I have a HP Pavilion zt1135 laptop that has a video chipset incompatible
with QNX 6.x.x. It locks up during installation on 1st attempt to go into
photon. That would be OK since I don’t need photon for what I want to do,
and the base system is installed at that point. However, ‘cl-installer’
does not install any development tools from the CD (no gcc, qcc, etc). How
do I install the dev tools and configure the network??? I am using the
laptop as a self hosted system. BTW, why is the installation so focused on
photon? There must be a way to do a console only install…
Bob, can you please outline the steps you took in using cl-installer to
perform your installation? And if possible, post the log file
(/etc/system/package/session.log) from your cl-installer session. Thanks.
Jerry Chappell
“Bob Borchardt” <r.p.borchardt@larc.nasa.gov> wrote in message
news:ar85q5$3jb$1@inn.qnx.com…
I have a HP Pavilion zt1135 laptop that has a video chipset incompatible
with QNX 6.x.x. It locks up during installation on 1st attempt to go into
photon. That would be OK since I don’t need photon for what I want to do,
and the base system is installed at that point. However, ‘cl-installer’
does not install any development tools from the CD (no gcc, qcc, etc).
How
do I install the dev tools and configure the network??? I am using the
laptop as a self hosted system. BTW, why is the installation so focused
on
photon? There must be a way to do a console only install…
This is my install procedure, followed by the session log in
‘/etc/system/package/session.log’.
=> Partitioned HD for XP, QNX, RedHat 7.2 (XP, RedHat 7.2 loaded & working,
using grub bootloader)
=> Inserted QNX 6.2.0 CD and booted from it
=> F3 (Use all of QNX partition)
=> F1
=> F1
=> F1
=> F2 (Delete existing files in QNX partition)
=> F1 (Use existing boot loader)
=> F3 (Do not change active partition)
=> Initial installation completed then removed CD when prompted
=> Rebooted, QNX installation continued then locked up on the ‘New video
card detected’ window
=> Forced power off then on cycle
=> Rebooted QNX (Used spacebar for boot options)
=> F1 (Safe modes)
=> F3 (Don’t start photon)
=> Enter (Continue boot process)
=> login as ‘root’
=> Entered: touch /etc/system/config/nophoton (don’t boot into photon)
=> Inserted CD
=> Entered: cl-installer
=> Entered: i (install)
=> Entered: 1 (for /fs/cd0/repository)
=> Entered: 2 (for Neutrino x86)
=> Entered: i (install x86)
=> Accepted the license agreements
=> Selected to keep the spill
=> Waited for a long time for installation of packages
=> Entered: q (install finished)
=> Removed CD and rebooted
/etc/system/package/session.log
11:45:34 STATUS: Log file started on 2002-11-18
11:45:34 STATUS: Session started by the Command-Line Package Installer 1.00
(qnx6) using libpackage 2.2
11:45:36 STATUS: Loaded installed QPF file (/etc/system/package/packages)
11:45:37 STATUS: Opening installed repository… (“User Repository” at
/pkgs/repository)
11:45:37 STATUS: Installed repository has been parsed (0 packages)
11:45:37 STATUS: Opening installed repository… (“Core Repository” at
/pkgs/base)
11:45:44 STATUS: Saving installed QRM to
/etc/system/package/installed/b62ffa80e250fbd6e661a1948c473789.qrm (“Core
Repository” at /pkgs/base)
11:45:45 STATUS: Installed repository has been parsed (22 packages)
11:45:54 STATUS: Loading remote QRM (/fs/cd0/repository)
11:46:49 STATUS: Opening repository… (/fs/cd0/repository)
11:46:55 STATUS: Created temporary directory (/tmp/plib241674)
11:48:51 WARNING: Bundle references an unknown child package
[qnxinstall_r-1.0-x86-qnx] (QNX Momentics NC 6.2.0 (Neutrino tool) targeting
x86)
11:48:51 WARNING: Bundle references an unknown child package
[qnxinstall_r-1.0-qnx] (QNX Momentics NC 6.2.0 (Neutrino tool) targeting
x86)
11:48:51 STATUS: Repository has been opened (137 packages)
11:48:51 STATUS: Saving remote QRM to
/etc/system/package/sources/qrm241674.qrm (/fs/cd0/repository)
11:49:32 STATUS: Dependency check started…
11:49:33 STATUS: Dependency check completed (fully satisfied)
11:49:33 STATUS: Dependency check started…
11:49:33 STATUS: Dependency check completed (fully satisfied)
11:49:33 STATUS: Actions being performed…
11:49:52 STATUS: Performing preliminary actions in this repository…
(/fs/cd0/repository)
11:49:52 STATUS: Install package MANIFEST
[/fs/cd0/repository/audio-ddk-6.2.0-qnx.qpk] (Audio DDK 6.2.0)
11:49:58 STATUS: Install package MANIFEST
[/fs/cd0/repository/b-os-6.2.0-x86-qnx.qpk] (QNX Momentics NC 6.2.0
(Neutrino tool) targeting x86)
11:50:00 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-2.10.1-qnx.qpk] (Binutils 2.10.1)
11:50:01 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-2.10.1-x86-qnx.qpk] (Binutils 2.10.1 targeting x86)
11:50:02 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-dev-2.10.1-qnx.qpk] (Binutils Development 2.10.1)
11:50:03 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-dev_x86-2.10.1-qnx.qpk] (Binutils Development
2.10.1 (Neutrino tool) targeting x86)
11:50:04 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-dev_x86-2.10.1-x86-qnx.qpk] (Binutils Development
2.10.1 (Neutrino tool) targeting x86)
11:50:06 STATUS: Install package MANIFEST
[/fs/cd0/repository/bison-1.28-qnx.qpk] (Bison 1.28)
11:50:07 STATUS: Install package MANIFEST
[/fs/cd0/repository/bison-1.28-x86-qnx.qpk] (Bison 1.28 targeting x86)
11:50:08 STATUS: Install package MANIFEST
[/fs/cd0/repository/char-ddk-6.2.0-qnx.qpk] (Character (Serial) DDK 6.2.0)
11:50:09 STATUS: Install package MANIFEST
[/fs/cd0/repository/common-ddk-6.2.0-qnx.qpk] (Common DDK Files 6.2.0)
11:50:10 STATUS: Install package MANIFEST
[/fs/cd0/repository/cpp_compat-slib-1.0-qnx.qpk] (6.1.0 CPP Compatibility
Libs shared libraries 1.0)
11:50:11 STATUS: Install package MANIFEST
[/fs/cd0/repository/cpp_compat-slib-1.0-x86-qnx.qpk] (6.1.0 CPP
Compatibility Libs shared libraries 1.0 targeting x86)
11:50:15 STATUS: Install package MANIFEST
[/fs/cd0/repository/flash-dev-4.0-qnx.qpk] (Flashplayer Development 4.0
Experimental)
11:50:16 STATUS: Install package MANIFEST
[/fs/cd0/repository/flash-dev_x86-4.0-qnx.qpk] (Flashplayer Development 4.0
Experimental targeting x86)
11:50:17 STATUS: Install package MANIFEST
[/fs/cd0/repository/flex-2.5.4-qnx.qpk] (Flex 2.5.4)
11:50:18 STATUS: Install package MANIFEST
[/fs/cd0/repository/flex-2.5.4-x86-qnx.qpk] (Flex 2.5.4 targeting x86)
11:50:19 STATUS: Install package MANIFEST
[/fs/cd0/repository/gcc-2.95.3-qnx.qpk] (GCC 2.95.3)
11:50:20 STATUS: Install package MANIFEST
[/fs/cd0/repository/gcc-dev_x86-2.95.3-qnx.qpk] (GCC Development 2.95.3
(Neutrino tool) targeting x86)
11:50:22 STATUS: Install package MANIFEST
[/fs/cd0/repository/gcc-dev_x86-2.95.3-x86-qnx.qpk] (GCC Development 2.95.3
(Neutrino tool) targeting x86)
11:50:23 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-5.0-qnx.qpk] (GDB 5.0)
