devi-hirun

Hello,
I ported Qnx with Photon on to the target(x86) & am sucessfuly booting
into Photon.
But though i have given devi-hirun with arguments i am unable to acess
keyboard & Mouse in the Target. But if i boot from a Qnx Installed
harddisk it is working Fine.
In the Target If i run my Photon Application from the Shell , then also i
am unable to acess Keyboard & Mouse.
My keyboard is IR keyboard mapped to IRQ1 & Mouse PS2 mapped to IRQ 12.
If i connect a normal ps2 keyboard & Mouse keyboard is Working but mouse
is not working.( i am havinbg only one ps2 port & i am using 2 way ps2
connector).The sane works fine if i connect Qnx loaded Harddisk & boot.
Anything i am missing.?
I can see from host that devi-hirun is running . The devi-hirun with
arguments are same as it is if i boot from Harddisk.
Can anybody point out any mistake.

you are missing uc_local_t. That is the file containing keyboard mapping and
so on.

you can find it in /root/.ph

Make sure you have that file and all the keyboard mappings on the places
where they belong.

Read the documentation about phlocale. That will explain the use of the file
I mentioned

Good luck,
Freddy

“vasdev” <vasdev_vs@hotmail.com> wrote in message
news:ankdhl$hs2$1@tiger.openqnx.com

Hello,
I ported Qnx with Photon on to the target(x86) & am sucessfuly booting
into Photon.
But though i have given devi-hirun with arguments i am unable to acess
keyboard & Mouse in the Target. But if i boot from a Qnx Installed
harddisk it is working Fine.
In the Target If i run my Photon Application from the Shell , then also i
am unable to acess Keyboard & Mouse.
My keyboard is IR keyboard mapped to IRQ1 & Mouse PS2 mapped to IRQ 12.
If i connect a normal ps2 keyboard & Mouse keyboard is Working but mouse
is not working.( i am havinbg only one ps2 port & i am using 2 way ps2
connector).The sane works fine if i connect Qnx loaded Harddisk & boot.
Anything i am missing.?
I can see from host that devi-hirun is running . The devi-hirun with
arguments are same as it is if i boot from Harddisk.
Can anybody point out any mistake.

Thanks u very much ,I will try & let u know about it
fmartens-2000 wrote:

you are missing uc_local_t. That is the file containing keyboard mapping and
so on.

you can find it in /root/.ph

Make sure you have that file and all the keyboard mappings on the places
where they belong.

Read the documentation about phlocale. That will explain the use of the file
I mentioned

Good luck,
Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:ankdhl$hs2$> 1@tiger.openqnx.com> …
Hello,
I ported Qnx with Photon on to the target(x86) & am sucessfuly booting
into Photon.
But though i have given devi-hirun with arguments i am unable to acess
keyboard & Mouse in the Target. But if i boot from a Qnx Installed
harddisk it is working Fine.
In the Target If i run my Photon Application from the Shell , then also i
am unable to acess Keyboard & Mouse.
My keyboard is IR keyboard mapped to IRQ1 & Mouse PS2 mapped to IRQ 12.
If i connect a normal ps2 keyboard & Mouse keyboard is Working but mouse
is not working.( i am havinbg only one ps2 port & i am using 2 way ps2
connector).The sane works fine if i connect Qnx loaded Harddisk & boot.
Anything i am missing.?
I can see from host that devi-hirun is running . The devi-hirun with
arguments are same as it is if i boot from Harddisk.
Can anybody point out any mistake.

Hi,
i copied the file uc_local_t in $HOME/.ph & further i copied entire
/usr/photon/keyboard directory into $PHOTON_PATH/keyboard.
Still it iis not working.Should i include any utilities or any other
files…

fmartens-2000 wrote:

you are missing uc_local_t. That is the file containing keyboard mapping and
so on.

you can find it in /root/.ph

Make sure you have that file and all the keyboard mappings on the places
where they belong.

