No sound/audio in QNX RTP

QNX Newsgroups (Archives) qdn.public.articles
1

Hi All,

I just installed QNX RTP and at first sight it look great, allthough I have
to get used to the interface.

The problem is that I cannot play any sounds. (wav/mp3). When I try to play
something I get the message that the audio is not configured.
In a faq it said to execute the following statement:
/sbin/enum-pnpisa

Here is the result of this action:
#897055 PNPBIOS version=1.00
#897055 PNPISA revision=1 num=1 ioport=20b
D897055 bus=isapnp devid=OPT0931 card=1 sernum=4294967295
D897055 bus=isapnp devid=OPT9310 ioport=036e ioport1=0168 irq=10
D897055 bus=isapnp devid=OPT0001 ioport=0534 ioport1=0380 ioport2=0220
ioport3=0e0c irq=5 dma=3 dma1=1
D897055 bus=isapnp devid=OPT0002 ioport=0204
F897055

The soundcard I use is a very simple 16-bit isa card.

Is there anyone who can help me with this prob? Please help me out…

Greetz,
Rogier

2

Please post in the appropriate newsgroup…
qdn.public.qnxrtp.newuser or qdn.public.qnxrtp.installation would be better
suited.

“Rogier” <r.wensink@devote.nl> wrote in message
news:95r8pc$e0h$1@inn.qnx.com…

Hi All,

I just installed QNX RTP and at first sight it look great, allthough I
have
to get used to the interface.

The problem is that I cannot play any sounds. (wav/mp3). When I try to
play
something I get the message that the audio is not configured.
In a faq it said to execute the following statement:
/sbin/enum-pnpisa

Here is the result of this action:
#897055 PNPBIOS version=1.00
#897055 PNPISA revision=1 num=1 ioport=20b
D897055 bus=isapnp devid=OPT0931 card=1 sernum=4294967295
D897055 bus=isapnp devid=OPT9310 ioport=036e ioport1=0168 irq=10
D897055 bus=isapnp devid=OPT0001 ioport=0534 ioport1=0380 ioport2=0220
ioport3=0e0c irq=5 dma=3 dma1=1
D897055 bus=isapnp devid=OPT0002 ioport=0204
F897055

The soundcard I use is a very simple 16-bit isa card.

Is there anyone who can help me with this prob? Please help me out…

Greetz,
Rogier