11:50:24 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-5.0-x86-qnx.qpk] (GDB 5.0 targeting x86)
11:50:25 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-dev_x86-5.0-qnx.qpk] (GDB Development 5.0 (Neutrino
tool) targeting x86)
11:50:26 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-dev_x86-5.0-x86-qnx.qpk] (GDB Development 5.0
(Neutrino tool) targeting x86)
11:50:27 STATUS: Install package MANIFEST
[/fs/cd0/repository/gfx-ddk-6.2.0-qnx.qpk] (Graphics DDK 6.2.0)
11:50:29 STATUS: Install package MANIFEST
[/fs/cd0/repository/gplusplus-slib-2.10-qnx.qpk] (GNU C++ shared libraries
2.10 Experimental)
11:50:30 STATUS: Install package MANIFEST
[/fs/cd0/repository/gplusplus-slib-2.10-x86-qnx.qpk] (GNU C++ shared
libraries 2.10 Experimental targeting x86)
11:50:31 STATUS: Install package MANIFEST
[/fs/cd0/repository/input-ddk-6.2.0-qnx.qpk] (Input DDK 6.2.0)
11:50:33 STATUS: Install package MANIFEST
[/fs/cd0/repository/j9ive-1.5-qnx.qpk] (J9 Virtual Machine 1.5 Experimental
(Neutrino tool))
11:50:34 STATUS: Install package MANIFEST
[/fs/cd0/repository/j9ive-1.5-x86-qnx.qpk] (J9 Virtual Machine 1.5
Experimental (Neutrino tool))
11:50:35 STATUS: Install package MANIFEST
[/fs/cd0/repository/j9ive-dev-1.5-qnx.qpk] (J9 Virtual Machine Development
1.5 Experimental (Neutrino tool))
11:50:37 STATUS: Install package MANIFEST
[/fs/cd0/repository/libstdc-dev-2.2.10-public.qpk] (GNU C++ Library
Development 2.2.10)
11:50:38 STATUS: Install package MANIFEST
[/fs/cd0/repository/libstdc-dev_x86-2.2.10-public.qpk] (GNU C++ Library
Development 2.2.10 targeting x86)
11:50:39 STATUS: Install package MANIFEST
[/fs/cd0/repository/make-3.79.1-qnx.qpk] (Make 3.79.1)
11:50:40 STATUS: Install package MANIFEST
[/fs/cd0/repository/make-3.79.1-x86-qnx.qpk] (Make 3.79.1 targeting x86)
11:50:41 STATUS: Install package MANIFEST
[/fs/cd0/repository/mozilla-0.9.8-bld4-qnx.qpk] (Mozilla 0.9.8 Beta build 4)
11:50:43 STATUS: Install package MANIFEST
[/fs/cd0/repository/mozilla-0.9.8-bld4-x86-qnx.qpk] (Mozilla 0.9.8 Beta
build 4 targeting x86)
11:50:44 STATUS: Install package MANIFEST
[/fs/cd0/repository/mozilla-Static-0.9.8-bld4-qnx.qpk] (Mozilla Static 0.9.8
Beta build 4)
11:50:46 STATUS: Install package MANIFEST
[/fs/cd0/repository/mozilla-Static-0.9.8-bld4-x86-qnx.qpk] (Mozilla Static
0.9.8 Beta build 4 targeting x86)
11:50:47 STATUS: Install package MANIFEST
[/fs/cd0/repository/nasm-0.98-qnx.qpk] (The Netwide Assembler 0.98)
11:50:48 STATUS: Install package MANIFEST
[/fs/cd0/repository/nasm-0.98-x86-qnx.qpk] (The Netwide Assembler 0.98
targeting x86)
11:50:49 STATUS: Install package MANIFEST
[/fs/cd0/repository/network-ddk-6.2.0-qnx.qpk] (Network DDK 6.2.0)
11:50:50 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-dev-2.1.3-qnx.qpk] (QNX Neutrino OS Development
2.1.3)
11:50:52 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-dev_x86-2.1.3-qnx.qpk] (QNX Neutrino OS Development
2.1.3 targeting x86)
11:50:53 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-devdoc-2.1.3-qnx.qpk] (QNX Neutrino OS Development
Documentation 2.1.3)
11:50:56 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-devtools-2.1.3-qnx.qpk] (QNX Neutrino OS Development
Tools 2.1.3)
11:50:57 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-devtools-2.1.3-x86-qnx.qpk] (QNX Neutrino OS
Development Tools 2.1.3 targeting x86)
11:50:58 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-devtools_x86-2.1.3-qnx.qpk] (QNX Neutrino OS
Development Tools 2.1.3 targeting x86)
11:50:59 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-slib-2.1.1-qnx.qpk] (OS shared libraries 2.1.1
Experimental release 2)
11:51:00 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-slib-2.1.1-x86-qnx.qpk] (OS shared libraries 2.1.1
Experimental release 2 targeting x86)
11:51:15 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-citrix-2.0.3-qnx.qpk] (Citrix ICA Client 3.0)
11:51:16 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-citrix-2.0.3-x86-qnx.qpk] (Citrix ICA Client 3.0
targeting x86)
11:51:17 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-conn-2.0.3-qnx.qpk] (QNX Photon Remote Display
Utilities 2.0.3)
11:51:18 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-conn-2.0.3-x86-qnx.qpk] (QNX Photon Remote Display
Utilities 2.0.3 targeting x86)
11:51:20 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-cpim-2.0.3-qnx.qpk] (QNX Photon Chinese Input Method
2.0.3)
11:51:21 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-cpim-2.0.3-x86-qnx.qpk] (QNX Photon Chinese Input
Method 2.0.3 targeting x86)
11:51:22 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-dev-2.0.3-qnx.qpk] (QNX Photon Development 2.0.3)
11:51:23 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-dev_x86-2.0.3-qnx.qpk] (QNX Photon Development 2.0.3
targeting x86)
11:51:25 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-devdoc-2.0.3-qnx.qpk] (QNX Photon Development
Documentation 2.0.3)
11:51:27 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-devtools-2.0.3-qnx.qpk] (QNX Photon Development Tools
2.0.3)
11:51:28 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-devtools-2.0.3-x86-qnx.qpk] (QNX Photon devtools
2.0.3 targeting x86)
11:51:30 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-games-2.0.3-qnx.qpk] (QNX Photon Card Games and
Puzzles 2.0.3)
11:51:31 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-games-2.0.3-x86-qnx.qpk] (QNX Photon Card Games and
Puzzles 2.0.3 targeting x86)
11:51:32 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-kpim-2.0.3-qnx.qpk] (QNX Photon Korean Input Method
2.0.3)
11:51:33 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-vpim-2.0.3-qnx.qpk] (QNX Photon Japanese Input Method
2.0.3)
11:51:35 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-vpim-2.0.3-x86-qnx.qpk] (QNX Photon Japanese Input
Method 2.0.3 targeting x86)
11:51:36 STATUS: Install package MANIFEST
[/fs/cd0/repository/printer-ddk-6.2.0-qnx.qpk] (Printer DDK 6.2.0)
11:51:37 STATUS: Install package MANIFEST
[/fs/cd0/repository/usb-ddk-6.2.0-qnx.qpk] (USB DDK 6.2.0)
11:51:38 STATUS: Preliminary actions complete for this repository
11:51:38 STATUS: Generating required QPF files
11:51:38 STATUS: Saving installed QRM to
/etc/system/package/installed/b19f8bc4c5fff2f0ea12229dffe594ab.qrm (“User
Repository” at /pkgs/repository)
11:51:39 STATUS: Saving installed QRM to
/etc/system/package/installed/b62ffa80e250fbd6e661a1948c473789.qrm (“Core
Repository” at /pkgs/base)
11:51:39 STATUS: Saved proposed QPF file
(/etc/system/package/packages.proposed)
11:51:39 STATUS: Opening QPF (/etc/system/package/packages)
11:51:39 STATUS: Parsing QPF file(s)
11:51:41 STATUS: Parsing QPM file(s)
11:51:43 STATUS: Opening QPF (/etc/system/package/packages.proposed)
11:51:43 STATUS: Parsing QPF file(s)
11:51:49 STATUS: Parsing QPM file(s)
11:51:56 STATUS: Comparing QPF files (/etc/system/package/packages vs.
