Booting QNX 2 on Pentium System:

Hello Everyone,

I have QNX 2 installed on 486 Machine. I want to move my hard disk to
Pentium Machine so that it can run atleat on Pentium 133 or 166 MHz. Kindly
guide me what I will do to make my old hard disk bootable on Pentium
machine.

Thanks
Shumail

shumail@colormail.com

Hi Shumail,

Please see the QNX Knowledge Base

http://support.qnx.com/support/bok/

And do a search for “Pentium” with the OS set to “QNX 2”.

Erick.


Shumail <shumail@colormail.com> wrote:

Hello Everyone,

I have QNX 2 installed on 486 Machine. I want to move my hard disk to
Pentium Machine so that it can run atleat on Pentium 133 or 166 MHz. Kindly
guide me what I will do to make my old hard disk bootable on Pentium
machine.

Thanks
Shumail

shumail@colormail.com

I went to the web site your listed and did a search on QNX2/Pentium. The
response was nothing found???

Did I miss something?


Larry

Hardware Support Account wrote:

Hi Shumail,

Please see the QNX Knowledge Base

http://support.qnx.com/support/bok/

And do a search for “Pentium” with the OS set to “QNX 2”.

Erick.

Shumail <> shumail@colormail.com> > wrote:
Hello Everyone,

I have QNX 2 installed on 486 Machine. I want to move my hard disk to
Pentium Machine so that it can run atleat on Pentium 133 or 166 MHz. Kindly
guide me what I will do to make my old hard disk bootable on Pentium
machine.

Thanks
Shumail

shumail@colormail.com

Dixie Sams <dixie@imaginei.com> wrote:
: I went to the web site your listed and did a search on QNX2/Pentium. The
: response was nothing found???

: Did I miss something?

The following articles deal with what you want:

2000-04-14 How to increase the primary boot loader delay in QNX2 QNX.000009555
2000-03-20 Adaptec SCSI controller for QNX2 QNX.000009457
1999-01-04 Problems booting QNX2.21 on fast Pentium systems. QNX.000004547

I got them by seaching for Pentium with QNX2 selected as the OS.

Peter

: Larry

: Hardware Support Account wrote:

:> Hi Shumail,
:>
:> Please see the QNX Knowledge Base
:>
:> http://support.qnx.com/support/bok/
:>
:> And do a search for “Pentium” with the OS set to “QNX 2”.
:>
:> Erick.
:>
:> Shumail <shumail@colormail.com> wrote:
:> > Hello Everyone,
:>
:> > I have QNX 2 installed on 486 Machine. I want to move my hard disk to
:> > Pentium Machine so that it can run atleat on Pentium 133 or 166 MHz. Kindly
:> > guide me what I will do to make my old hard disk bootable on Pentium
:> > machine.
:>
:> > Thanks
:> > Shumail
:>
:> > shumail@colormail.com

The address below now gives a 404 page. NOT FOUND.

http://support.qnx.com/support/bok/

Bill williams



In article <9718tu$6s6$2@nntp.qnx.com>, hw@qnx.com (Hardware Support
Account) wrote:

Hi Shumail,

Please see the QNX Knowledge Base

http://support.qnx.com/support/bok/

And do a search for “Pentium” with the OS set to “QNX 2”.

Erick.

Anyone got any additional info on QNX2 running on Pentium type of Systems??

I have read the previous posted replies.

Any info would be appreciated.

Thanks,
Ray

“Bill Williams” <bw-news@scratchthis.datahighways.co.uk> wrote in message
news:memo.20020705024714.1372B@nyob.zen.co.uk

The address below now gives a 404 page. NOT FOUND.

http://support.qnx.com/support/bok/

Bill williams



In article <9718tu$6s6$> 2@nntp.qnx.com> >, > hw@qnx.com > (Hardware Support
Account) wrote:

Hi Shumail,

Please see the QNX Knowledge Base

http://support.qnx.com/support/bok/

And do a search for “Pentium” with the OS set to “QNX 2”.

Erick.