Hello,
i’ve a SCSI CDROM and CDR, but this devices are only optional.
There are also 2 EIDE HDs and on the 1st HD QNX is installed.
Under QNX i see my FAT32 partitions, the partitions on my 2nd HD i can’t
The IDE CDROM is not mounted.
How can i mount the IDE CDROM ??
I’ve tried the command
devb-eide
all devices were found.
Regards,
Robert
Hello,
ok, i’ve tried like this
t: devb-eide cam-cdrom.so
t: mount /dev/cd0 /fs/cd0
The CDROM was now available,
Another problem is my bootup, where i go something like this:
Detecting EIDE. Scanning for devices.
simq_timer: building_abord_cbb
ata_start_cbb: funk10
simq_timer: building_abord_cbb
ata_start_cbb: funk10
Detecting SCSI. Scanning for devices.
My question, how can i aviod to check for SCSI devices ??
Regards,
Robert
rj schrieb:
Hello,
i’ve a SCSI CDROM and CDR, but this devices are only optional.
There are also 2 EIDE HDs and on the 1st HD QNX is installed.
Under QNX i see my FAT32 partitions, the partitions on my 2nd HD i can’tThe IDE CDROM is not mounted.
How can i mount the IDE CDROM ??I’ve tried the command
devb-eide
all devices were found.Regards,
Robert