/etc/system/package/packages.proposed)
11:51:56 STATUS: Comparing individual files
11:51:56 WARNING: Bad or missing CHECKSUMS file
(/pkgs/repository/qnx/os/core-2.1.3/x86/CHECKSUMS)
11:51:56 STATUS: Spilled file detected for /x86/usr/bin/strings (at
/x86/usr/bin/strings)
11:52:09 STATUS: Locating required packages
11:52:09 STATUS: Package summary complete (0, 60)
11:52:40 STATUS: Created temporary directory (/tmp/pliba41674)
12:05:52 STATUS: Committing files to disk
13:56:51 STATUS: Applying unions and symlinks
13:57:01 WARNING: Unresolvable symlink (/usr/bin/ntox86-size–>size)
13:57:01 WARNING: Unresolvable symlink (/usr/bin/ntox86-objdump–>objdump)
13:57:01 WARNING: Unresolvable symlink (/usr/bin/ntox86-ar–>ar)
13:57:02 WARNING: Unresolvable symlink (/usr/bin/ntox86-ranlib–>ranlib)
13:57:02 WARNING: Unresolvable symlink (/usr/bin/ntox86-strings–>strings)
13:57:02 WARNING: Unresolvable symlink (/usr/bin/ntox86-objcopy–>objcopy)
13:57:02 WARNING: Unresolvable symlink (/usr/bin/ntox86-strip–>strip)
13:57:02 WARNING: Unresolvable symlink
(/usr/bin/ntox86-addr2line–>addr2line)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-nm–>nm)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-c++filt–>c++filt)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-readelf–>readelf)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-gprof–>gprof)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-ld–>ld)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-gasp–>gasp)
13:57:04 WARNING: Unresolvable symlink
(/usr/bin/cpp–>…/lib/gcc-lib/ntox86/2.95.3/cpp0)
13:57:05 STATUS: Saved proposed QPF as current
(/etc/system/package/packages)
13:57:05 STATUS: Post commit for kept original files
13:57:05 STATUS: Script: Executes a post-activate non-blocking script
(rep://qnx/binu/dev_x86-2.10.1/x86/script/binu_links-script install) on a
qnx6 machine. (Binutils Development 2.10.1 (Neutrino tool) targeting x86)
13:57:06 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c
“/pkgs/repository/qnx/binu/dev_x86-2.10.1/x86/script/binu_links-script
install”) on a qnx6 machine.)
13:57:06 STATUS: Script: Executes a post-activate non-blocking script
(rep://qnx/gcc/dev_x86-2.95.3/x86/script/gcc_links-script install) on a qnx6
machine. (GCC Development 2.95.3 (Neutrino tool) targeting x86)
13:57:07 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c
“/pkgs/repository/qnx/gcc/dev_x86-2.95.3/x86/script/gcc_links-script
install”) on a qnx6 machine.)
13:57:07 STATUS: Script: Executes a post-activate non-blocking script
(rep://qnx/os/dev-2.1.3/script/dev-script install) on a qnx6 machine. (QNX
Neutrino OS Development 2.1.3)
13:57:08 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c “/pkgs/repository/qnx/os/dev-2.1.3/script/dev-script
install”) on a qnx6 machine.)
13:57:08 STATUS: Script: Executes a post-activate blocking script
(/usr/photon/bin/font_install) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:08 STATUS: Script executed due to this package (QNX Photon Chinese
Input Method 2.0.3)
13:57:12 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:12 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:12 STATUS: Script: Executes a post-activate blocking script
(/usr/photon/bin/font_install) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:12 STATUS: Script executed due to this package (QNX Photon Chinese
Input Method 2.0.3)
13:57:16 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:16 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:16 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:16 STATUS: Script executed due to this package (QNX Photon Chinese
Input Method 2.0.3 targeting x86)
13:57:19 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:19 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:19 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:19 STATUS: Script executed due to this package (QNX Photon Chinese
Input Method 2.0.3 targeting x86)
13:57:23 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:23 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:23 STATUS: Script: Executes a post-activate non-blocking script
(/usr/photon/bin/doc_install) on a qnx6 machine, just after any package with
a “PackageType” of Documentation is activated. (QNX Photon 2.0.3)
13:57:23 STATUS: Script executed due to this package (QNX Photon
Development Documentation 2.0.3)
13:57:26 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c “/usr/photon/bin/doc_install”) on a qnx6 machine, just after
any package with a “PackageType” of Documentation is activated.)
13:57:26 STATUS: Script: Executes a post-activate non-blocking script
(/usr/photon/bin/doc_install) on a qnx6 machine, just after any package with
a “PackageType” of Documentation is activated. (QNX Photon 2.0.3)
13:57:26 STATUS: Script executed due to this package (QNX Photon
Development Documentation 2.0.3)
13:57:28 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c “/usr/photon/bin/doc_install”) on a qnx6 machine, just after
any package with a “PackageType” of Documentation is activated.)
13:57:28 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:28 STATUS: Script executed due to this package (QNX Photon Korean
Input Method 2.0.3)
13:57:32 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:32 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:32 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:32 STATUS: Script executed due to this package (QNX Photon Korean
Input Method 2.0.3)
13:57:36 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:36 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:36 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:36 STATUS: Script executed due to this package (QNX Photon Japanese
Input Method 2.0.3)
13:57:39 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:39 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:39 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:39 STATUS: Script executed due to this package (QNX Photon Japanese
Input Method 2.0.3)
13:57:43 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:43 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:43 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:43 STATUS: Script executed due to this package (QNX Photon Japanese
Input Method 2.0.3 targeting x86)
13:57:47 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:47 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:47 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:47 STATUS: Script executed due to this package (QNX Photon Japanese
Input Method 2.0.3 targeting x86)
13:57:50 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:50 STATUS: Script complete (Executes a post-activate blocking script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:50 STATUS: Action for Audio DDK 6.2.0 (has been successfully
installed)
13:57:50 STATUS: Action for QNX Momentics NC 6.2.0 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:50 STATUS: Action for Binutils 2.10.1 (has been successfully
installed)
13:57:50 STATUS: Action for Binutils 2.10.1 targeting x86 (has been
successfully installed)
13:57:51 STATUS: Action for Binutils Development 2.10.1 (has been
successfully installed)
13:57:51 STATUS: Action for Binutils Development 2.10.1 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for Binutils Development 2.10.1 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for Bison 1.28 (has been successfully installed)
13:57:51 STATUS: Action for Bison 1.28 targeting x86 (has been successfully
installed)
13:57:51 STATUS: Action for Character (Serial) DDK 6.2.0 (has been
successfully installed)
13:57:51 STATUS: Action for Common DDK Files 6.2.0 (has been successfully
installed)
13:57:51 STATUS: Action for 6.1.0 CPP Compatibility Libs shared libraries
1.0 (has been successfully installed)
13:57:51 STATUS: Action for 6.1.0 CPP Compatibility Libs shared libraries
1.0 targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for
been successfully installed)
13:57:51 STATUS: Action for Flashplayer Development 4.0 Experimental
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for Flex 2.5.4 (has been successfully installed)
13:57:51 STATUS: Action for Flex 2.5.4 targeting x86 (has been successfully
installed)
13:57:51 STATUS: Action for GCC 2.95.3 (has been successfully installed)
13:57:51 STATUS: Action for GCC Development 2.95.3 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for GCC Development 2.95.3 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for GDB 5.0 (has been successfully installed)
13:57:51 STATUS: Action for GDB 5.0 targeting x86 (has been successfully
installed)
13:57:51 STATUS: Action for GDB Development 5.0 (Neutrino tool) targeting