Read the documentation about phlocale. That will explain the use of the file
I mentioned

Good luck,
Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:ankdhl$hs2$> 1@tiger.openqnx.com> …
Hello,
I ported Qnx with Photon on to the target(x86) & am sucessfuly booting
into Photon.
But though i have given devi-hirun with arguments i am unable to acess
keyboard & Mouse in the Target. But if i boot from a Qnx Installed
harddisk it is working Fine.
In the Target If i run my Photon Application from the Shell , then also i
am unable to acess Keyboard & Mouse.
My keyboard is IR keyboard mapped to IRQ1 & Mouse PS2 mapped to IRQ 12.
If i connect a normal ps2 keyboard & Mouse keyboard is Working but mouse
is not working.( i am havinbg only one ps2 port & i am using 2 way ps2
connector).The sane works fine if i connect Qnx loaded Harddisk & boot.
Anything i am missing.?
I can see from host that devi-hirun is running . The devi-hirun with
arguments are same as it is if i boot from Harddisk.
Can anybody point out any mistake.

check if ~.profile exists.

Try also sloginfo. This tool tells you what goes wrong.

Freddy

“vasdev” <vasdev_vs@hotmail.com> wrote in message
news:ano69c$plt$1@tiger.openqnx.com

Hi,
i copied the file uc_local_t in $HOME/.ph & further i copied entire
/usr/photon/keyboard directory into $PHOTON_PATH/keyboard.
Still it iis not working.Should i include any utilities or any other
files…

fmartens-2000 wrote:

you are missing uc_local_t. That is the file containing keyboard mapping
and
so on.

you can find it in /root/.ph

Make sure you have that file and all the keyboard mappings on the places
where they belong.

Read the documentation about phlocale. That will explain the use of the
file
I mentioned

Good luck,
Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:ankdhl$hs2$> 1@tiger.openqnx.com> …
Hello,
I ported Qnx with Photon on to the target(x86) & am sucessfuly booting
into Photon.
But though i have given devi-hirun with arguments i am unable to acess
keyboard & Mouse in the Target. But if i boot from a Qnx Installed
harddisk it is working Fine.
In the Target If i run my Photon Application from the Shell , then
also i
am unable to acess Keyboard & Mouse.
My keyboard is IR keyboard mapped to IRQ1 & Mouse PS2 mapped to IRQ
12.
If i connect a normal ps2 keyboard & Mouse keyboard is Working but
mouse
is not working.( i am havinbg only one ps2 port & i am using 2 way ps2
connector).The sane works fine if i connect Qnx loaded Harddisk &
boot.
Anything i am missing.?
I can see from host that devi-hirun is running . The devi-hirun with
arguments are same as it is if i boot from Harddisk.
Can anybody point out any mistake.



\

Hi,
In my embedded system i am not using login & hence .profile. I am booting
directly into Photon application & in the Baclground only shell will be
running.
Should i include login ? is anything needs to be checked

fmartens-2000 wrote:

check if ~.profile exists.

Try also sloginfo. This tool tells you what goes wrong.

Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:ano69c$plt$> 1@tiger.openqnx.com> …
Hi,
i copied the file uc_local_t in $HOME/.ph & further i copied entire
/usr/photon/keyboard directory into $PHOTON_PATH/keyboard.
Still it iis not working.Should i include any utilities or any other
files…

fmartens-2000 wrote:

you are missing uc_local_t. That is the file containing keyboard mapping
and
so on.

you can find it in /root/.ph

Make sure you have that file and all the keyboard mappings on the places
where they belong.

Read the documentation about phlocale. That will explain the use of the
file
I mentioned

Good luck,
Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:ankdhl$hs2$> 1@tiger.openqnx.com> …
Hello,
I ported Qnx with Photon on to the target(x86) & am sucessfuly booting
into Photon.
But though i have given devi-hirun with arguments i am unable to acess
keyboard & Mouse in the Target. But if i boot from a Qnx Installed
harddisk it is working Fine.
In the Target If i run my Photon Application from the Shell , then
also i
am unable to acess Keyboard & Mouse.
My keyboard is IR keyboard mapped to IRQ1 & Mouse PS2 mapped to IRQ
12.
If i connect a normal ps2 keyboard & Mouse keyboard is Working but
mouse
is not working.( i am havinbg only one ps2 port & i am using 2 way ps2
connector).The sane works fine if i connect Qnx loaded Harddisk &
boot.
Anything i am missing.?
I can see from host that devi-hirun is running . The devi-hirun with
arguments are same as it is if i boot from Harddisk.
Can anybody point out any mistake.



