VIA VT6105 Support

QNX Newsgroups (Archives) qnx.rtos
1

Is this ethernet chip (VIA VT6105) supported under QNX 6.2.1 or 6.3.0 ?
(integrated dual ethernet on VIA EPIA CL6000 mini ITX board)

Thanks
David

2

According to the Via web site, this chip is Via Rhine compatible, so
hopefully it should work with the via-rhine driver. You might have to
specify the vendor and device IDs on the command line.

“David Brdièka” <dbrdicka@retia.cz> wrote in message
news:cibha7$m2c$1@inn.qnx.com…

Is this ethernet chip (VIA VT6105) supported under QNX 6.2.1 or 6.3.0 ?
(integrated dual ethernet on VIA EPIA CL6000 mini ITX board)

Thanks
David

3

Hugh Brown wrote:

According to the Via web site, this chip is Via Rhine compatible, so
hopefully it should work with the via-rhine driver. You might have to
specify the vendor and device IDs on the command line.

Yes, it works with the via-rhine driver … but we haven’t to fiddle
around with the io-net parameters.

We have just to add the following line to the Via-rhine section of the
file /etc/config/enum/devices/net:

device(pci, ven=$(PCI_VEND_VIA), dev=3106) # RHINE III

That’s all :slight_smile:


Regards

Armin


“David Brdièka” <> dbrdicka@retia.cz> > wrote in message
news:cibha7$m2c$> 1@inn.qnx.com> …

Is this ethernet chip (VIA VT6105) supported under QNX 6.2.1 or 6.3.0 ?
(integrated dual ethernet on VIA EPIA CL6000 mini ITX board)

Thanks
David

\