x86 (has been successfully installed)
13:57:51 STATUS: Action for GDB Development 5.0 (Neutrino tool) targeting
x86 (has been successfully installed)
13:57:51 STATUS: Action for Graphics DDK 6.2.0 (has been successfully
installed)
13:57:51 STATUS: Action for GNU C++ shared libraries 2.10 Experimental (has
been successfully installed)
13:57:51 STATUS: Action for GNU C++ shared libraries 2.10 Experimental
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for Input DDK 6.2.0 (has been successfully
installed)
13:57:51 STATUS: Action for J9 Virtual Machine 1.5 Experimental (Neutrino
tool) (has been successfully installed)
13:57:51 STATUS: Action for J9 Virtual Machine 1.5 Experimental (Neutrino
tool) (has been successfully installed)
13:57:51 STATUS: Action for J9 Virtual Machine Development 1.5 Experimental
(Neutrino tool) (has been successfully installed)
13:57:51 STATUS: Action for GNU C++ Library Development 2.2.10 (has been
successfully installed)
13:57:51 STATUS: Action for GNU C++ Library Development 2.2.10 targeting
x86 (has been successfully installed)
13:57:51 STATUS: Action for Make 3.79.1 (has been successfully installed)
13:57:52 STATUS: Action for Make 3.79.1 targeting x86 (has been
successfully installed)
13:57:52 STATUS: Action for Mozilla 0.9.8 Beta build 4 (has been
successfully installed)
13:57:52 STATUS: Action for Mozilla 0.9.8 Beta build 4 targeting x86 (has
been successfully installed)
13:57:52 STATUS: Action for Mozilla Static 0.9.8 Beta build 4 (has been
successfully installed)
13:57:52 STATUS: Action for Mozilla Static 0.9.8 Beta build 4 targeting x86
(has been successfully installed)
13:57:52 STATUS: Action for The Netwide Assembler 0.98 (has been
successfully installed)
13:57:52 STATUS: Action for The Netwide Assembler 0.98 targeting x86 (has
been successfully installed)
13:57:52 STATUS: Action for Network DDK 6.2.0 (has been successfully
installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development 2.1.3 (has been
successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development 2.1.3 targeting x86
(has been successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development Documentation 2.1.3
(has been successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development Tools 2.1.3 (has
been successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development Tools 2.1.3
targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development Tools 2.1.3
targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for OS shared libraries 2.1.1 Experimental release
2 (has been successfully installed)
13:57:52 STATUS: Action for OS shared libraries 2.1.1 Experimental release
2 targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for Citrix ICA Client 3.0 (has been successfully
installed)
13:57:52 STATUS: Action for Citrix ICA Client 3.0 targeting x86 (has been
successfully installed)
13:57:52 STATUS: Action for QNX Photon Remote Display Utilities 2.0.3 (has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Remote Display Utilities 2.0.3
targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for QNX Photon Chinese Input Method 2.0.3 (has been
successfully installed)
13:57:52 STATUS: Action for QNX Photon Chinese Input Method 2.0.3 targeting
x86 (has been successfully installed)
13:57:52 STATUS: Action for QNX Photon Development 2.0.3 (has been
successfully installed)
13:57:52 STATUS: Action for QNX Photon Development 2.0.3 targeting x86 (has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Development Documentation 2.0.3 (has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Development Tools 2.0.3 (has been
successfully installed)
13:57:52 STATUS: Action for QNX Photon devtools 2.0.3 targeting x86 (has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Card Games and Puzzles 2.0.3 (has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Card Games and Puzzles 2.0.3
targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for QNX Photon Korean Input Method 2.0.3 (has been
successfully installed)
13:57:53 STATUS: Action for QNX Photon Japanese Input Method 2.0.3 (has
been successfully installed)
13:57:53 STATUS: Action for QNX Photon Japanese Input Method 2.0.3
targeting x86 (has been successfully installed)
13:57:53 STATUS: Action for Printer DDK 6.2.0 (has been successfully
installed)
13:57:53 STATUS: Action for USB DDK 6.2.0 (has been successfully installed)
13:57:53 STATUS: Updating the Launch menu (launchmenu_notify)
13:57:55 STATUS: Saving installed QRM to
/etc/system/package/installed/b19f8bc4c5fff2f0ea12229dffe594ab.qrm (“User
Repository” at /pkgs/repository)
13:57:55 STATUS: Actions completed
14:00:33 STATUS: Removed temporary directory (/tmp/plib241674)
14:00:33 STATUS: Removed temporary directory (/tmp/pliba41674)
14:00:33 STATUS: Session closed
14:00:33 STATUS: Log file closed on 2002-11-18
“Jerry Chappell” <jchappell@qnx.com> wrote in message
news:arb11f$g2s$1@nntp.qnx.com…
Bob, can you please outline the steps you took in using cl-installer to
perform your installation? And if possible, post the log file
(/etc/system/package/session.log) from your cl-installer session. Thanks.Jerry Chappell
“Bob Borchardt” <> r.p.borchardt@larc.nasa.gov> > wrote in message
news:ar85q5$3jb$> 1@inn.qnx.com> …
I have a HP Pavilion zt1135 laptop that has a video chipset incompatible
with QNX 6.x.x. It locks up during installation on 1st attempt to go
into
photon. That would be OK since I don’t need photon for what I want to
do,
and the base system is installed at that point. However, ‘cl-installer’
does not install any development tools from the CD (no gcc, qcc, etc).
How
do I install the dev tools and configure the network??? I am using the
laptop as a self hosted system. BTW, why is the installation so focused
on
photon? There must be a way to do a console only install…
\
Bob, can you try pkgctl:
/usr/sbin/pkgctl /usr/bin/gcc
/usr/sbin/pkgctl /usr/bin/qcc
/usr/sbin/pkgctl /usr/bin/cpp
/usr/sbin/pkgctl /usr/bin/ntox86-size
/usr/sbin/pkgctl /usr/bin/ntox86-objdump
And you may want to post back to the newsgroup, as I’m running out of ideas.
Maybe someone else will have some insight.
Jerry
-----Original Message-----
From: Robert P Borchardt [mailto:> r.p.borchardt@larc.nasa.gov> ]
Sent: Monday, November 18, 2002 2:45 PM
To: Jerry Chappell
Subject: RE: How do i perform console only install of 6.2?
Thanks for the fast response. No, gcc, qcc, etc are not there. Here are
some ‘ls -al’ of /usr/bin:ls -al /usr/bin/g*
-rwxrwxrwx 1 root root 0 Nov 18 14:31 /usr/bin/gasp
-rwxrwxr-x 1 root root 154240 May 11 2002 /usr/bin/gawk
lrwxrwxrwx 1 root root 12 Nov 18 14:31 /usr/bin/gdb -
./ntox86-gdb
-rwxrwxr-x 1 root root 17768 May 03 2002 /usr/bin/getconf
-rwxrwxrwx 1 root root 0 Nov 18 14:31 /usr/bin/gprof
-rwxrwxr-x 1 root root 35248 May 03 2002 /usr/bin/grepls -al /usr/bin/q*
-rwxrwxrwx 1 root root 0 Nov 18 14:31 /usr/bin/qcc
-rwxrwxr-x 1 root root 19360 May 03 2002 /usr/bin/qcp
-rwxrwxr-x 1 root root 65840 May 03 2002 /usr/bin/qed
-rwxrwxr-x 1 root root 33220 May 03 2002 /usr/bin/qtalkAlso, what are these warnings in the session.log:
11:48:51 WARNING: Bundle references an unknown child package
[qnxinstall_r-1.0-x86-qnx] (QNX Momentics NC 6.2.0 (Neutrino
tool) targeting
x86)
11:48:51 WARNING: Bundle references an unknown child package
[qnxinstall_r-1.0-qnx] (QNX Momentics NC 6.2.0 (Neutrino tool) targeting
x86)and
13:57:01 WARNING: Unresolvable symlink (/usr/bin/ntox86-size–>size)
13:57:01 WARNING: Unresolvable symlink
(/usr/bin/ntox86-objdump–>objdump)
13:57:01 WARNING: Unresolvable symlink (/usr/bin/ntox86-ar–>ar)
13:57:02 WARNING: Unresolvable symlink (/usr/bin/ntox86-ranlib–>ranlib)
13:57:02 WARNING: Unresolvable symlink
(/usr/bin/ntox86-strings–>strings)
13:57:02 WARNING: Unresolvable symlink
(/usr/bin/ntox86-objcopy–>objcopy)
13:57:02 WARNING: Unresolvable symlink (/usr/bin/ntox86-strip–>strip)
13:57:02 WARNING: Unresolvable symlink
(/usr/bin/ntox86-addr2line–>addr2line)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-nm–>nm)
13:57:03 WARNING: Unresolvable symlink
(/usr/bin/ntox86-c++filt–>c++filt)
13:57:03 WARNING: Unresolvable symlink
(/usr/bin/ntox86-readelf–>readelf)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-gprof–>gprof)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-ld–>ld)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-gasp–>gasp)
13:57:04 WARNING: Unresolvable symlink
(/usr/bin/cpp–>…/lib/gcc-lib/ntox86/2.95.3/cpp0)-----Original Message-----
From: Jerry Chappell [mailto:> jchappell@qnx.com> ]
Sent: Monday, November 18, 2002 2:24 PM
To: Robert P Borchardt
Subject: RE: How do i perform console only install of 6.2?
