could someone let me know if my modem is usable for QNX 6.1? Below are the
specs.
Is this usable with QNX 6.1?
Thanks
Type of card/bits PCI, 32 bit
Manufacturer GVC
Manufacturer model SF-1156IV R9A
Chipset Conexant
Size of card 5.0" x 2.5"
COM port options COM1-COM4, plus unlimited Windows virtual ports
Interrupt options (IRQ) N/A (IRQ’s not applicable on PCI bus)
Fax modes ITU-T V.17, V.21, V.27ter, V.29, Class 1 and T.31 Class 1.0
Fax speeds 14,400 bps, 300 bps, 4800/2400 bps, 9600/7200 bps
Data modes ITU-T V.90, K56Flex, V.34+(33.6K), V.32bis, V.32, V.22bis, V.22,
V.23, V.21, Bell 212A, Bell 103
Data Speed 53333, 52000, 50666, 49333, 48000, 46666, 45333, 44000, 42666,
41333, 40000, 38666, 37333, 36000, 34666, 33600, 33333, 32000, 31200, 30666,
29333, 28800, 28000, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600,
7200, 4800, 2400, 1200, 300
Error correction ITU-T V.42, MNP Levels 2-4
Data compression ITU-T V.42bis, MNP Level 5
Automatic negotiation Yes
Command set V.250, V.251, V.253, V.8, V.8bis
Telephone lines Supports One Phone Line
Onboard diagnostics Digital and Analog, ITU-T V.54
Connectors Two RJ-11 (One for phone line, one for telephone set)
Cable RJ 11 cable (6 foot)