\

check out your PATH and LD_LIBRARY_PATH

Freddy

“vasdev” <vasdev_vs@hotmail.com> wrote in message
news:anrlut$b8n$1@tiger.openqnx.com

Hi,
In my embedded system i am not using login & hence .profile. I am booting
directly into Photon application & in the Baclground only shell will be
running.
Should i include login ? is anything needs to be checked

fmartens-2000 wrote:

check if ~.profile exists.

Try also sloginfo. This tool tells you what goes wrong.

Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:ano69c$plt$> 1@tiger.openqnx.com> …
Hi,
i copied the file uc_local_t in $HOME/.ph & further i copied entire
/usr/photon/keyboard directory into $PHOTON_PATH/keyboard.
Still it iis not working.Should i include any utilities or any other
files…

fmartens-2000 wrote:

you are missing uc_local_t. That is the file containing keyboard
mapping
and
so on.

you can find it in /root/.ph

Make sure you have that file and all the keyboard mappings on the
places
where they belong.

Read the documentation about phlocale. That will explain the use of
the
file
I mentioned

Good luck,
Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:ankdhl$hs2$> 1@tiger.openqnx.com> …
Hello,
I ported Qnx with Photon on to the target(x86) & am sucessfuly
booting
into Photon.
But though i have given devi-hirun with arguments i am unable to
acess
keyboard & Mouse in the Target. But if i boot from a Qnx Installed
harddisk it is working Fine.
In the Target If i run my Photon Application from the Shell , then
also i
am unable to acess Keyboard & Mouse.
My keyboard is IR keyboard mapped to IRQ1 & Mouse PS2 mapped to
IRQ
12.
If i connect a normal ps2 keyboard & Mouse keyboard is Working but
mouse
is not working.( i am havinbg only one ps2 port & i am using 2 way
ps2
connector).The sane works fine if i connect Qnx loaded Harddisk &
boot.
Anything i am missing.?
I can see from host that devi-hirun is running . The devi-hirun
with
arguments are same as it is if i boot from Harddisk.
Can anybody point out any mistake.








\

The problem was solved after i copied devi-hirun from Qnx 6.2 . previously
that uitility was from Qnx 6.1
“fmartens-2000” <fmartens-2000@planet.nl> wrote in message
news:ansg1a$jh2$1@inn.qnx.com

check out your PATH and LD_LIBRARY_PATH

Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:anrlut$b8n$> 1@tiger.openqnx.com> …
Hi,
In my embedded system i am not using login & hence .profile. I am
booting
directly into Photon application & in the Baclground only shell will be
running.
Should i include login ? is anything needs to be checked

fmartens-2000 wrote:

check if ~.profile exists.

Try also sloginfo. This tool tells you what goes wrong.

Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:ano69c$plt$> 1@tiger.openqnx.com> …
Hi,
i copied the file uc_local_t in $HOME/.ph & further i copied entire
/usr/photon/keyboard directory into $PHOTON_PATH/keyboard.
Still it iis not working.Should i include any utilities or any other
files…

fmartens-2000 wrote:

you are missing uc_local_t. That is the file containing keyboard
mapping
and
so on.

you can find it in /root/.ph

Make sure you have that file and all the keyboard mappings on the
places
where they belong.

Read the documentation about phlocale. That will explain the use
of
the
file
I mentioned

Good luck,
Freddy

“vasdev” <> vasdev_vs@hotmail.com> > wrote in message
news:ankdhl$hs2$> 1@tiger.openqnx.com> …
Hello,
I ported Qnx with Photon on to the target(x86) & am sucessfuly
booting
into Photon.
But though i have given devi-hirun with arguments i am unable to
acess
keyboard & Mouse in the Target. But if i boot from a Qnx
Installed
harddisk it is working Fine.
In the Target If i run my Photon Application from the Shell ,
then
also i
am unable to acess Keyboard & Mouse.
My keyboard is IR keyboard mapped to IRQ1 & Mouse PS2 mapped to
IRQ
12.
If i connect a normal ps2 keyboard & Mouse keyboard is Working
but
mouse
is not working.( i am havinbg only one ps2 port & i am using 2
way
ps2
connector).The sane works fine if i connect Qnx loaded Harddisk
&
boot.
Anything i am missing.?
I can see from host that devi-hirun is running . The devi-hirun
with
arguments are same as it is if i boot from Harddisk.
Can anybody point out any mistake.










\