Bob, I don’t see the problem. In the session.log, you can see:11:50:19 STATUS: Install package MANIFEST
[/fs/cd0/repository/gcc-2.95.3-qnx.qpk] (GCC 2.95.3)
11:50:20 STATUS: Install package MANIFEST
[/fs/cd0/repository/gcc-dev_x86-2.95.3-qnx.qpk] (GCC Development 2.95.3
(Neutrino tool) targeting x86)
11:50:22 STATUS: Install package MANIFEST
[/fs/cd0/repository/gcc-dev_x86-2.95.3-x86-qnx.qpk] (GCC
Development 2.95.3
(Neutrino tool) targeting x86)
11:50:23 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-5.0-qnx.qpk] (GDB 5.0)
11:50:24 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-5.0-x86-qnx.qpk] (GDB 5.0 targeting x86)
11:50:25 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-dev_x86-5.0-qnx.qpk] (GDB Development 5.0
(Neutrino
tool) targeting x86)
11:50:26 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-dev_x86-5.0-x86-qnx.qpk] (GDB Development 5.0
(Neutrino tool) targeting x86)…
13:57:51 STATUS: Action for GCC 2.95.3 (has been successfully
installed)
13:57:51 STATUS: Action for GCC Development 2.95.3 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for GCC Development 2.95.3 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for GDB 5.0 (has been successfully installed)
13:57:51 STATUS: Action for GDB 5.0 targeting x86 (has been
successfully
installed)
13:57:51 STATUS: Action for GDB Development 5.0 (Neutrino
tool) targeting
x86 (has been successfully installed)
13:57:51 STATUS: Action for GDB Development 5.0 (Neutrino
tool) targeting
x86 (has been successfully installed)
So these packages are installed, just like they would have been
using the
Photon ‘qnxinstall’ application. In fact, it uses the same library, so
there’s no difference between the two, except the user interface.Have you checked /usr/bin to see if the applications are actually there
(gcc, qcc, and gdb)?
You could also do a pkgctl command to see if the files installed and/or
spilled: /usr/sbin/pkgctl /usr/bin/gccJerry Chappell
\
“Robert Borchardt” <r.p.borchardt@larc.nasa.gov> wrote in message
news:arbdru$nak$1@inn.qnx.com…
This is my install procedure, followed by the session log in
‘/etc/system/package/session.log’.=> Partitioned HD for XP, QNX, RedHat 7.2 (XP, RedHat 7.2 loaded &
working,
using grub bootloader)
=> Inserted QNX 6.2.0 CD and booted from it
=> F3 (Use all of QNX partition)
=> F1
=> F1
=> F1
=> F2 (Delete existing files in QNX partition)
=> F1 (Use existing boot loader)
=> F3 (Do not change active partition)
=> Initial installation completed then removed CD when prompted
=> Rebooted, QNX installation continued then locked up on the ‘New video
card detected’ window
=> Forced power off then on cycle
=> Rebooted QNX (Used spacebar for boot options)
=> F1 (Safe modes)
=> F3 (Don’t start photon)
=> Enter (Continue boot process)
=> login as ‘root’
=> Entered: touch /etc/system/config/nophoton (don’t boot into photon)
=> Inserted CD
=> Entered: cl-installer
=> Entered: i (install)
=> Entered: 1 (for /fs/cd0/repository)
=> Entered: 2 (for Neutrino x86)
=> Entered: i (install x86)
=> Accepted the license agreements
=> Selected to keep the spill
=> Waited for a long time for installation of packages
=> Entered: q (install finished)
=> Removed CD and rebooted
/etc/system/package/session.log
11:45:34 STATUS: Log file started on 2002-11-18
11:45:34 STATUS: Session started by the Command-Line Package Installer
1.00
(qnx6) using libpackage 2.2
11:45:36 STATUS: Loaded installed QPF file (/etc/system/package/packages)
11:45:37 STATUS: Opening installed repository… (“User Repository” at
/pkgs/repository)
11:45:37 STATUS: Installed repository has been parsed (0 packages)
11:45:37 STATUS: Opening installed repository… (“Core Repository” at
/pkgs/base)
11:45:44 STATUS: Saving install
/etc/system/package/installed/b62ffa80e250fbd6e661a1948c473789.qrm (“Core
Repository” at /pkgs/base)
11:45:45 STATUS: Installed repository has been parsed (22 packages)
11:45:54 STATUS: Loading remote QRM (/fs/cd0/repository)
11:46:49 STATUS: Opening repository… (/fs/cd0/repository)
11:46:55 STATUS: Created temporary directory (/tmp/plib241674)
11:48:51 WARNING: Bundle references an unknown child package
[qnxinstall_r-1.0-x86-qnx] (QNX Momentics NC 6.2.0 (Neutrino tool)
targeting
x86)
11:48:51 WARNING: Bundle references an unknown child package
[qnxinstall_r-1.0-qnx] (QNX Momentics NC 6.2.0 (Neutrino tool) targeting
x86)
11:48:51 STATUS: Repository has been opened (137 packages)
11:48:51 STATUS: Saving remote QRM to
/etc/system/package/sources/qrm241674.qrm (/fs/cd0/repository)
11:49:32 STATUS: Dependency check started…
11:49:33 STATUS: Dependency check completed (fully satisfied)
11:49:33 STATUS: Dependency check started…
11:49:33 STATUS: Dependency check completed (fully satisfied)
11:49:33 STATUS: Actions being performed…
11:49:52 STATUS: Performing preliminary actions in this repository…
(/fs/cd0/repository)
11:49:52 STATUS: Install package MANIFEST
[/fs/cd0/repository/audio-ddk-6.2.0-qnx.qpk] (Audio DDK 6.2.0)
11:49:58 STATUS: Install package MANIFEST
[/fs/cd0/repository/b-os-6.2.0-x86-qnx.qpk] (QNX Momentics NC 6.2.0
(Neutrino tool) targeting x86)
11:50:00 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-2.10.1-qnx.qpk] (Binutils 2.10.1)
11:50:01 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-2.10.1-x86-qnx.qpk] (Binutils 2.10.1 targeting
x86)
11:50:02 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-dev-2.10.1-qnx.qpk] (Binutils Development 2.10.1)
11:50:03 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-dev_x86-2.10.1-qnx.qpk] (Binutils Development
2.10.1 (Neutrino tool) targeting x86)
11:50:04 STATUS: Install package MANIFEST
[/fs/cd0/repository/binu-dev_x86-2.10.1-x86-qnx.qpk] (Binutils Development
2.10.1 (Neutrino tool) targeting x86)
11:50:06 STATUS: Install package MANIFEST
[/fs/cd0/repository/bison-1.28-qnx.qpk] (Bison 1.28)
11:50:07 STATUS: Install package MANIFEST
[/fs/cd0/repository/bison-1.28-x86-qnx.qpk] (Bison 1.28 targeting x86)
11:50:08 STATUS: Install package MANIFEST
[/fs/cd0/repository/char-ddk-6.2.0-qnx.qpk] (Character (Serial) DDK 6.2.0)
11:50:09 STATUS: Install package MANIFEST
[/fs/cd0/repository/common-ddk-6.2.0-qnx.qpk] (Common DDK Files 6.2.0)
11:50:10 STATUS: Install package MANIFEST
[/fs/cd0/repository/cpp_compat-slib-1.0-qnx.qpk] (6.1.0 CPP Compatibility
Libs shared libraries 1.0)
11:50:11 STATUS: Install package MANIFEST
[/fs/cd0/repository/cpp_compat-slib-1.0-x86-qnx.qpk] (6.1.0 CPP
Compatibility Libs shared libraries 1.0 targeting x86)
11:50:15 STATUS: Install package MANIFEST
[/fs/cd0/repository/flash-dev-4.0-qnx.qpk] (Flashplayer Development 4.0
Experimental)
11:50:16 STATUS: Install package MANIFEST
[/fs/cd0/repository/flash-dev_x86-4.0-qnx.qpk] (Flashplayer Development
4.0
Experimental targeting x86)
11:50:17 STATUS: Install package MANIFEST
[/fs/cd0/repository/flex-2.5.4-qnx.qpk] (Flex 2.5.4)
11:50:18 STATUS: Install package MANIFEST
[/fs/cd0/repository/flex-2.5.4-x86-qnx.qpk] (Flex 2.5.4 targeting x86)
11:50:19 STATUS: Install package MANIFEST
[/fs/cd0/repository/gcc-2.95.3-qnx.qpk] (GCC 2.95.3)
11:50:20 STATUS: Install package MANIFEST
[/fs/cd0/repository/gcc-dev_x86-2.95.3-qnx.qpk] (GCC Development 2.95.3
