Substitute for Dynapro SC3-OEM touchscreen controller

QNX Newsgroups (Archives) qnx.qnx4
1

Hi,

I wonder if anyone has had problems finding a substitute for the SC3-OEM
touchscreen controller from Dynapro which has now been obsolete for quite a
while.

I’m having troubles finding anything compatible with the drivers in QNX4.25.

Perhaps someone has made a touchscreen controller themselves? Perhaps a
driver for a newer controller?

Thanks for any help

Regards,
Lars

2

I have driver for SC4. It was build with use of input ddk from QNX.

Pavol Kycina

“Lars Skade” <larsskade@telefonica.net> wrote in message
news:d5ntm7$4iu$1@inn.qnx.com…

Hi,

I wonder if anyone has had problems finding a substitute for the SC3-OEM
touchscreen controller from Dynapro which has now been obsolete for quite
a
while.

I’m having troubles finding anything compatible with the drivers in
QNX4.25.

Perhaps someone has made a touchscreen controller themselves? Perhaps a
driver for a newer controller?

Thanks for any help

Regards,
Lars

3

Hi Pavol,

3M told me the QNX Dynapro driver I used on the SC3 ought to be compatible
with the SC4 too as the protocols are the same on the two boards. I’m
currently waiting for a SC4 controller to try this out but if I understand
you right 3M are wrong!

Is your SC4 driver openly available?

I’ve been told the SC4 controller is just about going obsolete. Anyone know
of other substitutes?

Thanks,
Lars Skade

“Pavol Kycina” <xkycina@microstep-hdo.sk> escribió en el mensaje
news:42803dc7$1@news.microstep-hdo.sk…

I have driver for SC4. It was build with use of input ddk from QNX.

Pavol Kycina

“Lars Skade” <> larsskade@telefonica.net> > wrote in message
news:d5ntm7$4iu$> 1@inn.qnx.com> …
Hi,

I wonder if anyone has had problems finding a substitute for the SC3-OEM
touchscreen controller from Dynapro which has now been obsolete for quite
a
while.

I’m having troubles finding anything compatible with the drivers in
QNX4.25.

Perhaps someone has made a touchscreen controller themselves? Perhaps a
driver for a newer controller?

Thanks for any help

Regards,
Lars
\

4

“Lars Skade” <larsskade@telefonica.net> wrote in message
news:d5pm1u$d63$1@inn.qnx.com…

Hi Pavol,

3M told me the QNX Dynapro driver I used on the SC3 ought to be compatible
with the SC4 too as the protocols are the same on the two boards. I’m
currently waiting for a SC4 controller to try this out but if I understand
you right 3M are wrong!

Is your SC4 driver openly available?

I don’t know its legal status… I obtained a copy of Input DDK from QNX (it
was beta version…) to “do it yourself”.
I can post you my changes (to make it work with SC4), but I would suggest
you get your copy of Input DDK from QNX.

I’ve been told the SC4 controller is just about going obsolete. Anyone
know
of other substitutes?

Thanks,
Lars Skade

“Pavol Kycina” <> xkycina@microstep-hdo.sk> > escribió en el mensaje
news:42803dc7$> 1@news.microstep-hdo.sk> …
I have driver for SC4. It was build with use of input ddk from QNX.

Pavol Kycina

“Lars Skade” <> larsskade@telefonica.net> > wrote in message
news:d5ntm7$4iu$> 1@inn.qnx.com> …
Hi,

I wonder if anyone has had problems finding a substitute for the
SC3-OEM
touchscreen controller from Dynapro which has now been obsolete for
quite
a
while.

I’m having troubles finding anything compatible with the drivers in
QNX4.25.

Perhaps someone has made a touchscreen controller themselves? Perhaps a
driver for a newer controller?

Thanks for any help

Regards,
Lars


\

5

Hi Pavol,

I would love to have a copy of your changes. Meanwhile I’ll try to get my
hands on the input DDK

Thanks a lot

Lars

“Pavol Kycina” <xkycina@microstep-hdo.sk> escribió en el mensaje
news:42883070$1@news.microstep-hdo.sk…

“Lars Skade” <> larsskade@telefonica.net> > wrote in message
news:d5pm1u$d63$> 1@inn.qnx.com> …
Hi Pavol,

3M told me the QNX Dynapro driver I used on the SC3 ought to be
compatible
with the SC4 too as the protocols are the same on the two boards. I’m
currently waiting for a SC4 controller to try this out but if I
understand
you right 3M are wrong!

