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

Thanks. I’m up and operational now.

-----Original Message-----
From: openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of
Frank Liu
Sent: Monday, June 17, 2002 10:27 AM
To: openqnx-developer=5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: RE: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



As I mentioned in my last email, you should really read the list
archives here: http://www.geocrawler.com/lists/3/SourceForge/16494/0/
In particular, this post should tell you exactlly what you
need to do if you want to run the real X.
http://www.geocrawler.com/archives/3/16494/2002/3/0/8194286/

Now, if you just want to run XPhoton, you can simply type “XPhoton” in
your Photon pterm, assuming you’ve setup the PATH and LD_LIBRARY_PATH
correctly (see my post a few days ago replying Johan about running Qt3
on qnx6.2. cdm should be able to give you more information about running
XPhoton. I believe there are a few option you can play with.

Frank

On Mon, 17 Jun 2002, Lonnie VanZandt wrote:

Frank,

So my mistake was not exiting out of Photon before running
xinit. Or,
I could have passed XPhoton as a parameter to xinit within Photon.
Anyway, it works now.

Lonnie.

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Lonnie VanZandt
Sent: Monday, June 17, 2002 9:35 AM
To: ‘Frank Liu’; openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: RE: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3


Aha, yes, changing the symlink of X->XFree86 to X->XPhoton makes a big

difference.

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Frank Liu
Sent: Monday, June 17, 2002 9:16 AM
To: openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: RE: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



well, real newbies should read the mailing list archives first, right?

(cdm, can you post something about XPhoton usage, in case he is
really asking about using XPhone rather than X itself.)

Frank

On Mon, 17 Jun 2002, Lonnie VanZandt wrote:

And, for us X newbies, how about the startup commands for the X
server: designer complains that it can’t connect to the X server. I
recall it has something to do with startx and xinit but it has been
3 years since I had to bother with X…

-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ] On Behalf Of
Frank Liu
Sent: Friday, June 14, 2002 10:54 AM
To: Johan CARDON
Cc: openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [Openqnx-developer] QNX 6.2NC +xf4.2 +Qt3



On Fri, 14 Jun 2002, Frank Liu wrote:

put the following (EXACTLY) in your .profile

QTDIR=/opt/X11R6/qt3
PATH=$QTDIR/bin:$PATH
LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

I forgot to mention the X11 libs.
this should really be
LD_LIBRARY_PATH=$QTDIR/lib:/opt/X11R6/lib:$LD_LIBRARY_PATH
(you may have to use this order, until I have time to release a new
Qt3 for 6.2)

Frank

export QTDIR PATH LD_LIBRARY_PATH

forgot to mention that you also need to set the locale or else you

will get a harmless warning when running “designer”. put the
following

in your .profile also: export LC_ALL=C

Frank


logout and login again.

now run “designer” and it should work.

Frank

On Fri, 14 Jun 2002, Johan CARDON wrote:

Hi everybody !
I have little time to test 6.2NC and resolve, I hope, my SMP
lockup problem. So I’m searching the good way to make Qt3
works with QNX 6.2NC.

Here is my test :
1- install QNX 6.2 NC from CDROM ;
2- install packages from 6.2NC CDROM ;
3- install XFree4.2 and Qt3 binaries from openqnx site ;

In this state, if I try to start designer under XPhoton
(with a
big P) or compile a Qt3 prog, I get this message :
unable to find libphrenderGL.so and this file doesn’t
exist on
the HD.

So, I install Photon 3D runtime and devel packages from third
party software CD.
re-test wih designer and get this result
unresolved symbols : glXQueryServerString
" : glXQueryExtension

What’s wrong with my install ? (I’m disoriented with problem
aboutl ib between 6.1 and 6.2).

Thanks

Institut Albert Bonniot
Johan CARDON Faculté de Medecine de Grenoble
Laboratoire IMAG/TIMC/GMCAO Domaine de la Merci
Tel: +33 (0)4 76 54 95 05 38706 La Tronche Cedex


_

Don’t miss the 2002 Sprint PCS Application Developer’s
Conference August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s
Conference August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Don’t miss the 2002 Sprint PCS Application Developer’s Conference
August 25-28 in Las Vegas -
http://devcon.sprintpcs.com/adp/index.cfm?source=dntextlink


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer

\


Sponsored by:
ThinkGeek at > http://www.ThinkGeek.com/


openqnx-developer mailing list openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer


Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/