(Neutrino tool) targeting x86)
11:50:22 STATUS: Install package MANIFEST
[/fs/cd0/repository/gcc-dev_x86-2.95.3-x86-qnx.qpk] (GCC Development
2.95.3
(Neutrino tool) targeting x86)
11:50:23 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-5.0-qnx.qpk] (GDB 5.0)
11:50:24 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-5.0-x86-qnx.qpk] (GDB 5.0 targeting x86)
11:50:25 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-dev_x86-5.0-qnx.qpk] (GDB Development 5.0
(Neutrino
tool) targeting x86)
11:50:26 STATUS: Install package MANIFEST
[/fs/cd0/repository/gdb-dev_x86-5.0-x86-qnx.qpk] (GDB Development 5.0
(Neutrino tool) targeting x86)
11:50:27 STATUS: Install package MANIFEST
[/fs/cd0/repository/gfx-ddk-6.2.0-qnx.qpk] (Graphics DDK 6.2.0)
11:50:29 STATUS: Install package MANIFEST
[/fs/cd0/repository/gplusplus-slib-2.10-qnx.qpk] (GNU C++ shared libraries
2.10 Experimental)
11:50:30 STATUS: Install package MANIFEST
[/fs/cd0/repository/gplusplus-slib-2.10-x86-qnx.qpk] (GNU C++ shared
libraries 2.10 Experimental targeting x86)
11:50:31 STATUS: Install package MANIFEST
[/fs/cd0/repository/input-ddk-6.2.0-qnx.qpk] (Input DDK 6.2.0)
11:50:33 STATUS: Install package MANIFEST
[/fs/cd0/repository/j9ive-1.5-qnx.qpk] (J9 Virtual Machine 1.5
Experimental
(Neutrino tool))
11:50:34 STATUS: Install package MANIFEST
[/fs/cd0/repository/j9ive-1.5-x86-qnx.qpk] (J9 Virtual Machine 1.5
Experimental (Neutrino tool))
11:50:35 STATUS: Install package MANIFEST
[/fs/cd0/repository/j9ive-dev-1.5-qnx.qpk] (J9 Virtual Machine Development
1.5 Experimental (Neutrino tool))
11:50:37 STATUS: Install package MANIFEST
[/fs/cd0/repository/libstdc-dev-2.2.10-public.qpk] (GNU C++ Library
Development 2.2.10)
11:50:38 STATUS: Install package MANIFEST
[/fs/cd0/repository/libstdc-dev_x86-2.2.10-public.qpk] (GNU C++ Library
Development 2.2.10 targeting x86)
11:50:39 STATUS: Install package MANIFEST
[/fs/cd0/repository/make-3.79.1-qnx.qpk] (Make 3.79.1)
11:50:40 STATUS: Install package MANIFEST
[/fs/cd0/repository/make-3.79.1-x86-qnx.qpk] (Make 3.79.1 targeting x86)
11:50:41 STATUS: Install package MANIFEST
[/fs/cd0/repository/mozilla-0.9.8-bld4-qnx.qpk] (Mozilla 0.9.8 Beta build
4)
11:50:43 STATUS: Install package MANIFEST
[/fs/cd0/repository/mozilla-0.9.8-bld4-x86-qnx.qpk] (Mozilla 0.9.8 Beta
build 4 targeting x86)
11:50:44 STATUS: Install package MANIFEST
[/fs/cd0/repository/mozilla-Static-0.9.8-bld4-qnx.qpk] (Mozilla Static
0.9.8
Beta build 4)
11:50:46 STATUS: Install package MANIFEST
[/fs/cd0/repository/mozilla-Static-0.9.8-bld4-x86-qnx.qpk] (Mozilla Static
0.9.8 Beta build 4 targeting x86)
11:50:47 STATUS: Install package MANIFEST
[/fs/cd0/repository/nasm-0.98-qnx.qpk] (The Netwide Assembler 0.98)
11:50:48 STATUS: Install package MANIFEST
[/fs/cd0/repository/nasm-0.98-x86-qnx.qpk] (The Netwide Assembler 0.98
targeting x86)
11:50:49 STATUS: Install package MANIFEST
[/fs/cd0/repository/network-ddk-6.2.0-qnx.qpk] (Network DDK 6.2.0)
11:50:50 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-dev-2.1.3-qnx.qpk] (QNX Neutrino OS Development
2.1.3)
11:50:52 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-dev_x86-2.1.3-qnx.qpk] (QNX Neutrino OS Development
2.1.3 targeting x86)
11:50:53 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-devdoc-2.1.3-qnx.qpk] (QNX Neutrino OS Development
Documentation 2.1.3)
11:50:56 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-devtools-2.1.3-qnx.qpk] (QNX Neutrino OS
Development
Tools 2.1.3)
11:50:57 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-devtools-2.1.3-x86-qnx.qpk] (QNX Neutrino OS
Development Tools 2.1.3 targeting x86)
11:50:58 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-devtools_x86-2.1.3-qnx.qpk] (QNX Neutrino OS
Development Tools 2.1.3 targeting x86)
11:50:59 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-slib-2.1.1-qnx.qpk] (OS shared libraries 2.1.1
Experimental release 2)
11:51:00 STATUS: Install package MANIFEST
[/fs/cd0/repository/os-slib-2.1.1-x86-qnx.qpk] (OS shared libraries 2.1.1
Experimental release 2 targeting x86)
11:51:15 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-citrix-2.0.3-qnx.qpk] (Citrix ICA Client 3.0)
11:51:16 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-citrix-2.0.3-x86-qnx.qpk] (Citrix ICA Client 3.0
targeting x86)
11:51:17 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-conn-2.0.3-qnx.qpk] (QNX Photon Remote Display
Utilities 2.0.3)
11:51:18 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-conn-2.0.3-x86-qnx.qpk] (QNX Photon Remote Display
Utilities 2.0.3 targeting x86)
11:51:20 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-cpim-2.0.3-qnx.qpk] (QNX Photon Chinese Input
Method
2.0.3)
11:51:21 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-cpim-2.0.3-x86-qnx.qpk] (QNX Photon Chinese Input
Method 2.0.3 targeting x86)
11:51:22 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-dev-2.0.3-qnx.qpk] (QNX Photon Development 2.0.3)
11:51:23 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-dev_x86-2.0.3-qnx.qpk] (QNX Photon Development
2.0.3
targeting x86)
11:51:25 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-devdoc-2.0.3-qnx.qpk] (QNX Photon Development
Documentation 2.0.3)
11:51:27 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-devtools-2.0.3-qnx.qpk] (QNX Photon Development
Tools
2.0.3)
11:51:28 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-devtools-2.0.3-x86-qnx.qpk] (QNX Photon devtools
2.0.3 targeting x86)
11:51:30 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-games-2.0.3-qnx.qpk] (QNX Photon Card Games and
Puzzles 2.0.3)
11:51:31 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-games-2.0.3-x86-qnx.qpk] (QNX Photon Card Games and
Puzzles 2.0.3 targeting x86)
11:51:32 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-kpim-2.0.3-qnx.qpk] (QNX Photon Korean Input Method
2.0.3)
11:51:33 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-vpim-2.0.3-qnx.qpk] (QNX Photon Japanese Input
Method
2.0.3)
11:51:35 STATUS: Install package MANIFEST
[/fs/cd0/repository/ph-vpim-2.0.3-x86-qnx.qpk] (QNX Photon Japanese Input
Method 2.0.3 targeting x86)
11:51:36 STATUS: Install package MANIFEST
[/fs/cd0/repository/printer-ddk-6.2.0-qnx.qpk] (Printer DDK 6.2.0)
11:51:37 STATUS: Install package MANIFEST
[/fs/cd0/repository/usb-ddk-6.2.0-qnx.qpk] (USB DDK 6.2.0)
11:51:38 STATUS: Preliminary actions complete for this repository
11:51:38 STATUS: Generating required QPF files
11:51:38 STATUS: Saving installed QRM to
/etc/system/package/installed/b19f8bc4c5fff2f0ea12229dffe594ab.qrm (“User
Repository” at /pkgs/repository)
11:51:39 STATUS: Saving installed QRM to
/etc/system/package/installed/b62ffa80e250fbd6e661a1948c473789.qrm (“Core
Repository” at /pkgs/base)
11:51:39 STATUS: Saved proposed QPF file
(/etc/system/package/packages.proposed)
11:51:39 STATUS: Opening QPF (/etc/system/package/packages)
11:51:39 STATUS: Parsing QPF file(s)
11:51:41 STATUS: Parsing QPM file(s)
11:51:43 STATUS: Opening QPF (/etc/system/package/packages.proposed)
11:51:43 STATUS: Parsing QPF file(s)
11:51:49 STATUS: Parsing QPM file(s)
11:51:56 STATUS: Comparing QPF files (/etc/system/package/packages vs.