Is your SC4 driver openly available?

I don’t know its legal status… I obtained a copy of Input DDK from QNX
(it
was beta version…) to “do it yourself”.
I can post you my changes (to make it work with SC4), but I would suggest
you get your copy of Input DDK from QNX.


I’ve been told the SC4 controller is just about going obsolete. Anyone
know
of other substitutes?

Thanks,
Lars Skade

“Pavol Kycina” <> xkycina@microstep-hdo.sk> > escribió en el mensaje
news:42803dc7$> 1@news.microstep-hdo.sk> …
I have driver for SC4. It was build with use of input ddk from QNX.

Pavol Kycina

“Lars Skade” <> larsskade@telefonica.net> > wrote in message
news:d5ntm7$4iu$> 1@inn.qnx.com> …
Hi,

I wonder if anyone has had problems finding a substitute for the
SC3-OEM
touchscreen controller from Dynapro which has now been obsolete for
quite
a
while.

I’m having troubles finding anything compatible with the drivers in
QNX4.25.

Perhaps someone has made a touchscreen controller themselves? Perhaps
a
driver for a newer controller?

Thanks for any help

Regards,
Lars




\

6

Ok, not a problem. When you have Input DDK, I will mail it to you.

Pavol Kycina


“Lars Skade” <larsskade@telefonica.net> wrote in message
news:d6cbp9$dcb$1@inn.qnx.com…

Hi Pavol,

I would love to have a copy of your changes. Meanwhile I’ll try to get my
hands on the input DDK

Thanks a lot

Lars

“Pavol Kycina” <> xkycina@microstep-hdo.sk> > escribió en el mensaje
news:42883070$> 1@news.microstep-hdo.sk> …
“Lars Skade” <> larsskade@telefonica.net> > wrote in message
news:d5pm1u$d63$> 1@inn.qnx.com> …
Hi Pavol,

3M told me the QNX Dynapro driver I used on the SC3 ought to be
compatible
with the SC4 too as the protocols are the same on the two boards. I’m
currently waiting for a SC4 controller to try this out but if I
understand
you right 3M are wrong!

Is your SC4 driver openly available?

I don’t know its legal status… I obtained a copy of Input DDK from QNX
(it
was beta version…) to “do it yourself”.
I can post you my changes (to make it work with SC4), but I would
suggest
you get your copy of Input DDK from QNX.


I’ve been told the SC4 controller is just about going obsolete. Anyone
know
of other substitutes?

Thanks,
Lars Skade

“Pavol Kycina” <> xkycina@microstep-hdo.sk> > escribió en el mensaje
news:42803dc7$> 1@news.microstep-hdo.sk> …
I have driver for SC4. It was build with use of input ddk from QNX.

Pavol Kycina

“Lars Skade” <> larsskade@telefonica.net> > wrote in message
news:d5ntm7$4iu$> 1@inn.qnx.com> …
Hi,

I wonder if anyone has had problems finding a substitute for the
SC3-OEM
touchscreen controller from Dynapro which has now been obsolete for
quite
a
while.

I’m having troubles finding anything compatible with the drivers in
QNX4.25.

Perhaps someone has made a touchscreen controller themselves?
Perhaps
a
driver for a newer controller?

Thanks for any help

Regards,
Lars






\

7

Please can I have a copy of your SC4 driver for QNX4. I am testing a
3M Chassis touch display (Dynopro NFI) and I believe it needs a SC4
driver.

8

Sent via email (for testing purposes).

Pavol Kycina

“mbrean” <mbrean@silvertech.co-dot-uk.no-spam.invalid> wrote in message
news:dbg4rd$j02$1@inn.qnx.com…

Please can I have a copy of your SC4 driver for QNX4. I am testing a
3M Chassis touch display (Dynopro NFI) and I believe it needs a SC4
driver.