Does driver Fsys.aha7scsi in QNX 4.25 support SCSI adapter AHA-2910C based
on chip AIC-7856T ? It seems not. After executing Fsys.aha7scsi & produces
message SCSIINT in infinity loop. Does exist any solution of this problem ?
Thank you.
Vlastislav Sebesta
Hello,
I think you should be using Fsys.aha8scsi driver, which is included in the Patch C.
/bin/Fsys.aha8scsi - Initial version of the new aha8 SCSI driver.
- Offers support for any PCI card currently supported by the Adaptec
AIC-78xx family Common Hardware Interface Module (CHIM).
To download the latest patch (D), go to http://support.qnx.com/download/updates/qnx4_OS/index.html
and follow the instructions.
Best Regards,
Marcin
Vlastislav sebesta <elsys@sky.cz> wrote:
Does driver Fsys.aha7scsi in QNX 4.25 support SCSI adapter AHA-2910C based
on chip AIC-7856T ? It seems not. After executing Fsys.aha7scsi & produces
message SCSIINT in infinity loop. Does exist any solution of this problem ?
Thank you.
Vlastislav Sebesta
Hello,
Could you send me only Fsys.aha8scsi to try it and not to download the
whole patch ?
Thank you
Vlastislav Sebesta
“Marcin Dzieciol” <marcind@qnx.com> pí¹e v diskusním pøíspìvku
news:8up6jn$bkk$1@nntp.qnx.com…
Hello,
I think you should be using Fsys.aha8scsi driver, which is included in the
Patch C./bin/Fsys.aha8scsi - Initial version of the new aha8 SCSI driver.
- Offers support for any PCI card currently
supported by the Adaptec
AIC-78xx family Common Hardware Interface Module
(CHIM).To download the latest patch (D), go to
http://support.qnx.com/download/updates/qnx4_OS/index.html
and follow the instructions.Best Regards,
Marcin
Vlastislav sebesta <> elsys@sky.cz> > wrote:
Does driver Fsys.aha7scsi in QNX 4.25 support SCSI adapter AHA-2910C
based
on chip AIC-7856T ? It seems not. After executing Fsys.aha7scsi &
produces
message SCSIINT in infinity loop. Does exist any solution of this
problem ?
Thank you.
Vlastislav Sebesta
Vlastislav sebesta <elsys@sky.cz> wrote:
Hello,
Could you send me only Fsys.aha8scsi to try it and not to download the
whole patch ?
Thank you
Vlastislav Sebesta
Hello Vlatislav,
Sorry I can’t send you just the driver. It is recommended to download and install
the full patch.
Regards,
Marcin
“Marcin Dzieciol” <> marcind@qnx.com> > pí¹e v diskusním pøíspìvku
news:8up6jn$bkk$> 1@nntp.qnx.com> …Hello,
I think you should be using Fsys.aha8scsi driver, which is included in the
Patch C./bin/Fsys.aha8scsi - Initial version of the new aha8 SCSI driver.
- Offers support for any PCI card currently
supported by the Adaptec
AIC-78xx family Common Hardware Interface Module
(CHIM).To download the latest patch (D), go to
http://support.qnx.com/download/updates/qnx4_OS/index.html
and follow the instructions.Best Regards,
Marcin
Vlastislav sebesta <> elsys@sky.cz> > wrote:
Does driver Fsys.aha7scsi in QNX 4.25 support SCSI adapter AHA-2910C
based
on chip AIC-7856T ? It seems not. After executing Fsys.aha7scsi &
produces
message SCSIINT in infinity loop. Does exist any solution of this
problem ?
Thank you.
Vlastislav Sebesta