/etc/system/package/packages.proposed)
11:51:56 STATUS: Comparing individual files
11:51:56 WARNING: Bad or missing CHECKSUMS file
(/pkgs/repository/qnx/os/core-2.1.3/x86/CHECKSUMS)
11:51:56 STATUS: Spilled file detected for /x86/usr/bin/strings (at
/x86/usr/bin/strings)
11:52:09 STATUS: Locating required packages
11:52:09 STATUS: Package summary complete (0, 60)
11:52:40 STATUS: Created temporary directory (/tmp/pliba41674)
12:05:52 STATUS: Committing files to disk
13:56:51 STATUS: Applying unions and symlinks
13:57:01 WARNING: Unresolvable symlink (/usr/bin/ntox86-size–>size)
13:57:01 WARNING: Unresolvable symlink
(/usr/bin/ntox86-objdump–>objdump)
13:57:01 WARNING: Unresolvable symlink (/usr/bin/ntox86-ar–>ar)
13:57:02 WARNING: Unresolvable symlink (/usr/bin/ntox86-ranlib–>ranlib)
13:57:02 WARNING: Unresolvable symlink
(/usr/bin/ntox86-strings–>strings)
13:57:02 WARNING: Unresolvable symlink
(/usr/bin/ntox86-objcopy–>objcopy)
13:57:02 WARNING: Unresolvable symlink (/usr/bin/ntox86-strip–>strip)
13:57:02 WARNING: Unresolvable symlink
(/usr/bin/ntox86-addr2line–>addr2line)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-nm–>nm)
13:57:03 WARNING: Unresolvable symlink
(/usr/bin/ntox86-c++filt–>c++filt)
13:57:03 WARNING: Unresolvable symlink
(/usr/bin/ntox86-readelf–>readelf)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-gprof–>gprof)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-ld–>ld)
13:57:03 WARNING: Unresolvable symlink (/usr/bin/ntox86-gasp–>gasp)
13:57:04 WARNING: Unresolvable symlink
(/usr/bin/cpp–>…/lib/gcc-lib/ntox86/2.95.3/cpp0)
13:57:05 STATUS: Saved proposed QPF as current
(/etc/system/package/packages)
13:57:05 STATUS: Post commit for kept original files
13:57:05 STATUS: Script: Executes a post-activate non-blocking script
(rep://qnx/binu/dev_x86-2.10.1/x86/script/binu_links-script install) on a
qnx6 machine. (Binutils Development 2.10.1 (Neutrino tool) targeting x86)
13:57:06 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c
“/pkgs/repository/qnx/binu/dev_x86-2.10.1/x86/script/binu_links-script
install”) on a qnx6 machine.)
13:57:06 STATUS: Script: Executes a post-activate non-blocking script
(rep://qnx/gcc/dev_x86-2.95.3/x86/script/gcc_links-script install) on a
qnx6
machine. (GCC Development 2.95.3 (Neutrino tool) targeting x86)
13:57:07 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c
“/pkgs/repository/qnx/gcc/dev_x86-2.95.3/x86/script/gcc_links-script
install”) on a qnx6 machine.)
13:57:07 STATUS: Script: Executes a post-activate non-blocking script
(rep://qnx/os/dev-2.1.3/script/dev-script install) on a qnx6 machine. (QNX
Neutrino OS Development 2.1.3)
13:57:08 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c “/pkgs/repository/qnx/os/dev-2.1.3/script/dev-script
install”) on a qnx6 machine.)
13:57:08 STATUS: Script: Executes a post-activate blocking script
(/usr/photon/bin/font_install) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:08 STATUS: Script executed due to this package (QNX Photon Chinese
Input Method 2.0.3)
13:57:12 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:12 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:12 STATUS: Script: Executes a post-activate blocking script
(/usr/photon/bin/font_install) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:12 STATUS: Script executed due to this package (QNX Photon Chinese
Input Method 2.0.3)
13:57:16 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:16 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:16 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:16 STATUS: Script executed due to this package (QNX Photon Chinese
Input Method 2.0.3 targeting x86)
13:57:19 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:19 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:19 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:19 STATUS: Script executed due to this package (QNX Photon Chinese
Input Method 2.0.3 targeting x86)
13:57:23 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:23 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:23 STATUS: Script: Executes a post-activate non-blocking script
(/usr/photon/bin/doc_install) on a qnx6 machine, just after any package
with
a “PackageType” of Documentation is activated. (QNX Photon 2.0.3)
13:57:23 STATUS: Script executed due to this package (QNX Photon
Development Documentation 2.0.3)
13:57:26 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c “/usr/photon/bin/doc_install”) on a qnx6 machine, just
after
any package with a “PackageType” of Documentation is activated.)
13:57:26 STATUS: Script: Executes a post-activate non-blocking script
(/usr/photon/bin/doc_install) on a qnx6 machine, just after any package
with
a “PackageType” of Documentation is activated. (QNX Photon 2.0.3)
13:57:26 STATUS: Script executed due to this package (QNX Photon
Development Documentation 2.0.3)
13:57:28 STATUS: Script complete (Executes a post-activate non-blocking
script (ksh -c “/usr/photon/bin/doc_install”) on a qnx6 machine, just
after
any package with a “PackageType” of Documentation is activated.)
13:57:28 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:28 STATUS: Script executed due to this package (QNX Photon Korean
Input Method 2.0.3)
13:57:32 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:32 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:32 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:32 STATUS: Script executed due to this package (QNX Photon Korean
Input Method 2.0.3)
13:57:36 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:36 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:36 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:36 STATUS: Script executed due to this package (QNX Photon Japanese
Input Method 2.0.3)
13:57:39 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:39 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:39 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:39 STATUS: Script executed due to this package (QNX Photon Japanese
Input Method 2.0.3)
13:57:43 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:43 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:43 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:43 STATUS: Script executed due to this package (QNX Photon Japanese
Input Method 2.0.3 targeting x86)
13:57:47 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:47 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:47 STATUS: Script: Executes a post-activate blocking script (ksh -c
“/usr/photon/bin/font_install”) on a qnx6 machine, just after any package
with a “Contains” of font is activated. (QNX Photon 2.0.3)
13:57:47 STATUS: Script executed due to this package (QNX Photon Japanese
Input Method 2.0.3 targeting x86)
13:57:50 DEBUG: Script message not generated [/tmp/script_message.tmp]
13:57:50 STATUS: Script complete (Executes a post-activate blocking
script
(ksh -c “/usr/photon/bin/font_install”) on a qnx6 machine, just after any
package with a “Contains” of font is activated.)
