PCMCIA not working

Hi,

my PCMCIA controller is a Toshiba ToPIC97 CardBus Controller. I don’t know
what do I need to do to make it work! I would like to know if the PCMCIA and
the network card are separate things that I need to configure. I haven’t
find this PCMCIA under the supported hardware section!
Can anybody help me, please?

Thanks in advance…
Cesar

Hi,

You are posting in the wrong newsgroup, this newsgroup is for DDK issues only.
Please use a more appropriate newsgroups for future postings.

You must go into the Toshiba BIOS setup and change the PCCARD setup to
CardBus/16-bit. I presume that you are running RTP! After a reboot, devp-pccard
should be started and you should then see the network card. Because you don’t say
what network card you have, I’m not sure whether this will work.

Regards,

Joe

Cesar Ida <cesarida@inf.ufrgs.br> wrote:

Hi,

my PCMCIA controller is a Toshiba ToPIC97 CardBus Controller. I don’t know
what do I need to do to make it work! I would like to know if the PCMCIA and
the network card are separate things that I need to configure. I haven’t
find this PCMCIA under the supported hardware section!
Can anybody help me, please?

Thanks in advance…
Cesar