13:57:50 STATUS: Action for Audio DDK 6.2.0 (has been successfully
installed)
13:57:50 STATUS: Action for QNX Momentics NC 6.2.0 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:50 STATUS: Action for Binutils 2.10.1 (has been successfully
installed)
13:57:50 STATUS: Action for Binutils 2.10.1 targeting x86 (has been
successfully installed)
13:57:51 STATUS: Action for Binutils Development 2.10.1 (has been
successfully installed)
13:57:51 STATUS: Action for Binutils Development 2.10.1 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for Binutils Development 2.10.1 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for Bison 1.28 (has been successfully installed)
13:57:51 STATUS: Action for Bison 1.28 targeting x86 (has been
successfully
installed)
13:57:51 STATUS: Action for Character (Serial) DDK 6.2.0 (has been
successfully installed)
13:57:51 STATUS: Action for Common DDK Files 6.2.0 (has been successfully
installed)
13:57:51 STATUS: Action for 6.1.0 CPP Compatibility Libs shared libraries
1.0 (has been successfully installed)
13:57:51 STATUS: Action for 6.1.0 CPP Compatibility Libs shared libraries
1.0 targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for
been successfully installed)
13:57:51 STATUS: Action for Flashplayer Development 4.0 Experimental
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for Flex 2.5.4 (has been successfully installed)
13:57:51 STATUS: Action for Flex 2.5.4 targeting x86 (has been
successfully
installed)
13:57:51 STATUS: Action for GCC 2.95.3 (has been successfully installed)
13:57:51 STATUS: Action for GCC Development 2.95.3 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for GCC Development 2.95.3 (Neutrino tool)
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for GDB 5.0 (has been successfully installed)
13:57:51 STATUS: Action for GDB 5.0 targeting x86 (has been successfully
installed)
13:57:51 STATUS: Action for GDB Development 5.0 (Neutrino tool) targeting
x86 (has been successfully installed)
13:57:51 STATUS: Action for GDB Development 5.0 (Neutrino tool) targeting
x86 (has been successfully installed)
13:57:51 STATUS: Action for Graphics DDK 6.2.0 (has been successfully
installed)
13:57:51 STATUS: Action for GNU C++ shared libraries 2.10 Experimental
(has
been successfully installed)
13:57:51 STATUS: Action for GNU C++ shared libraries 2.10 Experimental
targeting x86 (has been successfully installed)
13:57:51 STATUS: Action for Input DDK 6.2.0 (has been successfully
installed)
13:57:51 STATUS: Action for J9 Virtual Machine 1.5 Experimental (Neutrino
tool) (has been successfully installed)
13:57:51 STATUS: Action for J9 Virtual Machine 1.5 Experimental (Neutrino
tool) (has been successfully installed)
13:57:51 STATUS: Action for J9 Virtual Machine Development 1.5
Experimental
(Neutrino tool) (has been successfully installed)
13:57:51 STATUS: Action for GNU C++ Library Development 2.2.10 (has been
successfully installed)
13:57:51 STATUS: Action for GNU C++ Library Development 2.2.10 targeting
x86 (has been successfully installed)
13:57:51 STATUS: Action for Make 3.79.1 (has been successfully installed)
13:57:52 STATUS: Action for Make 3.79.1 targeting x86 (has been
successfully installed)
13:57:52 STATUS: Action for Mozilla 0.9.8 Beta build 4 (has been
successfully installed)
13:57:52 STATUS: Action for Mozilla 0.9.8 Beta build 4 targeting x86 (has
been successfully installed)
13:57:52 STATUS: Action for Mozilla Static 0.9.8 Beta build 4 (has been
successfully installed)
13:57:52 STATUS: Action for Mozilla Static 0.9.8 Beta build 4 targeting
x86
(has been successfully installed)
13:57:52 STATUS: Action for The Netwide Assembler 0.98 (has been
successfully installed)
13:57:52 STATUS: Action for The Netwide Assembler 0.98 targeting x86 (has
been successfully installed)
13:57:52 STATUS: Action for Network DDK 6.2.0 (has been successfully
installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development 2.1.3 (has been
successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development 2.1.3 targeting
x86
(has been successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development Documentation
2.1.3
(has been successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development Tools 2.1.3 (has
been successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development Tools 2.1.3
targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for QNX Neutrino OS Development Tools 2.1.3
targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for OS shared libraries 2.1.1 Experimental
release
2 (has been successfully installed)
13:57:52 STATUS: Action for OS shared libraries 2.1.1 Experimental
release
2 targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for Citrix ICA Client 3.0 (has been successfully
installed)
13:57:52 STATUS: Action for Citrix ICA Client 3.0 targeting x86 (has been
successfully installed)
13:57:52 STATUS: Action for QNX Photon Remote Display Utilities 2.0.3
(has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Remote Display Utilities 2.0.3
targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for QNX Photon Chinese Input Method 2.0.3 (has
been
successfully installed)
13:57:52 STATUS: Action for QNX Photon Chinese Input Method 2.0.3
targeting
x86 (has been successfully installed)
13:57:52 STATUS: Action for QNX Photon Development 2.0.3 (has been
successfully installed)
13:57:52 STATUS: Action for QNX Photon Development 2.0.3 targeting x86
(has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Development Documentation 2.0.3
(has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Development Tools 2.0.3 (has been
successfully installed)
13:57:52 STATUS: Action for QNX Photon devtools 2.0.3 targeting x86 (has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Card Games and Puzzles 2.0.3 (has
been successfully installed)
13:57:52 STATUS: Action for QNX Photon Card Games and Puzzles 2.0.3
targeting x86 (has been successfully installed)
13:57:52 STATUS: Action for QNX Photon Korean Input Method 2.0.3 (has
been
successfully installed)
13:57:53 STATUS: Action for QNX Photon Japanese Input Method 2.0.3 (has
been successfully installed)
13:57:53 STATUS: Action for QNX Photon Japanese Input Method 2.0.3
targeting x86 (has been successfully installed)
13:57:53 STATUS: Action for Printer DDK 6.2.0 (has been successfully
installed)
13:57:53 STATUS: Action for USB DDK 6.2.0 (has been successfully
installed)
13:57:53 STATUS: Updating the Launch menu (launchmenu_notify)
13:57:55 STATUS: Saving installed QRM to
/etc/system/package/installed/b19f8bc4c5fff2f0ea12229dffe594ab.qrm (“User
Repository” at /pkgs/repository)
13:57:55 STATUS: Actions completed
14:00:33 STATUS: Removed temporary directory (/tmp/plib241674)
14:00:33 STATUS: Removed temporary directory (/tmp/pliba41674)
14:00:33 STATUS: Session closed
14:00:33 STATUS: Log file closed on 2002-11-18“Jerry Chappell” <> jchappell@qnx.com> > wrote in message
news:arb11f$g2s$> 1@nntp.qnx.com> …
Bob, can you please outline the steps you took in using cl-installer to
perform your installation? And if possible, post the log file
(/etc/system/package/session.log) from your cl-installer session.
Thanks.Jerry Chappell
“Bob Borchardt” <> r.p.borchardt@larc.nasa.gov> > wrote in message
news:ar85q5$3jb$> 1@inn.qnx.com> …
I have a HP Pavilion zt1135 laptop that has a video chipset
incompatible
with QNX 6.x.x. It locks up during installation on 1st attempt to go
into
photon. That would be OK since I don’t need photon for what I want to
do,
and the base system is installed at that point. However,
‘cl-installer’
does not install any development tools from the CD (no gcc, qcc, etc).
How
do I install the dev tools and configure the network??? I am using the
laptop as a self hosted system. BTW, why is the installation so
focused
on
photon? There must be a way to do a console only install…
\